Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 Sep 2007 15:15:10 -0700
From:      Predrag Punosevac <punosevac@math.arizona.edu>
To:        cjclark@alum.mit.edu,  questions@freebsd.org
Subject:   Re: CDRW Stopped Working Moving to 6.x
Message-ID:  <46E9B66E.9090508@math.arizona.edu>
In-Reply-To: <20070913212001.GD3754@goku.pumpky.net>
References:  <20070913182916.GC3754@goku.pumpky.net>	<46E99BB5.3060808@math.arizona.edu> <20070913212001.GD3754@goku.pumpky.net>

next in thread | previous in thread | raw e-mail | index | archive | help
I know where is your problem the burning device is always cd0

you must give the device node /dev/cd0

Take care!

         


Crist J. Clark wrote:
> On Thu, Sep 13, 2007 at 01:21:09PM -0700, Predrag Punosevac wrote:
>   
>> Make sure you add atapicam into your kernel it is not in generic! I had 
>> the same problem.
>>
>> /etc/loader.conf   atapicam_load="YES"
>>     
>
> I did a,
>
> 	# kldload /boot/kernel/atapicam.ko
>
> And to reinitiallize the drive,
>
> 	# atacontrol detach ata1
> 	# atacontrol attach ata1
>
> I got the same console message,
>
>   acd0: detached
>   (cd0:ata1:0:0:0): lost device
>   (cd0:ata1:0:0:0): removing device entry
>   atapicam1: detached
>   stray irq15
>   acd0: CDROM <CRD-8400B/1.06> at ata1-master UDMA33
>
> And still get,
>
> 	# burncd -f /dev/acd0 -t -s 32 data ~cjc/hw.iso fixate
> 	burncd: ioctl(CDIOCSTART): Input/output error
>
>   
>> Crist J. Clark wrote:
>>     
>>> I just tried to burn a CD for the first time in a long time
>>> on a machine. The burncd(8) command worked fine on this machine
>>> in FreeBSD 5.x (or was it 4.x?), but now in 6.2, I get,
>>>
>>>  # burncd -f /dev/acd0 -s 32 data hw.iso fixate
>>>  burncd: ioctl(CDIOCSTART): Input/output error
>>>
>>> Looking at the dmesg(1) from the last boot,
>>>
>>>  # fgrep cd0 /var/run/dmesg.boot
>>>  acd0: CDROM <CRD-8400B/1.06> at ata1-master UDMA33
>>>
>>> Makes me think the system is not recognizing the device as CDRW,
>>> only CDROM. I get this from atacontrol(8),
>>>
>>>  # atacontrol info ata1
>>>  Master: acd0 <CRD-8400B/1.06> ATA/ATAPI revision 0
>>>  Slave:       no device present
>>>  # atacontrol cap acd0
>>>
>>>  Protocol              ATA/ATAPI revision 0
>>>  device model          CRD-8400B
>>>  serial number         1999/10/12
>>>  firmware revision     1.06
>>>  cylinders             0
>>>  heads                 0
>>>  sectors/track         0
>>>  lba supported         
>>>  lba48 not supported       
>>>  dma supported
>>>  overlap not supported
>>>
>>>  Feature                      Support  Enable    Value           Vendor
>>>  write cache                    no       no
>>>  read ahead                     no       no
>>>  Tagged Command Queuing (TCQ)   no       no      0/0x00
>>>  SMART                          no       no
>>>  microcode download             no       no
>>>  security                       no       no
>>>  power management               no       no
>>>  advanced power management      no       no      0/0x00
>>>  automatic acoustic management  no       no      0/0x00  0/0x00
>>>
>>> How can I restore burning capability?
>>>  
>>>       
>
>   




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46E9B66E.9090508>