Date: Mon, 07 Oct 2013 13:36:30 -0400 From: tzoi516 <tzoi516@gmail.com> To: Jim Bryant <kc5vdj.freebsd@gmail.com>, freebsd-drivers@freebsd.org Subject: Re: Latitude E6400 Drivers Message-ID: <5252F11E.8020404@gmail.com> In-Reply-To: <5252EB4D.1030604@gmail.com> References: <5251A405.1010304@gmail.com> <5252EB4D.1030604@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Great, thanks. Does pciconf show you having the MEI controller? Is if it does, is it none or did you use something else? On 10/07/13 13:11, Jim Bryant wrote: > I'm running on an E5500, and it isn't too different. > > here's an example of my dmesg. > > Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, > 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of > the University of California. All rights reserved. FreeBSD is a > registered trademark of The FreeBSD Foundation. FreeBSD > 9.2-PRERELEASE #0 r255757: Sat Sep 21 06:32:15 CDT 2013 > > jbryant@argus.electron-tube.net:/usr/obj/usr/src/sys/LATITUDE-E5500-GM45 > > amd64 > gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) > Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.04-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 > Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > > > Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> > > AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics real memory = > 4294967296 (4096 MB) avail memory = 4054933504 (3867 MB) Event > timer "LAPIC" quality 400 ACPI APIC Table: <DELL M09 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 > package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: > 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on > motherboard wlan: mac acl policy registered kbd1 at kbdmux0 > smbios0: <System Management BIOS> at iomem 0xf6c20-0xf6c3e on > motherboard smbios0: Version: 2.4, BCD Revision: 2.4 cryptosoft0: > <software crypto> on motherboard acpi0: <DELL M09 > on > motherboard ACPI Warning: Incorrect checksum in table [TCPA] - > 0xC4, should be 0x68 (20110527/tbutils-282) hpet0: <High Precision > Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter > "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" > frequency 14318180 Hz quality 450 Event timer "HPET1" frequency > 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz > quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 > acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of > e0000, 20000 (3) failed acpi0: reservation of 100000, dd28d400 (3) > failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 atrtc0: > <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 Event > timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port > 0x40-0x43,0x50-0x53 irq 2 on acpi0 Timecounter "i8254" frequency > 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz > quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality > 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b > on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934 > on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> > port 0xefe8-0xefef mem 0xf6c00000-0xf6ffffff,0xe0000000-0xefffffff > irq 16 at device 2.0 on pci0 acpi_video0: <ACPI video extension> on > vgapci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: > aperture size is 256M, detected 32764k stolen memory vgapci1: > <VGA-compatible display> mem 0xf6b00000-0xf6bfffff at device 2.1 on > pci0 acpi_video1: <ACPI video extension> on vgapci1 ACPI Warning: > For \134_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) > (20110527/nspredef-500) evaluation of \134_SB_.PCI0.VID2._DOD makes > no sense uhci0: <Intel 82801I (ICH9) USB controller> port > 0x6f60-0x6f7f irq 20 at device 26.0 on pci0 usbus0 on uhci0 uhci1: > <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at > device 26.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801I (ICH9) USB > controller> port 0x6fa0-0x6fbf irq 22 at device 26.2 on pci0 usbus2 > on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem > 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 usbus3: EHCI > version 1.0 usbus3 on ehci0 hdac0: <Intel 82801I HDA Controller> > mem 0xf6afc000-0xf6afffff irq 21 at device 27.0 on pci0 pcib1: > <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci11: <ACPI PCI bus> > on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci12: > <ACPI PCI bus> on pcib2 iwn0: <Intel WiFi Link 5100> mem > 0xf69fe000-0xf69fffff irq 17 at device 0.0 on pci12 pcib3: <ACPI > PCI-PCI bridge> at device 28.4 on pci0 pci9: <ACPI PCI bus> on > pcib3 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC > rev. 0x00a200> mem 0xf68f0000-0xf68fffff irq 16 at device 0.0 on > pci9 bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E > miibus0: <MII bus> on bge0 brgphy0: <BCM5722 1000BASE-T media > interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, > 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet > address: nn:nn:nn:nn:nn:nn uhci3: <Intel 82801I (ICH9) USB > controller> port 0x6f00-0x6f1f irq 20 at device 29.0 on pci0 usbus4 > on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port > 0x6f20-0x6f3f irq 21 at device 29.1 on pci0 usbus5 on uhci4 uhci5: > <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at > device 29.2 on pci0 usbus6 on uhci5 ehci1: <Intel 82801I (ICH9) USB > 2.0 controller> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on > pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib4: <ACPI PCI-PCI > bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib4 cbb0: > <RF5C476 PCI-CardBus Bridge> irq 19 at device 1.0 on pci2 cardbus0: > <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: > <1394 Open Host Controller Interface> mem 0xf67ff800-0xf67fffff irq > 17 at device 1.