Date: Sun, 28 Oct 2007 13:59:00 -0300 From: Andrew Birukov <amb@amb.kiev.ua> To: current@freebsd.org Subject: pf broken in 7.0-BETA1 ? Message-ID: <4724BFD4.2040406@amb.kiev.ua>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------090005000506050008010101
Content-Type: text/plain; charset=KOI8-R; format=flowed
Content-Transfer-Encoding: 7bit
pf.conf:
---------------------------------------------------------------
ext_if="xl0"
altq on $ext_if priq bandwidth 520Kb queue { ssh, traf }
queue ssh priority 1
queue traf priority 15 priq(default)
pass in all
pass out all
pass out on $ext_if proto tcp from any to any tos 0x10 queue ssh
-----------------------------------------------------------------
I connected to remote host by ssh.
In tcpdump i see many packets witch tos 0x10.
12:54:46.732928 IP (tos 0x10, ttl 64, id 12486, offset 0, flags [DF],
proto TCP (6), length 52) 10.15.25.2.56587 > 194.0.91.110.22: ., cksum
0x35d5 (correct), 1919:1919(0) ack 2832 win 8181 <nop,nop,timestamp
8630585 535444648>
12:54:46.746958 IP (tos 0x10, ttl 64, id 12487, offset 0, flags [DF],
proto TCP (6), length 100) 10.15.25.2.56587 > 194.0.91.110.22: P
1919:1967(48) ack 2832 win 8195 <nop,nop,timestamp 8630598 535444648>
12:54:46.900186 IP (tos 0x10, ttl 64, id 12488, offset 0, flags [DF],
proto TCP (6), length 52) 10.15.25.2.56587 > 194.0.91.110.22: ., cksum
0x33ec (correct), 1967:1967(0) ack 2944 win 8181 <nop,nop,timestamp
8630746 535444816>
12:54:46.915079 IP (tos 0x10, ttl 64, id 12489, offset 0, flags [DF],
proto TCP (6), length 100) 10.15.25.2.56587 > 194.0.91.110.22: P
1967:2015(48) ack 2944 win 8195 <nop,nop,timestamp 8630760 535444816>
tcpdump confirms that the outgoing ssh data packets have tos 0x10, but
the majority of the packets are still going to the default "traf" queue.
queue ssh on xl0
[ pkts: 0 bytes: 0 dropped pkts: 0 bytes:
0 ]
[ qlength: 0/ 50 ]
[ measured: 0.0 packets/s, 0 b/s ]
queue traf on xl0 priority 15 priq( default )
[ pkts: 5059 bytes: 1130390 dropped pkts: 69 bytes:
80689 ]
[ qlength: 0/ 50 ]
[ measured: 3.9 packets/s, 2.15Kb/s ]
This problem is affected 7.0 only.
pf rools witch tos in FreeBSD-6.2 work properly.
My configuration:
# uname -a
FreeBSD amb.kiev.ua 7.0-BETA1 FreeBSD 7.0-BETA1 #1: Sun Oct 28 10:08:13
ADT 2007 root@amb.kiev.ua:/usr/obj/usr/src/sys/AMB.7.0 i386
dmesg output and kernel config file are attached to this letter.
If you need any additional info, please ask.
Should I open an PR ?
--
Andrew Biriukov
amb@amb.kiev.ua
--------------090005000506050008010101
Content-Type: text/plain;
name="KERNEL"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="KERNEL"
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.1 2007/10/11 06:20:26 kensmith Exp $
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident AMB
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_4BSD # 4BSD scheduler
#options SCHED_ULE
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
#options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
#options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
#options IPFIREWALL
#options IPFIREWALL_DEFAULT_TO_ACCEPT
#options IPFIREWALL_FORWARD
#options DUMMYNET
#options IPFILTER
#options IPFILTER_LOG
#options ACCEPT_FILTER_DATA
#options ACCEPT_FILTER_HTTP
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_CDNR
options ALTQ_PRIQ
options ALTQ_NOPCC
options ALTQ_DEBUG
#options NETGRAPH
#options NETGRAPH_SPPP
#options NETGRAPH_PPP
#options NETGRAPH_PPPOE
#options NETGRAPH_PPTPGRE
options DEVICE_POLLING
device atapicam
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
#device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device rr232x # Highpoint RocketRAID 232x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
#device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # AMRR transmit rate control algorithm
#device wlan_scan_ap # 802.11 AP mode scanning
#device wlan_scan_sta # 802.11 STA mode scanning
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device ath # Atheros pci/cardbus NIC's
#device ath_hal # Atheros HAL (Hardware Access Layer)
#device ath_rate_sample # SampleRate tx rate control for ath
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
#device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
#device rum # Ralink Technology RT2501USB wireless NICs
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
device sound
device snd_hda
device coretemp
--------------090005000506050008010101
Content-Type: text/plain;
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA1 #1: Sun Oct 28 10:08:13 ADT 2007
root@amb.kiev.ua:/usr/obj/usr/src/sys/AMB.7.0
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1805.49-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147024896 (2047 MB)
avail memory = 2087424000 (1990 MB)
ACPI APIC Table: <MSTEST OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <MSTEST OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7100 GS> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:18:f3:74:54:de
re0: [FILTER]
re0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xfeaffc00-0xfeaffc7f irq 23 at device 2.0 on pci5
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:03:ba:e0:71
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: port not implemented
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: port not implemented
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci1
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci1
ata10: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xd2000-0xd27ff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub7: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on uhub4
uhub7: 4 ports with 4 removable, self powered
ukbd0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 3> on uhub7
kbd2 at ukbd0
uhid0: <Microsft Microsoft Wireless Desktop Receiver 3.1, class 0/0, rev 2.00/0.02, addr 3> on uhub7
ums0: <Microsoft Microsoft Wireless Optical Mouse\M-. 1.00, class 0/0, rev 2.00/0.07, addr 4> on uhub7
ums0: 5 buttons and Z dir and a TILT dir.
uhid1: <No brand SP02-A1, class 0/0, rev 1.10/1.00, addr 5> on uhub7
uhid2: <No brand SP02-A1, class 0/0, rev 1.10/1.00, addr 5> on uhub7
uhid2: unexpected endpoint
device_attach: uhid2 attach returned 6
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-H10N/JL12> at ata4-slave UDMA33
ad10: 305245MB <Seagate ST3320620AS 3.AAK> at ata5-master SATA300
ad12: 381554MB <Seagate ST3400832AS 3.06> at ata6-master SATA150
pcm0: <HDA Codec: Analog Devices AD1988>
pcm0: <HDA Driver Revision: 20071020_0048>
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
SMP: AP CPU #1 Launched!
cd0 at ata4 bus 0 target 1 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H10N JL12> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad10s1a
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
re0: link state changed to UP
altq: emulate 256000000Hz cpu clock
xl0: promiscuous mode enabled
xl0: promiscuous mode disabled
xl0: promiscuous mode enabled
xl0: promiscuous mode disabled
xl0: promiscuous mode enabled
xl0: promiscuous mode disabled
xl0: promiscuous mode enabled
xl0: promiscuous mode disabled
--------------090005000506050008010101--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4724BFD4.2040406>