Date: Sat, 26 Jan 2008 20:33:14 -0500 From: Chuck Swiger <cswiger@mac.com> To: "Alphons \"Fonz\" van Werven" <a.j.werven@student.utwente.nl> Cc: Ghirai <ghirai@ghirai.com>, freebsd-questions@freebsd.org Subject: Re: [FreeBSD] 6.3-R diskhandling Message-ID: <479BDF5A.5090506@mac.com> In-Reply-To: <479B4A75.4040001@student.utwente.nl> References: <479B3BCE.3050808@student.utwente.nl> <20080126163443.dcdf9202.ghirai@ghirai.com> <479B4A75.4040001@student.utwente.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Alphons "Fonz" van Werven wrote: > Ghirai wrote: >> This article might help: >> http://www.clearchain.com/wiki/FreeBSD_%26_Windows_Vista > > Okay, thanks for the link. I was not aware of that. > > However, I do think there's more to it than that. After all, Slackware was > able to install LILO without any problems whatsoever. Both Vista and Linux > would boot just fine. This has been informative-- perhaps someone ought to file a PR about having the installer try to preserve this UID in the MBR...? ----- [ cue link to somewhat related thread "Re: "ad0: TIMEOUT - WRITE_DMA" type errors with 7.0-RC1" ...in the freebsd-stable mailing list... ] Gah. :-) I'm facing a similar situation coming up, as one of my machines has a: > Model Family: Maxtor MaXLine Plus II > Device Model: Maxtor 7Y250M0 > Serial Number: Y65V3WKE > Firmware Version: YAR51HW0 > User Capacity: 251,000,193,024 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 7 > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 > Local Time is: Sat Jan 26 19:50:00 2008 EST > SMART support is: Available - device has SMART capability. > Enabled status cached by OS, trying SMART RETURN STATUS cmd. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x80) Offline data collection activity > was never started. > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 118) The previous self-test completed having > the read element of the test failed. [ after a long self-test: ^^^ bad ^^^ ] > Total time to complete Offline > data collection: ( 363) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off supp > ort. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > No General Purpose Logging support. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 107) minutes. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE > 3 Spin_Up_Time 0x0027 180 180 063 Pre-fail Always - 24027 > 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 430 > 5 Reallocated_Sector_Ct 0x0033 217 217 063 Pre-fail Always - 373 > 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 > 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 > 8 Seek_Time_Performance 0x0027 249 244 187 Pre-fail Always - 46905 > 9 Power_On_Minutes 0x0032 240 240 000 Old_age Always - 362h+29m > 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 > 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 > 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 253 > 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 > 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 > 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 36 > 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2950 > 196 Reallocated_Event_Count 0x0008 252 252 000 Old_age Offline - 1 > 197 Current_Pending_Sector 0x0008 217 217 000 Old_age Offline - 364 > 198 Offline_Uncorrectable 0x0008 252 252 000 Old_age Offline - 1 > 199 UDMA_CRC_Error_Count 0x0008 199 198 000 Old_age Offline - 1 > 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 > 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 8 > 202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0 > 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 1 > 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0 > 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 > 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 > 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 > 209 Offline_Seek_Performnce 0x0024 194 194 000 Old_age Offline - 0 > 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 > 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 > 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 ...which I have backed up to both an external Firewire drive, and have set up a copy of this 250MB Maxtor onto a pair of WDC WD3200AAKS (320GB SATA2) drives in a nV RAID-1 mirror on an MSI-7220 (K8N) motherboard. A clone of the FreeBSD 6.2 [32-bit] system worked fine modulo changing the disk device names in /etc/fstab, using the stock FreeBSD bootloader. [ It's since been upgraded to RELENG_7 via 7.0RC1-amd64... ] The Windows XP-Pro(SP2) clone of the disk boots far enough to display the blue sVGA graphics, but never presents a login prompt. It's not going to be a big pain to reinstall of the system if I have to, but I'd be happier getting the clone working than having to merge changes in from a failing drive. Regards, -- -Chuck
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?479BDF5A.5090506>