Date: Fri, 2 Nov 2018 12:24:39 +0300 From: "Andrey V. Elsukov" <bu7cher@yandex.ru> To: Hans Petter Selasky <hps@selasky.org>, Mike Andrews <mandrews@bit0.com> Cc: freebsd-usb@freebsd.org Subject: Re: umodem0, Cisco USB serial console, and quirks Message-ID: <51ae0fc4-7e93-30d6-caa3-393afbe278b6@yandex.ru> In-Reply-To: <5cdb37b5-fca1-99db-cacc-cf72f0cee0df@selasky.org> References: <alpine.BSF.2.21.1709191021260.34953@beast.int.bit0.com> <d9dbef0b-c22e-c7ea-34a2-f36e9e768745@selasky.org> <alpine.BSF.2.21.1709191205280.1218@beast.int.bit0.com> <0c4022f3-bd21-49b5-cadd-daeb9f1f3081@selasky.org> <alpine.BSF.2.21.1709262210180.33243@beast.int.bit0.com> <33f3a1f8-69d1-9240-6381-8a851beb97d0@yandex.ru> <18d57cbe-1235-aedf-45e6-e36b495ca1eb@bit0.com> <15cff2a5-021f-49e5-b287-37a14a9321b3@selasky.org> <5d0a544d-517c-2fb9-84e8-d87704474cce@yandex.ru> <5cdb37b5-fca1-99db-cacc-cf72f0cee0df@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --vTa5WMrkS5kVnvRypvd29CoxC7rNecPSx Content-Type: multipart/mixed; boundary="1pPMmG6ZvvXc10gVG0C6vsKVhjBvlmeXG"; protected-headers="v1" From: "Andrey V. Elsukov" <bu7cher@yandex.ru> To: Hans Petter Selasky <hps@selasky.org>, Mike Andrews <mandrews@bit0.com> Cc: freebsd-usb@freebsd.org Message-ID: <51ae0fc4-7e93-30d6-caa3-393afbe278b6@yandex.ru> Subject: Re: umodem0, Cisco USB serial console, and quirks References: <alpine.BSF.2.21.1709191021260.34953@beast.int.bit0.com> <d9dbef0b-c22e-c7ea-34a2-f36e9e768745@selasky.org> <alpine.BSF.2.21.1709191205280.1218@beast.int.bit0.com> <0c4022f3-bd21-49b5-cadd-daeb9f1f3081@selasky.org> <alpine.BSF.2.21.1709262210180.33243@beast.int.bit0.com> <33f3a1f8-69d1-9240-6381-8a851beb97d0@yandex.ru> <18d57cbe-1235-aedf-45e6-e36b495ca1eb@bit0.com> <15cff2a5-021f-49e5-b287-37a14a9321b3@selasky.org> <5d0a544d-517c-2fb9-84e8-d87704474cce@yandex.ru> <5cdb37b5-fca1-99db-cacc-cf72f0cee0df@selasky.org> In-Reply-To: <5cdb37b5-fca1-99db-cacc-cf72f0cee0df@selasky.org> --1pPMmG6ZvvXc10gVG0C6vsKVhjBvlmeXG Content-Type: text/plain; charset=utf-8 Content-Language: en-US Content-Transfer-Encoding: quoted-printable On 02.11.2018 12:12, Hans Petter Selasky wrote: >> # cu -l /dev/cuaU0 >> Connected >> >> <nothing here> >> >=20 > Did you try "-s" option to set another baudrate? Yes, the result is the same. # cu -s 115200 -l /dev/cuaU0 Connected If I understand correctly from https://www.bit0.com/tmp/usbmon-ciscoasa-verbose.txt The Leftover Capture Data: 80250000000008 and frame[1] WRITE 7 bytes 0000 80 25 00 00 00 00 08 -- -- -- -- -- -- -- -- -- |.%..... is something like configuration data, where 80 25 is 0x2580 =3D=3D 9600, = so it should work with default speed. When I use 115200, I see this: 09:27:52.657367 usbus0.2 SUBM-CTRL-EP=3D00000000,SPD=3DFULL,NFR=3D2,SLEN=3D= 16,IVAL=3D0 frame[0] WRITE 8 bytes 0000 21 20 00 00 00 00 07 00 -- -- -- -- -- -- -- -- |! ...... = | frame[1] WRITE 7 bytes 0000 80 25 00 00 00 00 08 -- -- -- -- -- -- -- -- -- |.%..... = | flags 0x10 <PROXY_BUFFER|0> status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP= |CAN_CANCEL_IMMED|DOING_CALLBACK|0> 09:27:52.657711 usbus0.2 DONE-CTRL-EP=3D00000000,SPD=3DFULL,NFR=3D2,SLEN=3D0,IVAL=3D0,ERR=3D0 frame[0] WRITE 8 bytes frame[1] WRITE 7 bytes flags 0x10 <PROXY_BUFFER|0> status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_I= MMED|DOING_CALLBACK|0> 09:27:52.760528 usbus0.2 SUBM-CTRL-EP=3D00000000,SPD=3DFULL,NFR=3D2,SLEN=3D= 16,IVAL=3D0 frame[0] WRITE 8 bytes 0000 21 20 00 00 00 00 07 00 -- -- -- -- -- -- -- -- |! ...... = | frame[1] WRITE 7 bytes 0000 00 C2 01 00 00 00 08 -- -- -- -- -- -- -- -- -- |....... = | flags 0x10 <PROXY_BUFFER|0> status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP= |CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0> 0x01c200 =3D=3D 115200. --=20 WBR, Andrey V. Elsukov --1pPMmG6ZvvXc10gVG0C6vsKVhjBvlmeXG-- --vTa5WMrkS5kVnvRypvd29CoxC7rNecPSx Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Comment: Using GnuPG with Thunderbird - https://www.enigmail.net/ iQEzBAEBCAAdFiEE5lkeG0HaFRbwybwAAcXqBBDIoXoFAlvcF9cACgkQAcXqBBDI oXphhAgAsUsPedS/bUNLcY6Qv+hctaRP2sjmbJlIEqEMHIL9zQdSpqCikcliM79s yXCfD8gYya8mEDJQv8AsFLO3NdNtij9h8WBsuhmv123yaQBN/bCuxuC/x8v52FoV aCZltKT8KWEsE9zhZLEc51cPRhPNrtl7loVRa7Mcq2pXt/7vAoLL7hl+5KeLzObQ CFiVtfpBwpD34FxAHa83mYHSbvQ/07vv6GuhG9H2QS0q8AmGwDXlt+Pfa7P2/qQ9 MXwvsy5JyxESWWDP+1mBRgQrWFR43gy90PKQ3y7myQ2668gM+wOWLoOyFMF9r7Xm ayKYlAWvcZ1uBbcICwWkdNHbp/wtBg== =kp2L -----END PGP SIGNATURE----- --vTa5WMrkS5kVnvRypvd29CoxC7rNecPSx--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51ae0fc4-7e93-30d6-caa3-393afbe278b6>