Date: Sun, 22 Jun 2003 13:39:05 +0100 (BST) From: "Matt" <matt@xtaz.co.uk> To: "Scott Mitchell" <scott+freebsd@fishballoon.org> Cc: "M. Warner Losh" <imp@bsdimp.com> Subject: Re: cardbus and xircom ethernet problem Message-ID: <50966.192.168.1.10.1056285545.squirrel@webmail.xtaz.co.uk> In-Reply-To: <20030622122211.GC608@tuatara.fishballoon.org> References: <56950.192.168.1.10.1056189123.squirrel@webmail.xtaz.co.uk> <20030621.214623.112196268.imp@bsdimp.com> <50254.192.168.1.10.1056268835.squirrel@webmail.xtaz.co.uk> <20030622122211.GC608@tuatara.fishballoon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Scott Mitchell said: > > Can you try another card in this machine? It will probably throw up the > same error, but it's worth trying if you can. Unfortunatly this is the only card I have. > > You could also try adding the following lines to /boot/loader.conf to get > some extra debug output: > > hw.cbb.debug=1 > hw.cardbus.debug=1 > hw.cardbus.cis_debug=1 > hw.pccard.debug=1 > hw.pccard.cis_debug=1 > I have just tried this and this puts the machine in a hard lock with CISTPL_NONE 00 scrolling up the screen constantly until after 30 seconds or so it panics with page fault 12 in cbb0. I then tried booting the machine with the card out and then inserting it afterwards and the same thing, lots of scrolling of CISTPL_NONE 00 but this time it did not panic and this came out below: CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_END ff cis mem map cd2b5000 CISTPL_LINKTARGET expected, code ff observed pccard0: check_cis_quirks pccard0: Card has no functions! cbb0: Card card activation failed Is this going to be a lost cause? :) Matt. -- email: matt@xtaz.co.uk - web: http://xtaz.co.uk/ Hardware, n.: The parts of a computer system that can be kicked.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50966.192.168.1.10.1056285545.squirrel>