Date: Thu, 15 Feb 2007 23:14:49 -0800 From: Stephen Hurd <shurd@sasktel.net> To: freebsd-acpi@FreeBSD.org Subject: HP LH3000r hangs on boot with ACPI enabled Message-ID: <45D559E9.9060806@sasktel.net>
next in thread | raw e-mail | index | archive | help
System does not complete the boot (hang) with ACPI enabled using FreeBSD
6.2-RELEASE
Capture of console from boot -v with ACPI enabled:
SMAP type=01 base=0000000000000000 len=000000000009e400
SMAP type=02 base=000000000009e400 len=0000000000001c00
SMAP type=02 base=00000000000e6400 len=0000000000019c00
SMAP type=01 base=0000000000100000 len=0000000027ef0000
SMAP type=03 base=0000000027ff0000 len=000000000000fc00
SMAP type=04 base=0000000027fffc00 len=0000000000000400
SMAP type=02 base=00000000fec00000 len=0000000000100000
SMAP type=02 base=00000000fee00000 len=0000000000100000
SMAP type=02 base=00000000fffe6400 len=0000000000019c00
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Fri Jan 19 23:25:14 PST 2007
root@freebsd.mshome.net:/usr/obj/usr/src/sys/LH3000r
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08b5194.
MP Configuration Table version 1.4 found at 0xc009e560
Table 'FACP' at 0x27fffadd
Table 'APIC' at 0x27fffb51
MADT: Found table at 0x27fffb51
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 1 ACPI ID 0: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
INTR: Adding local APIC 1 as a target
ACPI APIC Table: <PTLTD APIC >
Calibrating clock(s) ... i8254 clock: 1193046 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 986374022 Hz
CPU: Intel Pentium III (986.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 671023104 (639 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000002746afff, 646197248 bytes (157763 pages)
avail memory = 647278592 (617 MB)
INTR: Adding local APIC 0 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00f7670
bios32: Entry = 0xfd784 (c00fd784) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd670+0x339
pnpbios: Found PnP BIOS data at 0xc00f7640
pnpbios: Entry = f0000:a012 Rev = 1.0
pnpbios: OEM ID 7c2f022
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000
ioapic1: intpin 0 -> PCI IRQ 16 (level, low)
ioapic1: intpin 1 -> PCI IRQ 17 (level, low)
ioapic1: intpin 2 -> PCI IRQ 18 (level, low)
ioapic1: intpin 3 -> PCI IRQ 19 (level, low)
ioapic1: intpin 4 -> PCI IRQ 20 (level, low)
ioapic1: intpin 5 -> PCI IRQ 21 (level, low)
ioapic1: intpin 6 -> PCI IRQ 22 (level, low)
ioapic1: intpin 7 -> PCI IRQ 23 (level, low)
ioapic1: intpin 8 -> PCI IRQ 24 (level, low)
ioapic1: intpin 9 -> PCI IRQ 25 (level, low)
ioapic1: intpin 10 -> PCI IRQ 26 (level, low)
ioapic1: intpin 11 -> PCI IRQ 27 (level, low)
ioapic1: intpin 12 -> PCI IRQ 28 (level, low)
ioapic1: intpin 13 -> PCI IRQ 29 (level, low)
ioapic1: intpin 14 -> PCI IRQ 30 (level, low)
ioapic1: intpin 15 -> PCI IRQ 31 (level, low)
MADT: Interrupt override: source 7, irq 7
ioapic0: intpin 7 trigger: level
ioapic0: intpin 7 polarity: low
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
MADT: Interrupt override: source 10, irq 10
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: low
MADT: Interrupt override: source 11, irq 11
ioapic0: intpin 11 trigger: level
ioapic0: intpin 11 polarity: low
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
io: <I/O>
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00
00 01 20 00 00 01 0b 01 00 01 21 01 00 01 2a 01
00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01
14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
VESA: 40 mode(s) found
VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc07c1522 (1000022)
VESA: ATI MACH64
VESA: ATI Technologies Inc. MACH64GT 01.00
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: INT 16 interface
acpi0: <PTLTD HWPC207> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80012164
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
Found $PIR table, 17 entries at 0xc00fdeb0
PCI-Only Interrupts: 9
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 3 A 0x1c 3 4 5 7 9 10 11 12 14 15
slot 7 0 3 B 0x1c 3 4 5 7 9 10 11 12 14 15
slot 7 0 3 C 0x1c 3 4 5 7 9 10 11 12 14 15
slot 7 0 3 D 0x1c 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 A 0x1d 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 B 0x1d 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 C 0x1d 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 D 0x1d 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x14 3 4 5 7 9 10 11 12 14 15
embedded 0 6 A 0x13 3 4 5 7 9 10 11 12 14 15
