Date: Sat, 27 Jun 2009 12:37:22 +0100 From: Daniel Leal <dfpleal@gmail.com> To: freebsd-questions@freebsd.org Subject: cant burn a cd iso Message-ID: <4A460472.5000803@gmail.com>
next in thread | raw e-mail | index | archive | help
Hi !
I am trying to burn a iso in my laptop with freebsd 7.2
Installed cdrtools and then kldload atapicam.
Then I looked for the cdrom:
#cdrecord -scanbus
Cdrecord-Clone 2.01 (i386-unknown-freebsd7.2) Copyright (C) 1995-2004
J?rg Schilling
Using libscg version 'schily-0.8'.
scsibus2:
2,0,0 200) 'PIONEER ' 'DVD-RW DVR-K17A' '1.51' Removable CD-ROM
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *
So I try to burn the iso with the comand:
# cdrecord -v dev=2,0,0 myfile.iso
It seams to start correctly, but in the midle gave me the input/output
error:
Can someone help me please?
Thanks
Here is all what I could get from the -v option:cdrecord: No write mode
specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i386-unknown-freebsd7.2) Copyright (C) 1995-2004
Jrg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-K17A'
Revision : '1.51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0012
Profile: 0x0002
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 616 MB Total size: 708 MB (70:12.05) =
315904 sectors
Lout start: 708 MB (70:14/04) = 315904 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11834 (97:24/16)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 24
Manufacturer: SONY Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 43945
Starting to write CD/DVD at speed 24 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 499 of 616 MB written (fifo 100%) [buf 79%]
20.6x.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 03 E6 A9 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 56 42 66 0E 00 00 00 00 0C 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 5653094 (not valid)
cmd finished after 0.001s timeout 40s
write track data: error after 523585536 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing time: 287.920s
Average write speed 15.0x.
Min drive buffer fill was 42%
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd:
retryable error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 72 03 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
session) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.353s timeout 480s
cmd finished after 1.353s timeout 480s
cdrecord: Cannot fixate disk.
Fixating time: 1.467s
cdrecord: fifo had 8311 puts and 8248 gets.
cdrecord: fifo was 0 times empty and 2899 times full, min fill was 85%.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A460472.5000803>