Date: Wed, 06 Jun 2007 11:26:44 +0200 From: Mikael Batard <support@wanagain.net> To: freebsd-isdn@freebsd.org Subject: Re: Digium b410p with i4b Message-ID: <46667DD4.3010609@wanagain.net> In-Reply-To: <200706060916.48120.hselasky@c2i.net> References: <4665CAFA.3080801@wanagain.net> <200706060916.48120.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06.06.2007 09:16, Hans Petter Selasky wrote : > Thanks for the ID, I've added it to the SVN repo. Maybe you want to do a "svn > revert trunk/i4b/src/sys/i4b/layer1/ihfc2/i4b_hfc4s8s.h" then "svn update". Thanks. Done ! :) > This entry should be under "double_clock" = 0. OK, why ? > First you must ensure that you have set the correct protocol > using "isdnconfig". For example: > > isdnconfig -u 8 -p DRVR_DSS1_TE Yes I've already done that. > Then according to "man isdnconfig" it is also required to set "pcm_master" > mode before the card will operate. That is printed out in the "dmesg". This > is to avoid problems when you connect your HFC-4S to another clock source. > > From "man isdnconfig": > > isdnconfig -m 0 pcm_64 \ > -m 1 pcm_64 \ > -u 8 pcm_64 pcm_map 0 1 end pcm_master te_mode \ > -p DRVR_DSS1_TE \ > -u 9 pcm_64 pcm_map 0 1 end pcm_master nt_mode \ > power_on -p DRVR_DSS1_NT Already done too :) >> Asterisk 1.2.17, zaptel 1.4.1, libpri 1.4.0 and libpri-bristuff 1.2.3 >> are installed. >> There are 2 other cards installed : 1 Digium TDM400p (with 2 FXO ports) >> and 1 Passive ISDN BRI card (which works perfectly except for echo >> cancellation). > > You need to use "chan_capi" from the SVN repo, and not "zaptel", to get the > ISDN cards detected under Asterisk. Also I4B has a new Fast Fourier Transform > Based Acoustic Echo Canceller. Did you try that? Didn't try yet, how does it work ? In fact I'm already using chan_capi from svn repo with capi.conf. Zaptel is only used for the TDM400p card (2 FXO). My capi.conf (ISDN1 = Passive ISDN BRI, ISDN2 = Digium B410P): [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 alaw=yes [ISDN1] isdnmode=msn incomingmsn=* controller=0 group=1 softdtmf=1 relaxdtmf=on accountcode= context=capi-in holdtype=local echocancel=yes echosquelch=no devices=2 dtmf_generate=yes [ISDN2] isdnmode=MSN incomingmsn=* controller=8 group=1 softdtmf=0 relaxdtmf=off accountcode= context=capi-in holdtype=local echocancel=yes echosquelch=no devices=2 Regards, -- Mikael Batard Wan Again 12 Route de l'Isle 84510 Caumont sur Durance Tel: +33 (0)4 90 01 26 86 Fax: +33 (0)4 90 23 58 05 http://www.wanagain.fr/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46667DD4.3010609>