embedded 1 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 C 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 D 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 2 A 0x11 3 4 5 7 9 10 11 12 14 15
embedded 1 2 B 0x12 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 A 0x55 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 B 0x56 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 C 0x57 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 D 0x58 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 A 0x1b 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 B 0x1b 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 C 0x1b 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 D 0x1b 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 A 0x16 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 B 0x4e 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 C 0x4f 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 D 0x50 3 4 5 7 9 10 11 12 14 15
embedded 1 3 A 0x15 3 4 5 7 9 10 11 12 14 15
embedded 2 5 A 0x18 3 4 5 7 9 10 11 12 14 15
embedded 2 5 B 0x19 3 4 5 7 9 10 11 12 14 15
embedded 2 7 A 0x1a 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 D 0x64 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 A 0x5d 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 B 0x5e 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 C 0x5f 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 A 0x17 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 B 0x5a 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 C 0x5b 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 D 0x5c 3 4 5 7 9 10 11 12 14 15
embedded 0 15 A 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 15 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 15 C 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
ACPI-0347: *** Error: During resolve, Unknown Reference opcode 2D
(AE_NOT_CONFIGURED) in 0xc3c5d600
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.ISA_.LINK]
(Node 0xc3bcdbc0), AE_AML_INTERNAL
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.INIT]
(Node 0xc3b78480), AE_AML_INTERNAL
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0._INI]
(Node 0xc3b78500), AE_AML_INTERNAL
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd09e5000 pa 0x9d000
can't fetch resources for \_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPE
ACPI timer: 0/3 0/1023 0/3 0/3 0/3 0/3 0/3 0/3 0/4 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1208-0x120b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 11
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 9 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 11
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 10 11 12 14 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 10 11 12 14 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 10 11 12 14 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 10 11 12 14 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 10 11 12 14 15
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 10 11 12 14 15
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link12: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link12: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link12: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link13: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link13: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link13: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link14: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link14: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link14: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link15: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link15: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link15: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link16: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link16: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link16: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link17: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 none
pci_link17: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 none
pci_link17: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 none
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f8f81000, size 12, enabled
map[14]: type 4, range 32, base 00001800, size 6, enabled
map[18]: type 1, range 32, base fa000000, size 20, enabled
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4759, revid=0x7a
