Date: Thu, 03 Apr 2008 16:41:41 -0600 From: Scott Long <scottl@samsco.org> To: Julien <jcigar@ulb.ac.be> Cc: freebsd-scsi@freebsd.org Subject: Re: (probe30:iir0:2:0:0): inquiry data fails comparison at DV1 step Message-ID: <47F55D25.9040900@samsco.org> In-Reply-To: <47F54966.9020500@samsco.org> References: <1207131421.2910.11.camel@frodon.be-bif.ulb.ac.be> <47F54966.9020500@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Scott Long wrote: > Julien wrote: >> Hello, >> >> I'm using FreeBSD 7.0 with an Intel SRCZCR >> (http://support.intel.com/support/motherboards/server/srczcr/) RAID >> controller. The machine is configured as the following: >> - RAID 1 + one spare disk where the system is installed >> - RAID 5 + one spare disk mounted under /usr >> >> The disks are from Seagate (146 GB, U320). >> It seems to work fine (it's a fresh install) except that I have this >> message on boot : >> >> (probe30:iir0:2:0:0): inquiry data fails comparison at DV1 step >> >> Should I worry or can I ignore this message ? What's the exact meaning >> of it ? >> The complete dmesg output can be found on >> http://rafb.net/p/4AWejC78.html >> >> In advance thanks, >> Julien >> >> ps: could you reply on my email address as I'm not subscribed on this >> ML. >> >> > > There's a mysterious problem here that looks like it's some sort > of use-after-free or data corruption. I've seen similar reports > but haven't been able to debug it. However, it seems to be harmless. > Oops, my apologies, so many drivers, so little brainpower. This problem may have been fixed back in January, but only in 8-CURRENT. I'll look into merging the fix into FreeBSD 7. Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47F55D25.9040900>