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) > fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 > 38:4f:c0:00:1f:32:1d:e1 fwohci0: Phy 1394a available S400, 1 > ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: > <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset > fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: > node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sdhci0: <RICOH > R5C822 SD> mem 0xf67ff600-0xf67ff6ff irq 18 at device 1.2 on pci2 > sdhci0: 1 slot(s) allocated pci2: <base peripheral> at device 1.3 > (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on > pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9M AHCI SATA > controller> port > 0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf > > mem 0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not > supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: > <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at > channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 > ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1100-0x111f > mem 0xf6afbf00-0xf6afbfff irq 19 at device 31.3 on pci0 smbus0: > <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on > smbus0 acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> > on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control > Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: > <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on > acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: > [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 > flags 0x10 on acpi0 tpm0: <Trusted Platform Module> port > 0xcb0-0xcbb iomem 0xfed40000-0xfed44fff on acpi0 tpm: Broadcom > BCM0102 rev 0x20 ichwd0 on isa0 orm0: <ISA Option ROM> at iomem > 0xc0000-0xcffff on isa0 sc0: <System console> at flags 0x100 on > isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA > VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: <ATA > channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: <ATA > channel> at port 0x170-0x177,0x376 irq 15 on isa0 coretemp0: <CPU > On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency > Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced > SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal > Control> on cpu1 SGI XFS with large block numbers, tracing, no > debug enabled Timecounters tick every 1.000 msec bge0f0: Ethernet > address: nn:nn:nn:nn:nn:nn bge0f1: Ethernet address: > nn:nn:nn:nn:nn:nn bge0f2: Ethernet address: nn:nn:nn:nn:nn:nn > bge0f3: Ethernet address: nn:nn:nn:nn:nn:nn IPsec: Initialized > Security Association Processing. ncp_load: loaded ipfw2 (+ipv6) > initialized, divert enabled, nat enabled, default to accept, > logging disabled DUMMYNET 0 with IPv6 initialized (100409) > firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: > bus manager 0 load_dn_sched dn_sched FIFO loaded load_dn_sched > dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded > load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ > loaded hdacc0: <IDT 92HD71B7 HDA CODEC> at cad 0 on hdac0 hdaa0: > <IDT 92HD71B7 Audio Function Group> at nid 1 on hdacc0 pcm0: <IDT > 92HD71B7 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,14 on hdaa0 pcm1: > <IDT 92HD71B7 (Ext-Left Analog Line-out)> at nid 15 on hdaa0 pcm2: > <IDT 92HD71B7 (Left Digital)> at nid 30 on hdaa0 hdacc1: <Intel > Cantiga HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Cantiga Audio > Function Group> at nid 1 on hdacc1 pcm3: <Intel Cantiga (HDMI 8ch)> > at nid 3 on hdaa1 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps > Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: > 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB > v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at > usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr > 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root > HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> > at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, > addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI > root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: > <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev > 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: > <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, > rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: > <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC > WD5000BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device ada0: > 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: > Command Queueing enabled ada0: 476940MB (976773168 512 byte > sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: > AP CPU #1 Launched! hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> > TSC/1/64/0x20<REA> > IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> > IAF/3/40/0x67<INT,USR,SYS,REA,WRI> cd0 at ahcich1 bus 0 scbus1 > target 0 lun 0 cd0: <HL-DT-ST