bus=0, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base f9000000, size 24, enabled
map[14]: type 4, range 32, base 00001400, size 8, enabled
map[18]: type 1, range 32, base f8f82000, size 12, enabled
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 19
found-> vendor=0x1166, dev=0x0200, revid=0x4f
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00001040, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001840, size 4, enabled
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem
0xf8f81000-0xf8f81fff,0xfa000000-0xfa0fffff irq 18 at device 6.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8f81000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 103c 10ca 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:30:6e:00:a8:a9
ioapic1: routing intpin 2 (PCI IRQ 18) to vector 49
fxp0: [MPSAFE]
pci0: <display, VGA> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1040-0x104f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1840-0x184f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1840
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=7f
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=00 stat1=ff devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x103c, dev=0x1219, revid=0x0b
bus=1, slot=2, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 00002000, size 8, enabled
pcib1: matched entry for 1.2.INTA
pcib1: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x103c, dev=0x121a, revid=0x0b
bus=1, slot=2, func=1
class=0c-06-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[10]: type 4, range 32, base 00002400, size 8, enabled
pcib1: matched entry for 1.2.INTB
pcib1: slot 2 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x0964, revid=0x01
bus=1, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x8086, dev=0x1964, revid=0x01
bus=1, slot=3, func=1
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0356, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base fb000000, size 24, enabled
pcib1: matched entry for 1.3.INTA
pcib1: slot 3 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x0960, revid=0x05
bus=1, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0347, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1960, revid=0x05
bus=1, slot=4, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0316, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base fa400000, size 22, enabled
pcib1: matched entry for 1.4.INTA
pcib1: slot 4 INTA hardwired to IRQ 29
pci1: <base peripheral> at device 2.0 (no driver attached)
pci1: <serial bus> at device 2.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xfa100000-0xfa1fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x14e4, dev=0x1676, revid=0x01
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base fa100000, size 16, enabled
pcib2: (null) requested memory range 0xfa100000-0xfa10ffff: good
pcib2: matched entry for 2.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 26
found-> vendor=0x1000, dev=0x000b, revid=0x06
bus=2, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003000, size 8, enabled
pcib2: (null) requested I/O range 0x3000-0x30ff: in range
map[14]: type 1, range 64, base fa11c000, size 10, enabled
pcib2: (null) requested memory range 0xfa11c000-0xfa11c3ff: good
map[1c]: type 1, range 64, base fa118000, size 13, enabled
pcib2: (null) requested memory range 0xfa118000-0xfa119fff: good
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 20
found-> vendor=0x1000, dev=0x000b, revid=0x06
bus=2, slot=5, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003400, size 8, enabled
pcib2: (null) requested I/O range 0x3400-0x34ff: in range
map[14]: type 1, range 64, base fa11c400, size 10, enabled
pcib2: (null) requested memory range 0xfa11c400-0xfa11c7ff: good
map[1c]: type 1, range 64, base fa11a000, size 13, enabled
pcib2: (null) requested memory range 0xfa11a000-0xfa11bfff: good
pcib2: matched entry for 2.5.INTB
pcib2: slot 5 INTB hardwired to IRQ 21
found-> vendor=0x9004, dev=0x8078, revid=0x02
bus=2, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=7
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003800, size 8, enabled
pcib2: (null) requested I/O range 0x3800-0x38ff: in range
map[14]: type 1, range 32, base fa11d000, size 12, enabled
pcib2: (null) requested memory range 0xfa11d000-0xfa11dfff: good
pcib2: matched entry for 2.7.INTA
pcib2: slot 7 INTA hardwired to IRQ 23
found-> vendor=0x103c, dev=0x10c1, revid=0xa0
