Date: Mon, 12 Jan 2009 18:21:27 +0100 From: Sascha Holzleiter <sascha@holzleiter.name> To: stable@freebsd.org Subject: Re: FreeBSD 7.1 Breaks re and rl Network Interface Drivers Message-ID: <496B7C17.8010107@holzleiter.name> In-Reply-To: <8dfae1c10901070639x67945324jeeecfcac647d7976@mail.gmail.com> References: <8dfae1c10901070639x67945324jeeecfcac647d7976@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------090909020301030402090203
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Walter Venable wrote:
> FreeBSD 7.1 upgrade broke my network access, machine is totally
> offline (powered-on and I can play inside it at the terminal, but
> absolutely 0 network access):
> This happened AFTER make kernel but BEFORE make installworld. I think
> this implies it's a kernel driver issue.
Hi,
i see similar problems with a re card:
re0@pci0:4:7:0: class=0x020000 card=0x816710ec chip=0x816710ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
class = network
subclass = ethernet
After upgrading to 7.1-RELEASE (and also STABLE) the NIC doesn't seem to
receive any frames. I can see the DHCP Requests on the DHCP Server but
the DHCPOFFERS are never seen by the client with the re0 device.
After setting promiscious mode on the interface (i.e. by tcpdump -ni
re0) the interface begins to work fine.
I've attached a complete dmesg output, but i think the detection works
fine, here the short version:
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port
0x9c00-0x9cff mem 0xdfdff000-0xdfdff0ff irq 20 at device 7.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:1a:92:35:29:fa
re0: [FILTER]
--------------090909020301030402090203
Content-Type: text/plain;
name="dmesg.nolink"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.nolink"
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-STABLE #0: Mon Jan 12 14:18:26 CET 2009
root@dreamland.office.local:/usr/obj/usr/src/sys/DREAMLAND
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz (1863.87-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2146304000 (2046 MB)
avail memory = 2086531072 (1989 MB)
ACPI APIC Table: <AWARD ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <AWARD ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 100000, 7fde0000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfe800000-0xfe8003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xdc000000-0xdcffffff,0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 24 at device 0.0 on pci2
nvidia0: <GeForce 7300 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port 0xcc00-0xcc07,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc0f mem 0xdfefe000-0xdfefffff irq 28 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
atapci1: <VIA 8237A SATA150 controller> port 0xfc00-0xfc07,0xf800-0xf803,0xf400-0xf407,0xf000-0xf003,0xec00-0xec0f,0xe800-0xe8ff irq 21 at device 15.0 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
atapci2: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe400-0xe40f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci2
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 20 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 22 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 23 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdffff000-0xdffff0ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0x9c00-0x9cff mem 0xdfdff000-0xdfdff0ff irq 20 at device 7.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1a:92:35:29:fa
re0: [FILTER]
pcib5: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib5
pci128: <multimedia, HDA> at device 1.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 72a072a0600072a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_hpet0: <High Precision Event Timer> iomem 0xfe800000-0xfe8003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd2fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <vendor 0x046d product 0x08dd, class 0/0, rev 1.10/1.00, addr 2> on uhub0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-H44N/RB00> at ata0-master UDMA66
ad10: 76319MB <Seagate ST380215AS 3.AAC> at ata5-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad10s1a
--------------090909020301030402090203--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?496B7C17.8010107>