Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 07 Dec 2009 13:40:14 +0000
From:      Michael Fuckner <michael@fuckner.net>
To:        freebsd-amd64@FreeBSD.org, freebsd-amd64@mlists.thewrittenword.com
Subject:   Re: Success with Supermicro H8DIi+-F motherboard?
Message-ID:  <4B1D05BE.8020905@fuckner.net>
In-Reply-To: <20091205180607.GA9412@songoku.il.thewrittenword.com>
References:  <20091204183122.GA20479@honinbu.il.thewrittenword.com>	<4B1A24E6.8040608@fuckner.net> <20091205180607.GA9412@songoku.il.thewrittenword.com>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------000405010800080506050105
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Albert Chin wrote:

>> I am not exactly sure if this Version is on the 8.0-RELEASE-CD, but
>> I'll  boot this CD on Monday.
> 
> Can you try booting the 7.2-RELEASE-CD as well?
> 
done :)

Regards,
  Michael!

--------------000405010800080506050105
Content-Type: text/plain;
 name="dmesg-h8dii-7.2.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg-h8dii-7.2.txt"

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 07:18:07 UTC 2009
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Quad-Core AMD Opteron(tm) Processor 2378 (2400.02-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f42  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,<b23>>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>,<b12>,<b13>>
  TSC: P-state invariant
  Cores per package: 4
usable memory = 17166204928 (16370 MB)
avail memory  = 16623378432 (15853 MB)
ACPI APIC Table: <112609 APIC0945>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.1 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xd800-0xd81f mem 0xfdee0000-0xfdefffff,0xfdedc000-0xfdedffff irq 17 at device 0.0 on pci4
em0: Using MSIX interrupts
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:30:48:bc:83:46
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xe800-0xe81f mem 0xfdfe0000-0xfdffffff,0xfdfdc000-0xfdfdffff irq 18 at device 0.0 on pci5
em1: Using MSIX interrupts
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 00:30:48:bc:83:47
atapci0: <ATI IXP700 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfddff800-0xfddffbff irq 22 at device 17.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfddfe000-0xfddfefff irq 16 at device 18.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfddfd000-0xfddfdfff irq 16 at device 18.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfddff000-0xfddff0ff irq 17 at device 18.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfddfc000-0xfddfcfff irq 18 at device 19.0 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfddfb000-0xfddfbfff irq 18 at device 19.1 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfddfa800-0xfddfa8ff irq 19 at device 19.2 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 6 ports with 6 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfebfc000-0xfebfffff,0xfe000000-0xfe7fffff irq 20 at device 4.0 on pci6
ohci4: <OHCI (generic) USB controller> mem 0xfddf9000-0xfddf9fff irq 18 at device 20.5 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb6: OHCI version 1.0, legacy support
usb6: <OHCI (generic) USB controller> on ohci4
usb6: USB revision 1.0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0-0x5,0x7 drq 2 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2: <16550A-compatible COM port> port 0x3e8-0x3ef irq 5 on acpi0
sio2: type 16550A
sio2: [FILTER]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
fdc0: <floppy drive controller (FDE)> port 0-0x5,0x7 drq 2 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <HL-DT-ST DVDRAM GH22NS50/TN01> at ata0-slave UDMA33
ad4: 476940MB <Seagate ST3500320NS SN06> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1a is ufsid/4b1ce0bec75abb36.
ad6: 476940MB <Seagate ST3500320NS SN06> at ata3-master SATA150
GEOM_LABEL: Label for provider ad4s1d is ufsid/4b1ce0ca5ab60085.
ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode
ar0: 476804MB <DDF RAID1> status: DEGRADED
ar0: disk0 DOWN no device found for this subdisk
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
GEOM_LABEL: Label for provider ad4s1e is ufsid/4b1ce0be071e29a2.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4b1ce0be21298f1b.
Trying to mount root from ufs:/dev/ad4s1a
GEOM_LABEL: Label ufsid/4b1ce0bec75abb36 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/4b1ce0bec75abb36.
GEOM_LABEL: Label ufsid/4b1ce0be071e29a2 removed.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4b1ce0be071e29a2.
GEOM_LABEL: Label ufsid/4b1ce0be21298f1b removed.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4b1ce0be21298f1b.
GEOM_LABEL: Label ufsid/4b1ce0ca5ab60085 removed.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4b1ce0ca5ab60085.
GEOM_LABEL: Label ufsid/4b1ce0bec75abb36 removed.
GEOM_LABEL: Label ufsid/4b1ce0be071e29a2 removed.
GEOM_LABEL: Label ufsid/4b1ce0be21298f1b removed.
GEOM_LABEL: Label ufsid/4b1ce0ca5ab60085 removed.

--------------000405010800080506050105--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B1D05BE.8020905>