bus=2, slot=8, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0142, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fa110000, size 15, enabled
pcib2: (null) requested memory range 0xfa110000-0xfa117fff: good
pci2: <network, ethernet> at device 2.0 (no driver attached)
sym0: <896> port 0x3000-0x30ff mem
0xfa11c000-0xfa11c3ff,0xfa118000-0xfa119fff irq 20 at device 5.0 on pci2
sym0: Reserved 0x400 bytes for rid 0x14 type 3 at 0xfa11c000
sym0: Reserved 0x2000 bytes for rid 0x1c type 3 at 0xfa118000
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/a0/01/00/24
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym0: Delay (GEN=11): 258 msec, 34450 KHz
sym0: Delay (GEN=11): 280 msec, 31744 KHz
sym0: Delay (GEN=11): 281 msec, 31631 KHz
ioapic1: routing intpin 4 (PCI IRQ 20) to vector 52
sym0: [GIANT-LOCKED]
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
sym1: <896> port 0x3400-0x34ff mem
0xfa11c400-0xfa11c7ff,0xfa11a000-0xfa11bfff irq 21 at device 5.1 on pci2
sym1: Reserved 0x400 bytes for rid 0x14 type 3 at 0xfa11c400
sym1: Reserved 0x2000 bytes for rid 0x1c type 3 at 0xfa11a000
sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/a0/01/00/24
sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym1: Delay (GEN=11): 258 msec, 34450 KHz
sym1: Delay (GEN=11): 280 msec, 31744 KHz
sym1: Delay (GEN=11): 281 msec, 31631 KHz
ioapic1: routing intpin 5 (PCI IRQ 21) to vector 53
sym1: [GIANT-LOCKED]
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x3800-0x38ff mem
0xfa11d000-0xfa11dfff irq 23 at device 7.0 on pci2
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3800
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 441 instructions downloaded
ahc0: Features 0x10005, Bugs 0x11, Flags 0x28485540
ioapic1: routing intpin 7 (PCI IRQ 23) to vector 54
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci2: <base peripheral> at device 8.0 (no driver attached)
pci1: <memory> at device 3.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: could not get PCI interrupt routing table for \_SB_.PCI1.SL60 -
AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
amr0: <LSILogic MegaRAID 1.53> mem 0xfa400000-0xfa7fffff irq 29 at
device 4.1 on pci1
amr0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xfa400000
ioapic1: routing intpin 13 (PCI IRQ 29) to vector 55
amr0: [MPSAFE]
amr0: <HP NetRaid 3si> Firmware C.02.08, BIOS B.02.04, 16MB RAM
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 02 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio1: irq maps: 0x4001 0x4009 0x4001 0x4001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 60
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ahc_isa_probe 0: ioport 0xc00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff,0xc9800-0xcb7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
linsysfs registered
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 65757907 hz
Timecounter "TSC" frequency 986374022 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ROSB4 chip
acd0: <HITACHI CDR-8435/0010> CDROM drive at ata0 as master
acd0: read 5512KB/s (5512KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 69462MB (142258176 sectors) RAID 0 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 208386MB (426774528 sectors) RAID 0 (optimal)
GEOM: new disk amrd0
GEOM: new disk amrd1
*** HANG GOES HERE ***
Capture of console from boot -v with ACPI disabled:
SMAP type=01 base=0000000000000000 len=000000000009e400
SMAP type=02 base=000000000009e400 len=0000000000001c00
SMAP type=02 base=00000000000e6400 len=0000000000019c00
SMAP type=01 base=0000000000100000 len=0000000027ef0000
SMAP type=03 base=0000000027ff0000 len=000000000000fc00
SMAP type=04 base=0000000027fffc00 len=0000000000000400
SMAP type=02 base=00000000fec00000 len=0000000000100000
SMAP type=02 base=00000000fee00000 len=0000000000100000
SMAP type=02 base=00000000fffe6400 len=0000000000019c00
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Fri Jan 19 23:25:14 PST 2007
root@freebsd.mshome.net:/usr/obj/usr/src/sys/LH3000r
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0850000.
Calibrating clock(s) ... i8254 clock: 1193046 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 986375221 Hz
CPU: Intel Pentium III (986.38-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 671023104 (639 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000002746afff, 646197248 bytes (157763 pages)
avail memory = 647294976 (617 MB)
MP Configuration Table version 1.4 found at 0xc009e560
APIC: Using the MPTable enumerator.
