Date: Fri, 03 Oct 2008 13:09:57 +1000 From: Alex <mailinglist@ahhyes.net> To: freebsd-x11@freebsd.org Subject: Re: DRI not working Message-ID: <48E58D05.7010003@ahhyes.net> In-Reply-To: <1222965932.12046.14.camel@squirrel.corp.cox.com> References: <48E4CC06.1070802@ahhyes.net> <1222960850.12046.6.camel@squirrel.corp.cox.com> <48E4E95B.3020708@ahhyes.net> <1222965932.12046.14.camel@squirrel.corp.cox.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Robert Noland wrote:
> Ok, I found a RELENG_7 test box. It does apply and build cleanly.
>
> robert.
>
>
Hi Robert,
Thank you for the patch. The patch applied cleanly and I was able to
rebuild cleanly as well.
Unfortunately I am seeing the same symptoms as Szilveszter. DRM is no
longer attaching to both heads, which is good. So perhaps the remainder
of the issue is with the intel driver?
From dmesg:
==========
vgapci0: <VGA-compatible display> port 0xc000-0xc007 mem
0xf0000000-0xf7ffffff,0xfaf80000-0xfaffffff irq 11 at device 2.0 on pci0
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> on vgapci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
drm0: <Intel i852GM/i855GM GMCH> on vgapci0
info: [drm] AGP at 0xf0000000 128MB
info: [drm] Initialized i915 1.5.0 20060119
vgapci1: <VGA-compatible display> mem
0xe8000000-0xefffffff,0xfaf00000-0xfaf7ffff at device 2.1 on pci0
pci0: <serial bus, USB> at device 29.0 (no driver attached)
From Xorg logs:
============
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression
enabled
(**) intel(0): Tiling
enabled
(==) intel(0): Write-combining range (0xfaf80000,0x80000) was already
clear
(==) intel(0): VideoRam: 131072
KB
(II) intel(0): Attempting memory allocation with tiled
buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages
failed
(Cannot allocate
memory)
(WW) intel(0): xf86AllocateGARTMemory: allocation of 4 pages
failed
(Cannot allocate
memory)
(WW) intel(0): Disabling HW cursor because the cursor memory allocation
failed.
(II) intel(0): Tiled allocation
successful.
(--) intel(0): DRI is disabled because it needs HW cursor, 2D accel and
AGPGART.
Let us know if you discover anything else. I really appreciate your time
spent on this.
Thanks again!
Alex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48E58D05.7010003>