Date: Sun, 18 Dec 2005 18:24:41 +0200 From: Angel Todorov <attodorov@gmail.com> To: Ariff Abdullah <skywizard@mybsd.org.my> Cc: freebsd-multimedia@freebsd.org Subject: Re: snd_atiixp Message-ID: <4ac1e6310512180824r59f76c15w293f17d2fedb043e@mail.gmail.com> In-Reply-To: <20051218203725.67eec9ff.skywizard@MyBSD.org.my> References: <4ac1e6310512170318qe773688j4de12d1224bb4390@mail.gmail.com> <20051217194834.433aa232.skywizard@MyBSD.org.my> <4ac1e6310512170357v693f769ayd9410c48939c84a1@mail.gmail.com> <4ac1e6310512180216i798eb3f4nca32684693f7566e@mail.gmail.com> <20051218192603.14e8e7cf.skywizard@MyBSD.org.my> <4ac1e6310512180351k412e6ca6rffd9373fcc4c1c47@mail.gmail.com> <20051218203725.67eec9ff.skywizard@MyBSD.org.my>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi Ariff, Thanks! Now it seems to compile successfully , but doesn't seem to work for me for some reason - the pcm0 device is not detected at boot time. I have attached the dmesg, but it just doesn't show any pcm0. What's strange to me is that kldstat shows that both modules are loaded: todorov-bsd-laptop# kldstat Id Refs Address Size Name 1 3 0xffffffff80100000 87afc8 kernel 2 1 0xffffffff8097b000 37cd8 sound.ko 3 1 0xffffffff93ea1000 1e19 snd_atiixp.ko todorov-bsd-laptop# Maybe you know what the problem could be? Thanks in advance. P.S: i can see sth strange in the dmesg: pci0: <multimedia> at device 20.2 (no driver attached) is that supposed to be the sound device? :) Regards, Angel On 12/18/05, Ariff Abdullah <skywizard@mybsd.org.my> wrote: > > On Sun, 18 Dec 2005 13:51:45 +0200 > Angel Todorov <attodorov@gmail.com> wrote: > > Hi Ariff, > > > > Thanks for the reply. The search didn't return any results for *.rej > > , that is, the patch seems to be successfully applied. > > > Your sources screwed somewhere. I would suggest you to rm -rf > > /usr/src/sys/conf/files > /usr/src/sys/dev/sound > /usr/src/sys/sys/soundcard.h > /usr/src/sys/modules/sound > /usr/src/share/man/man4/Makefile > /usr/src/share/man/man4/snd_* > > and re-cvsup again. > > Anyway, here you go: > > http://people.freebsd.org/~ariff/releng6.tar.gz > > > > -- > Ariff Abdullah > MyBSD > > http://www.MyBSD.org.my (IPv6/IPv4) > http://staff.MyBSD.org.my (IPv6/IPv4) > http://tomoyo.MyBSD.org.my (IPv6/IPv4) > [-- Attachment #2 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-STABLE #2: Sun Dec 18 17:29:08 EET 2005 root@todorov-bsd-laptop.mobile:/usr/src/sys/amd64/compile/ATT ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 Mobile Technology MT-32 (1790.84-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 468320256 (446 MB) avail memory = 440348672 (419 MB) ioapic0 <Version 2.1> irqs 0-23 on motherboard acpi0: <PTLTD RSDT> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ohci0: <OHCI (generic) USB controller> mem 0xd0005000-0xd0005fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xd0006000-0xd0006fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0007000-0xd0007fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x84b0-0x84bf at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci8: <ACPI PCI bus> on pcib3 pci8: <network> at device 10.0 (no driver attached) fwohci0: <VIA Fire II (VT6306)> port 0xa400-0xa47f mem 0xd0202000-0xd02027ff irq 16 at device 11.0 on pci8 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:40:ca:01:37:10:01:3a fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:40:ca:10:01:3a fwe0: Ethernet address: 02:40:ca:10:01:3a fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0202800-0xd02028ff irq 17 at device 13.0 on pci8 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:ca:d8:dd:97 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xe0000-0xe3fff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1790838482 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <SAMSUNG MP0804H UE100-14> at ata0-master UDMA100 acd0: DVDR <NEC DVD+/-RW ND-6650A/1.42> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <_NEC DVD+-RW ND-6650A 1.42> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [1563648 x 2048 byte records] Trying to mount root from ufs:/dev/ad0s2a rl0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4ac1e6310512180824r59f76c15w293f17d2fedb043e>