SMP: Added CPU 1 (BSP)
SMP: Added CPU 0 (AP)
MPTable: <INTR: Adding local APIC 1 as a target
HP LH 3000 >
INTR: Adding local APIC 0 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00f7670
bios32: Entry = 0xfd784 (c00fd784) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd670+0x339
pnpbios: Found PnP BIOS data at 0xc00f7640
pnpbios: Entry = f0000:a012 Rev = 1.0
pnpbios: OEM ID 7c2f022
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic1: Assuming intbase of 16
ioapic1: intpin 0 -> PCI IRQ 16 (level, low)
ioapic1: intpin 1 -> PCI IRQ 17 (level, low)
ioapic1: intpin 2 -> PCI IRQ 18 (level, low)
ioapic1: intpin 3 -> PCI IRQ 19 (level, low)
ioapic1: intpin 4 -> PCI IRQ 20 (level, low)
ioapic1: intpin 5 -> PCI IRQ 21 (level, low)
ioapic1: intpin 6 -> PCI IRQ 22 (level, low)
ioapic1: intpin 7 -> PCI IRQ 23 (level, low)
ioapic1: intpin 8 -> PCI IRQ 24 (level, low)
ioapic1: intpin 9 -> PCI IRQ 25 (level, low)
ioapic1: intpin 10 -> PCI IRQ 26 (level, low)
ioapic1: intpin 11 -> PCI IRQ 27 (level, low)
ioapic1: intpin 12 -> PCI IRQ 28 (level, low)
ioapic1: intpin 13 -> PCI IRQ 29 (level, low)
ioapic1: intpin 14 -> PCI IRQ 30 (level, low)
ioapic1: intpin 15 -> PCI IRQ 31 (level, low)
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 bus ISA
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: level
ioapic0: intpin 7 polarity: low
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 bus ISA
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0: intpin 10 bus ISA
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: low
ioapic0: intpin 11 bus ISA
ioapic0: intpin 11 trigger: level
ioapic0: intpin 11 polarity: low
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic1: intpin 2 bus PCI
ioapic1: intpin 2 trigger: level
ioapic1: intpin 2 polarity: low
ioapic1: intpin 3 bus PCI
ioapic1: intpin 3 trigger: level
ioapic1: intpin 3 polarity: low
ioapic1: intpin 0 bus PCI
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: low
ioapic1: intpin 1 bus PCI
ioapic1: intpin 1 trigger: level
ioapic1: intpin 1 polarity: low
ioapic1: intpin 4 bus PCI
ioapic1: intpin 4 trigger: level
ioapic1: intpin 4 polarity: low
ioapic1: intpin 5 bus PCI
ioapic1: intpin 5 trigger: level
ioapic1: intpin 5 polarity: low
ioapic1: intpin 6 bus PCI
ioapic1: intpin 6 trigger: level
ioapic1: intpin 6 polarity: low
ioapic1: intpin 7 bus PCI
ioapic1: intpin 7 trigger: level
ioapic1: intpin 7 polarity: low
ioapic1: intpin 8 bus PCI
ioapic1: intpin 8 trigger: level
ioapic1: intpin 8 polarity: low
ioapic1: intpin 9 bus PCI
ioapic1: intpin 9 trigger: level
ioapic1: intpin 9 polarity: low
ioapic1: intpin 0 bus PCI
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: low
ioapic1: intpin 0 bus PCI
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: low
ioapic1: intpin 0 bus PCI
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: low
ioapic1: intpin 0 bus PCI
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: low
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00
00 01 20 00 00 01 0b 01 00 01 21 01 00 01 2a 01
00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01
14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
VESA: 40 mode(s) found
VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc07c1522 (1000022)
VESA: ATI MACH64
VESA: ATI Technologies Inc. MACH64GT 01.00
nfslock: pseudo-device
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80012164
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
Found $PIR table, 17 entries at 0xc00fdeb0
PCI-Only Interrupts: 9
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 3 A 0x1c 3 4 5 7 9 10 11 12 14 15
slot 7 0 3 B 0x1c 3 4 5 7 9 10 11 12 14 15
slot 7 0 3 C 0x1c 3 4 5 7 9 10 11 12 14 15
slot 7 0 3 D 0x1c 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 A 0x1d 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 B 0x1d 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 C 0x1d 3 4 5 7 9 10 11 12 14 15
slot 8 0 2 D 0x1d 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x14 3 4 5 7 9 10 11 12 14 15
embedded 0 6 A 0x13 3 4 5 7 9 10 11 12 14 15
embedded 1 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 C 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 D 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 1 2 A 0x11 3 4 5 7 9 10 11 12 14 15
embedded 1 2 B 0x12 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 A 0x55 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 B 0x56 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 C 0x57 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 D 0x58 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 A 0x1b 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 B 0x1b 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 C 0x1b 3 4 5 7 9 10 11 12 14 15
slot 5 1 5 D 0x1b 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 A 0x16 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 B 0x4e 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 C 0x4f 3 4 5 7 9 10 11 12 14 15
