Date: Mon, 15 Oct 2007 13:32:33 +0200 From: Pietro Cerutti <gahr@gahr.ch> To: leegold <leegold@fastmail.fm>, freebsd-questions@freebsd.org Subject: Re: Audio CD help Message-ID: <47134FD1.6050809@gahr.ch> In-Reply-To: <1192444612.31601.1215903023@webmail.messagingengine.com> References: <1192444612.31601.1215903023@webmail.messagingengine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
leegold wrote: > Hi, Hi, > > This is probably going to basic stuff, sorry to bother. > > I can not get Audio Cds to play. I'm using KDE. Please elaborate this sentence. What did you try? What error messages did you get? > > During sysinstall FreeBSD accesses CDs OK. > > It's acd0 and is a DVD-RW. For now I just want to play Audio CDs. > > Is the problem it's not mounted? He's my info: No, you cannot mount audio cds. > > $ mount > /dev/ad2s1a on / (ufs, local) > devfs on /dev (devfs, local) > /dev/ad2s1g on /home (ufs, local, soft-updates) > /dev/ad2s1e on /tmp (ufs, local, soft-updates) > /dev/ad2s1f on /usr (ufs, local, soft-updates) > /dev/ad2s1d on /var (ufs, local, soft-updates) Try with: $ cdcontrol play > $ > > $ /sbin/dmesg > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 > root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2613.41-MHz > 686-class CPU) > Origin = "AuthenticAMD" Id = 0x40f32 Stepping = 2 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> > AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> > Cores per package: 2 > real memory = 2147418112 (2047 MB) > avail memory = 2087878656 (1991 MB) > ACPI APIC Table: <GBT NVDAACPI> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 2 > ioapic0 <Version 1.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, > RF5413) > acpi0: <GBT NVDAACPI> on motherboard > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: Power Button (fixed) > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: reservation of 290, 5 (4) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 1.1 (no driver attached) > ohci0: <OHCI (generic) USB controller> mem 0xf3102000-0xf3102fff irq 21 > at device 2.0 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq > 22 at device 2.1 on pci0 > ehci0: [GIANT-LOCKED] > usb1: EHCI version 1.0 > usb1: companion controller, 4 ports each: usb0 > usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > pcm0: <nVidia nForce4> port 0xb400-0xb4ff,0xb800-0xb8ff mem > 0xf3104000-0xf3104fff irq 23 at device 4.0 on pci0 > pcm0: <Avance Logic ALC850 AC97 Codec> > atapci0: <nVidia nForce CK804 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > atapci1: <nVidia nForce CK804 SATA300 controller> port > 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xcc00-0xcc0f mem > 0xf3100000-0xf3100fff irq 21 at device 7.0 on pci0 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > atapci2: <nVidia nForce CK804 SATA300 controller> port > 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xe000-0xe00f mem > 0xf3101000-0xf3101fff irq 22 at device 8.0 on pci0 > ata4: <ATA channel 0> on atapci2 > ata5: <ATA channel 1> on atapci2 > pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem > 0xf3005000-0xf30050ff irq 19 at device 7.0 on pci1 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:00:e8:9d:02:aa > fwohci0: <Texas Instruments TSB43AB23> mem > 0xf3004000-0xf30047ff,0xf3000000-0xf3003fff irq 18 at device 10.0 on > pci1 > fwohci0: OHCI version 1.10 (ROM=1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:1a:4d:00:00:c1:d1:30 > fwohci0: Phy 1394a available S400, 3 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: foobar:^) > fwe0: Ethernet address: foobar:^) > fwe0: if_start running deferred for Giant > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > nvidia0: <GeForce 7900 GS> port 0xa000-0xa07f mem > 0xf0000000-0xf0ffffff,0xe0000000-0xefffffff,0xf1000000-0xf1ffffff irq 18 > at device 0.0 on pci5 > nvidia0: [GIANT-LOCKED] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xd0000-0xd3fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > umass0: TEAC TEAC FD-05PUW, rev 2.00/0.00, addr 2 > Timecounters tick every 1.000 msec > acd0: DMA limited to UDMA33, device found non-ATA66 cable > acd0: DVDR <LITE-ON DVDRW SHW-1635S/YS0R> at ata0-master UDMA33 > ad2: 78166MB <Maxtor 6Y080P0 YAR41BW0> at ata1-master UDMA133 > ad4: 238474MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA300 > SMP: AP CPU #1 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <TEAC FD-05PUW 3000> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > Trying to mount root from ufs:/dev/ad2s1a > $ > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Pietro Cerutti PGP Public Key: http://gahr.ch/pgp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47134FD1.6050809>