Date: Fri, 17 Nov 2006 07:05:28 +0000 From: Joe Holden <joe@joeholden.co.uk> To: freebsd-stable@freebsd.org Subject: (Seemingly) Spontaneous rebooting Message-ID: <455D5F38.4060208@joeholden.co.uk>
next in thread | raw e-mail | index | archive | help
Hi, i'm observing random reboots on a dedicated machine I have with 1&1. I have included as much information as I can think of, if there is anything else I can provide, please ask. dmesg: claire# dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #1: Sun Nov 5 14:16:45 UTC 2006 root@claire.ber.rewt.org.uk:/usr/obj/usr/src/sys/claire Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2404.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x400<CNTX-ID> real memory = 1065353216 (1016 MB) avail memory = 1033650176 (985 MB) kbd1 at kbdmux0 cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 4 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: No matching entry for 0.16.INTA $PIR: No matching entry for 0.16.INTB $PIR: No matching entry for 0.16.INTD $PIR: No matching entry for 0.18.INTA agp0: <VIA 8703 (P4M266x/P4N266) host to PCI bridge> mem 0xea000000-0xea3fffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <serial bus, USB> at device 16.0 (no driver attached) pci0: <serial bus, USB> at device 16.1 (no driver attached) pci0: <serial bus, USB> at device 16.3 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xdc00-0xdc0f at device 17.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem 0xea401000-0xea4010ff irq 15 at device 18.0 on pci0 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:40:63:c3:72:02 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 2404116192 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <Seagate ST380021A 3.05> at ata0-master UDMA100 Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 556 files 20 WARNING: /var was not properly dismounted uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 15 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xea400000-0xea4000ff irq 11 at device 16.3 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <VIA VT6202 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pciconf -lv: claire# pciconf -lv agp0@pci0:0:0: class=0x060000 card=0xa0031106 chip=0x31481106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8751 ProSavageDDR P4M266 System Controller' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0911106 rev=0x00 hdr=0x01 vendor = 'VIA Technologies Inc' device = 'VT8633 Apollo Pro 266 CPU to AGP Controller' class = bridge subclass = PCI-PCI uhci0@pci0:16:0: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB uhci1@pci0:16:1: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB ehci0@pci0:16:3: class=0x0c0320 card=0x31041106 chip=0x31041106 rev=0x82 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6202 USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB isab0@pci0:17:0: class=0x060100 card=0xa0031106 chip=0x31771106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8235 PCI to ISA Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:17:1: class=0x01018a card=0xa0031106 chip=0x05711106 rev=0x06 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxx EIDE Controller (All VIA Chipsets)' class = mass storage subclass = ATA vr0@pci0:18:0: class=0x020000 card=0x01061106 chip=0x30651106 rev=0x74 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6102 Rhine II PCI Fast Ethernet Controller' class = network subclass = ethernet none0@pci1:0:0: class=0x030000 card=0xa0031106 chip=0x8d045333 rev=0x00 hdr=0x00 vendor = 'S3 Graphics Co., Ltd.' device = '86C420 ProSavage DDR' class = display subclass = VGA uname -a: claire# uname -a FreeBSD claire.ber.rewt.org.uk 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: Sun Nov 5 14:16:45 UTC 2006 root@claire.ber.rewt.org.uk:/usr/obj/usr/src/sys/claire i386 df -h: claire# df -h Filesystem Size Used Avail Capacity Mounted on /dev/ad0s1a 496M 61M 395M 13% / devfs 1.0K 1.0K 0B 100% /dev /dev/ad0s1e 496M 18K 456M 0% /tmp /dev/ad0s1f 70G 5.0G 59G 8% /usr /dev/ad0s1d 1.1G 102M 908M 10% /var devfs 1.0K 1.0K 0B 100% /var/named/dev As a side note: If anyone is wanting to know how to convert their evil 1&1 linux machine to FreeBSD, send me an email and i'll send you the info (I intend to write an article on this eventually) TIA, Joe
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?455D5F38.4060208>