slot 6 1 4 D 0x50 3 4 5 7 9 10 11 12 14 15
embedded 1 3 A 0x15 3 4 5 7 9 10 11 12 14 15
embedded 2 5 A 0x18 3 4 5 7 9 10 11 12 14 15
embedded 2 5 B 0x19 3 4 5 7 9 10 11 12 14 15
embedded 2 7 A 0x1a 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 1 2 4 D 0x64 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 A 0x5d 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 B 0x5e 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 C 0x5f 3 4 5 7 9 10 11 12 14 15
slot 2 2 3 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 A 0x17 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 B 0x5a 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 C 0x5b 3 4 5 7 9 10 11 12 14 15
slot 3 2 2 D 0x5c 3 4 5 7 9 10 11 12 14 15
embedded 0 15 A 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 15 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 15 C 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f8f81000, size 12, enabled
map[14]: type 4, range 32, base 00001800, size 6, enabled
map[18]: type 1, range 32, base fa000000, size 20, enabled
pcib0: slot 6 INTA routed to irq 18
found-> vendor=0x1002, dev=0x4759, revid=0x7a
bus=0, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base f9000000, size 24, enabled
map[14]: type 4, range 32, base 00001400, size 8, enabled
map[18]: type 1, range 32, base f8f82000, size 12, enabled
pcib0: slot 7 INTA routed to irq 19
found-> vendor=0x1166, dev=0x0200, revid=0x4f
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00001040, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001840, size 4, enabled
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem
0xf8f81000-0xf8f81fff,0xfa000000-0xfa0fffff irq 18 at device 6.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8f81000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 103c 10ca 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:30:6e:00:a8:a9
ioapic1: routing intpin 2 (PCI IRQ 18) to vector 48
fxp0: [MPSAFE]
pci0: <display, VGA> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1040-0x104f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1840-0x184f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1840
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=7f
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=00 stat1=ff devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x103c, dev=0x1219, revid=0x0b
bus=1, slot=2, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 00002000, size 8, enabled
pcib1: slot 2 INTA routed to irq 16
found-> vendor=0x103c, dev=0x121a, revid=0x0b
bus=1, slot=2, func=1
class=0c-06-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[10]: type 4, range 32, base 00002400, size 8, enabled
pcib1: slot 2 INTB routed to irq 17
found-> vendor=0x8086, dev=0x0964, revid=0x01
bus=1, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x8086, dev=0x1964, revid=0x01
bus=1, slot=3, func=1
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0356, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base fb000000, size 24, enabled
pcib1: slot 3 INTA routed to irq 20
found-> vendor=0x8086, dev=0x0960, revid=0x05
bus=1, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0347, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1960, revid=0x05
bus=1, slot=4, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0316, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base fa400000, size 22, enabled
pcib1: slot 4 INTA routed to irq 21
pci1: <base peripheral> at device 2.0 (no driver attached)
pci1: <serial bus> at device 2.1 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 3.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xfa100000-0xfa1fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x14e4, dev=0x1676, revid=0x01
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base fa100000, size 16, enabled
pcib2: (null) requested memory range 0xfa100000-0xfa10ffff: good
pcib2: slot 2 INTA routed to irq 22
found-> vendor=0x1000, dev=0x000b, revid=0x06
bus=2, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003000, size 8, enabled
pcib2: (null) requested I/O range 0x3000-0x30ff: in range
map[14]: type 1, range 64, base fa11c000, size 10, enabled
pcib2: (null) requested memory range 0xfa11c000-0xfa11c3ff: good
map[1c]: type 1, range 64, base fa118000, size 13, enabled
pcib2: (null) requested memory range 0xfa118000-0xfa119fff: good
pcib2: slot 5 INTA routed to irq 23
found-> vendor=0x1000, dev=0x000b, revid=0x06
bus=2, slot=5, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003400, size 8, enabled
pcib2: (null) requested I/O range 0x3400-0x34ff: in range
map[14]: type 1, range 64, base fa11c400, size 10, enabled
pcib2: (null) requested memory range 0xfa11c400-0xfa11c7ff: good
map[1c]: type 1, range 64, base fa11a000, size 13, enabled
pcib2: (null) requested memory range 0xfa11a000-0xfa11bfff: good
pcib2: slot 5 INTB routed to irq 24
