Date: Tue, 21 Aug 2001 21:25:15 -0400 From: Mike Tancsa <mike@sentex.net> To: stable@freebsd.org Subject: panic: vm_page_remove(): page not found in hash Message-ID: <5.1.0.14.0.20010821211138.03798c18@192.168.0.12>
next in thread | raw e-mail | index | archive | help
On a FreeBSD 4.3-STABLE #0: Tue Jul 10 12:20:42 EDT 2001, I was trying to
do a buildworld when the box did a
panic: vm_page_remove(): page not found in hash
... Hmmm, tried it again, and same results. I had a look through the
archives and someone was seeing this on a SMP machine back in OCT, but the
problem went away when they went to a uni processor kernel. Unfortunately
the unit is on a 3ware RAID system and if I recall correctly, I cannot save
a crash to it no? Is this a known issue from around that time ?
The hardware is fairly generic
avail memory = 518156288 (506012K bytes)
Preloaded elf kernel "kernel" at 0xc0303000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030309c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 11
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem
0xff700000-0xff7fffff,0xff8ef000-0xff8effff irq 15 at device 1.0 on p
ci1
fxp0: Ethernet address 00:03:47:07:2a:50
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
twe0: <3ware Storage Controller> port 0xdfa0-0xdfaf irq 14 at device 9.0 on
pci1
twe0: 2 ports, Firmware FE6X 1.00.43.003, BIOS BEXX 1.04.00.009
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 31.1
pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 15
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 14
orm0: <Option ROMs> at iomem
0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to deny, logging limited to 23100 packets/en
try by default
IPv6 packet filtering initialized, logging limited to 1000 packets/entry
DUMMYNET initialized (010124)
twed0: <TwinStor, Normal> on twe0
twed0: 19606MB (40155008 sectors)
Mounting root from ufs:/dev/twed0s1a
WARNING: / was not properly dismounted
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Network Administration, mike@sentex.net
Sentex Communications www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20010821211138.03798c18>