Date: Tue, 13 Mar 2012 14:08:46 +0100 From: Jan Winter <jan.winter@kantarmedia.de> To: stable@freebsd.org Subject: bce: Device not configured Message-ID: <4F5F46DE.5050608@kantarmedia.de>
next in thread | raw e-mail | index | archive | help
Hello, on an Dell Blade m610 is not possible to change the network media option: ifconfig bce0 media 100baseTX mediaopt full-duplex up ifconfig: SIOCSIFMEDIA (media): Device not configured Setting the media option to "autoselect" and connecting the m610 to a 100 MBit switch, I always get "no carrier" only 1g full-duplex seems to be working. I have tested this on 8.3-prerelease and 9-stable any Ideas? cheers Jan pciconf -lv bce0@pci0:1:0:0: class=0x020000 card=0x02871028 chip=0x163a14e4 rev=0x20 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme II BCM5709S Gigabit Ethernet' class = network subclass = ethernet dmesg bce0: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1 miibus0: <MII bus> on bce0 brgphy0: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus0 brgphy0: 1000baseSX-FDX, auto bce0: Ethernet address: 00:26:b9:fb:04:0c bce0: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.11); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.5) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1 miibus1: <MII bus> on bce1 brgphy1: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus1 brgphy1: 1000baseSX-FDX, auto bce1: Ethernet address: 00:26:b9:fb:04:0e bce1: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.11); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.5) Coal (RX:6,6,18,18; TX:20,20,80,80)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F5F46DE.5050608>