found-> vendor=0x9004, dev=0x8078, revid=0x02
bus=2, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=7
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00003800, size 8, enabled
pcib2: (null) requested I/O range 0x3800-0x38ff: in range
map[14]: type 1, range 32, base fa11d000, size 12, enabled
pcib2: (null) requested memory range 0xfa11d000-0xfa11dfff: good
pcib2: slot 7 INTA routed to irq 25
found-> vendor=0x103c, dev=0x10c1, revid=0xa0
bus=2, slot=8, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0142, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fa110000, size 15, enabled
pcib2: (null) requested memory range 0xfa110000-0xfa117fff: good
pci2: <network, ethernet> at device 2.0 (no driver attached)
sym0: <896> port 0x3000-0x30ff mem
0xfa11c000-0xfa11c3ff,0xfa118000-0xfa119fff irq 23 at device 5.0 on pci2
sym0: Reserved 0x400 bytes for rid 0x14 type 3 at 0xfa11c000
sym0: Reserved 0x2000 bytes for rid 0x1c type 3 at 0xfa118000
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/a0/01/00/24
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym0: Delay (GEN=11): 258 msec, 34450 KHz
sym0: Delay (GEN=11): 281 msec, 31631 KHz
sym0: Delay (GEN=11): 281 msec, 31631 KHz
ioapic1: routing intpin 7 (PCI IRQ 23) to vector 51
sym0: [GIANT-LOCKED]
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
sym1: <896> port 0x3400-0x34ff mem
0xfa11c400-0xfa11c7ff,0xfa11a000-0xfa11bfff irq 24 at device 5.1 on pci2
sym1: Reserved 0x400 bytes for rid 0x14 type 3 at 0xfa11c400
sym1: Reserved 0x2000 bytes for rid 0x1c type 3 at 0xfa11a000
sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/a0/01/00/24
sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym1: Delay (GEN=11): 258 msec, 34450 KHz
sym1: Delay (GEN=11): 281 msec, 31631 KHz
sym1: Delay (GEN=11): 281 msec, 31631 KHz
ioapic1: routing intpin 8 (PCI IRQ 24) to vector 52
sym1: [GIANT-LOCKED]
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x3800-0x38ff mem
0xfa11d000-0xfa11dfff irq 25 at device 7.0 on pci2
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3800
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 441 instructions downloaded
ahc0: Features 0x10005, Bugs 0x11, Flags 0x28485540
ioapic1: routing intpin 9 (PCI IRQ 25) to vector 53
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci2: <base peripheral> at device 8.0 (no driver attached)
pci1: <memory> at device 3.1 (no driver attached)
pcib3: <PCI-PCI bridge> at device 4.0 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3
amr0: <LSILogic MegaRAID 1.53> mem 0xfa400000-0xfa7fffff irq 21 at
device 4.1 on pci1
amr0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xfa400000
ioapic1: routing intpin 5 (PCI IRQ 21) to vector 54
amr0: [MPSAFE]
amr0: <HP NetRaid 3si> Firmware C.02.08, BIOS B.02.04, 16MB RAM
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 18 devices, largest 184 bytes
PNP0c02: adding fixed memory32 range 0xfec00000-0xfecfffff, size=0x100000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfeffffff, size=0x200000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x27ffffff, size=0x27f00000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0xe8-0xe9, size=0x2, align=0x1
PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1
PNP0c02: adding io range 0xc0b-0xc0b, size=0x1, align=0x1
PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1
PNP0c02: adding io range 0xc20-0xc27, size=0x8, align=0x1
PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1
PNP0c02: adding io range 0xc50-0xc52, size=0x3, align=0x1
PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1
PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1
PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1
PNP0c02: adding io range 0xf50-0xf58, size=0x9, align=0x1
PNP0c02: adding io range 0x1100-0x111f, size=0x20, align=0x1
pnpbios: handle 2 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1200-0x123f, size=0x40, align=0x1
PNP0c02: adding io range 0x1040-0x104f, size=0x10, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xcb800-0xcbfff, size=0x800
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 16 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x20
PNP0401: adding dma mask 0x2
pnpbios: handle 21 device ID PNP0401 (0104d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff,0xc9800-0xcb7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 02 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x4021 0x4031 0x4021 0x4021
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
sio1: irq maps: 0x4021 0x4029 0x4021 0x4021
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 60
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem
0-0x9ffff,0xe0000-0xfffff,0x100000-0x27ffffff on isa0
unknown: <PNP0100> can't assign resources (irq)
unknown: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0x1200-0x123f,0x1040-0x104f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
Device configuration finished.
