Date: Mon, 23 Apr 2001 13:37:50 -0400 From: Christian Plazas <Cplazas@deltadatasoft.com> To: "'freebsd-mobile@freebsd.org'" <freebsd-mobile@freebsd.org> Subject: problems configuring webgear aviator 2.4 Message-ID: <4978EE8F40AFD4118DD000010260D4307B4A@mail.deltadatasoft.com>
next in thread | raw e-mail | index | archive | help
Hi all,
I'm trying to get my webgear aviator 2.4 wireless lan card to work.
I am running 4.3-RELEASE on a computer that is not a laptop, but has
an isa pcmcia adapter that came with the aviator card installed.
The error message that I see on boot is:
Apr 23 10:51:56 firstupc pccardd[93]: driver allocation failed for
WebGear(PC Ca
rd WLAN Adapter): Device not configured
Also, I'm new to this pcmcia on freebsd stuff so it could be something I
don't have
set right.
I am including the output from dmesg.out, pccardc dumpcis, rdreg and rdmap.
Thanks in advance,
C.P.
firstupc# dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (314.61-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134217728 (131072K bytes)
avail memory = 126291968 (123332K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <SiS 5591 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
atapci0: <SiS 5591 ATA33 controller> port
0x4000-0x400f,0x7830404-0x7830407,0x40
c7c260-0x40c7c267,0x301c524-0x301c527,0x92298220-0x92298227 irq 0 at device
0.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1039, dev=0x0009) at 1.1
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS 6326 SVGA controller> at 0.0
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
0xffafff00-0xffafffff ir
q 10 at device 10.0 on pci0
rl0: Ethernet address: 00:48:54:60:b9:86
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdf80-0xdf9f irq 9 at device
11.
0 on pci0
ed0: address 00:c0:f0:5b:c0:7d, type NE2000 (16 bit)
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 6149MB <QUANTUM FIREBALL EX6.4A> [13328/15/63] at ata0-master UDMA33
ad1: 2014MB <WDC AC22100H> [4092/16/63] at ata0-slave WDMA2
acd0: CDROM <GCD-R560B> at ata1-master using PIO3
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled
firstupc# pccardc dumpcis 0
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 4
000: 6f 23 2a ff
Common memory device information:
Device number 1, type SRAM, WPS = ON
Speed = 1.5 x 1 us, Memory block size = reserved, 32 units
Device number 2, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 6f 23 09 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = ON
Speed = 1.5 x 1 us, Memory block size = reserved, 32 units
Device number 2, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #3, code = 0x15 (Version 1 info), length = 54
000: 04 01 57 65 62 47 65 61 72 00 50 43 20 43 61 72
010: 64 20 57 4c 41 4e 20 41 64 61 70 74 65 72 00 56
020: 65 72 73 69 6f 6e 20 34 2e 38 38 20 4a 61 6e 20
030: 31 39 39 39 00 ff
Version = 4.1, Manuf = [WebGear], card vers = [PC Card WLAN Adapter]
Addit. info = [Version 4.88 Jan 1999]
Tuple #4, code = 0x1a (Configuration map), length = 5
000: 01 01 00 0f 0b
Reg len = 2, config register addr = 0xf00, last config = 0x1
Registers: XX-X----
Tuple #5, code = 0x1b (Configuration entry), length = 17
000: c1 81 71 77 55 c5 4b d5 19 3e 56 06 30 b8 ff 08
010: c0
Config index = 0x1(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4 x 1V, ext = 0x4b
Maximum operating supply voltage: 5 x 1V, ext = 0x19
Max current average over 1 second: 3.5 x 100mA
Max current average over 10 ms: 5 x 100mA
Power down supply current: 1 x 100mA
IRQ modes: Level
IRQs: 3 4 5 7 8 9 10 11 12 13 14 15
Memory descriptor 1
blk length = 0xc000
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #10, code = 0x20 (Manufacturer ID), length = 4
000: a6 01 00 00
PCMCIA ID = 0x1a6, OEM ID = 0x0
Tuple #11, code = 0x14 (No link), length = 0
Tuple #12, code = 0x13 (Link target), length = 3
000: 43 49 53
Tuple #13, code = 0xff (Terminator), length = 0
1 slots found
firstupc# pccardc rdreg 0
Registers for slot 0
00: 83 ef d0 60 00 0f 21 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 32 00 00 00 00 00
firstupc# pccardc rdmap 0
Mem 0: flags 0x041 host 0xd4000 card 4000 size 49152 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x 0 size 0 bytes
I/O 1: flags 0x000 port 0x 0 size 0 bytes
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4978EE8F40AFD4118DD000010260D4307B4A>