procfs registered
linprocfs registered
linsysfs registered
lapic: Divisor 2, Frequency 65757800 hz
Timecounter "TSC" frequency 986375221 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ROSB4 chip
acd0: <HITACHI CDR-8435/0010> CDROM drive at ata0 as master
acd0: read 5512KB/s (5512KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 69462MB (142258176 sectors) RAID 0 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 208386MB (426774528 sectors) RAID 0 (optimal)
GEOM: new disk amrd0
GEOM: new disk amrd1
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 1
ioapic0: Assigning ISA IRQ 1 to local APIC 1
INTR: Assigning IRQ 3 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 0
INTR: Assigning IRQ 7 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 1
INTR: Assigning IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 0
INTR: Assigning IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 1
INTR: Assigning IRQ 15 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic1: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 21 to local APIC 0
ioapic1: Assigning PCI IRQ 21 to local APIC 0
INTR: Assigning IRQ 23 to local APIC 1
ioapic1: Assigning PCI IRQ 23 to local APIC 1
INTR: Assigning IRQ 24 to local APIC 0
ioapic1: Assigning PCI IRQ 24 to local APIC 0
INTR: Assigning IRQ 25 to local APIC 1
ioapic1: Assigning PCI IRQ 25 to local APIC 1
Trying to mount root from ufs:/dev/amrd0s1a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/amrd0s1b as swap device
Starting file system checks:
/dev/amrd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1a: clean, 208850 free (3258 frags, 25699 blocks, 1.3%
fragmentation)
/dev/amrd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd1s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1e: clean, 253206 free (30 frags, 31647 blocks, 0.0%
fragmentation)
/dev/amrd1s1d: clean, 102599597 free (21 frags, 12824947 blocks, 0.0%
fragmentation)
/dev/amrd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1f: clean, 19967342 free (662550 frags, 2413099 blocks, 2.0%
fragmentation)
/dev/amrd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1d: clean, 783784 free (664 frags, 97890 blocks, 0.1%
fragmentation)
Mounting local file systems:.
Setting hostname: freebsd.
net.inet6.ip6.auto_linklocal: 1 -> 0
fxp0: link state changed to UP
DHCPREQUEST on fxp0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.254
bound to 192.168.1.64 -- renewal in 43200 seconds.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 192.168.1.64 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:30:6e:00:a8:a9
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Additional routing options:.
Starting devd.
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib
/usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib
/usr/local/lib/compat/pkg /usr/local/lib/graphviz
/usr/local/lib/mplayer/vidix /usr/local/lib/mysql /usr/local/lib/pth
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files:.
Starting syslogd.
Initial i386 initialization:.
Additional ABI support:.
Starting cupsd.
Feb 15 22:46:27 freebsd cupsd: gethostby*.getanswer: asked for
"freebsd.gateway.2wire.net IN AAAA", got type "A"
Removing stale Samba tdb files: done
Starting dbus.
Starting polkitd.
Starting hald.
Starting avahi-daemon.
Starting avahi-dnsconfd.
Starting local daemons:.
Updating motd.
Mounting late file systems:.
Configuring syscons: blanktime.
Starting sshd.
Starting cron.
Local package initialization: rtc.
Additional TCP options:.
Starting background file system checks in 60 seconds.
Thu Feb 15 22:46:32 PST 2007
FreeBSD/i386 (freebsd) (ttyd0)
login:
ASL is available at http://nix.synchro.net/hp-lh3000r.asl
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45D559E9.9060806>