CDRW/DVD GCCT20N A106> Removable > CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, > ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size > failed: NOT READY, Medium not present uhub0: 2 ports with 2 > removable, self powered uhub1: 2 ports with 2 removable, self > powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 > ports with 2 removable, self powered uhub5: 2 ports with 2 > removable, self powered uhub6: 2 ports with 2 removable, self > powered Root mount waiting for: usbus7 usbus3 Root mount waiting > for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered > uhub7: 6 ports with 6 removable, self powered Root mount waiting > for: usbus7 usbus3 Root mount waiting for: usbus7 ugen2.2: <vendor > 0x08ff> at usbus2 Root mount waiting for: usbus7 Root mount waiting > for: usbus7 Root mount waiting for: usbus7 ugen7.2: <KMicron> at > usbus7 umass0: <MSC Bulk-Only Transfer> on usbus7 > (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 > 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status > Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition > (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 > (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error > 22, Unretryable error da0 at umass-sim0 bus 0 scbus6 target 0 lun > 0 da0: <WDC WD30 EZRX-00DC0B0 > Fixed Direct Access SCSI-5 device > da0: 40.000MB/s transfers da0: 2861588MB (5860533168 512 byte > sectors: 255H 63S/T 364801C) da0: quirks=0xa<NO_6_BYTE,4K> Root > mount waiting for: usbus7 ugen7.3: <JMicron> at usbus7 umass1: <MSC > Bulk-Only Transport> on usbus7 (probe0:umass-sim1:1:0:0): REPORT > LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 > (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error > (probe0:umass-sim1:1:0:0): SCSI status: Check Condition > (probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 > (Invalid command operation code) (probe0:umass-sim1:1:0:0): Error > 22, Unretryable error da1 at umass-sim1 bus 1 scbus7 target 0 lun > 0 da1: <WDC WD30 EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6 > device da1: 40.000MB/s transfers da1: 2861588MB (5860533168 512 > byte sectors: 255H 63S/T 364801C) da1: quirks=0xa<NO_6_BYTE,4K> da2 > at umass-sim1 bus 1 scbus7 target 0 lun 1 da2: <WDC WD30 > EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6 device da2: > 40.000MB/s transfers da2: 2861588MB (5860533168 512 byte sectors: > 255H 63S/T 364801C) da2: quirks=0xa<NO_6_BYTE,4K> Root mount > waiting for: usbus7 ugen7.4: <vendor 0x05e3> at usbus7 uhub8: > <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> on > usbus7 ugen5.2: <Logitech> at usbus5 ums0: <Logitech USB Receiver, > class 0/0, rev 2.00/57.01, addr 2> on usbus5 ums0: 16 buttons and > [XYZT] coordinates ID=0 Root mount waiting for: usbus7 uhid0: > <Logitech USB Receiver, class 0/0, rev 2.00/57.01, addr 2> on > usbus5 uhub8: 4 ports with 3 removable, self powered Root mount > waiting for: usbus7 ugen7.5: <Sunplus Technology Inc.> at usbus7 > umass2: <Bulk Only Interface> on usbus7 da3 at umass-sim2 bus 2 > scbus8 target 0 lun 0 da3: <WDC WD20 EADS-11R6B1 > Fixed Direct > Access SCSI-2 device da3: 40.000MB/s transfers da3: 1907729MB > (3907029168 512 byte sectors: 255H 63S/T 243201C) da3: > quirks=0x2<NO_6_BYTE> ugen7.6: <vendor 0x05e3> at usbus7 uhub9: > <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 6> on > usbus7 uhub9: 4 ports with 4 removable, self powered ugen7.7: > <vendor 0x1130> at usbus7 ukbd0: <vendor 0x1130 PCsensor Temper, > class 0/0, rev 1.10/1.50, addr 7> on usbus7 kbd2 at ukbd0 uhid1: > <vendor 0x1130 PCsensor Temper, class 0/0, rev 1.10/1.50, addr 7> > on usbus7 Trying to mount root from ufs:/dev/ada0s4a [rw]... > interface oldnfs.1 already present in the KLD 'kernel'! > linker_load_file: Unsupported file type nfsd: can't register svc > name fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 g_dev_taste: > make_dev_p() failed (gp->name=md0s4, error=17) drm0: <Mobile > Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI > enabled 1 message(s) info: [drm] AGP at 0xe0000000 256MB info: > [drm] Initialized i915 1.6.0 20080730 ugen7.8: <Samsung > Electronics> at usbus7 umass3: <Mass Storage> on usbus7 da4 at > umass-sim3 bus 3 scbus9 target 0 lun 0 da4: <Android UMS Composite > 0001> Removable Direct Access SCSI-2 device da4: 40.000MB/s > transfers da4: Attempt to query device size failed: NOT READY, > Medium not present da4: quirks=0x2<NO_6_BYTE> da5 at umass-sim3 bus > 3 scbus9 target 0 lun 1 da5: <Android UMS Composite 0001> Removable > Direct Access SCSI-2 device da5: 40.000MB/s transfers da5: Attempt > to query device size failed: NOT READY, Medium not present da5: > quirks=0x2<NO_6_BYTE> > > tzoi516 wrote: Hi, > > I'm able to find solutions to most drivers, but I'm having trouble > determining what to load for these: > > none0@pci0:0:3:0: class=0x078000 card=0x02331028 > chip=0x2a448086 rev=0x07 hdr=0x00 vendor = 'Intel Corporation' > device = 'Mobile 4 Series Chipset MEI Controller' class = > simple comms bar [10] = type Memory, range 64, base 0xf6fd9ef0, > size 16, enabled cap 01[50] = powerspec 3 supports D0 D3 current > D0 cap 05[8c] = MSI supports 1 message, 64 bit > > none1@pci0:0:3:3: class=0x070002 card=0x02331028 > chip=0x2a478086 rev=0x07 hdr=0x00 vendor = 'Intel Corporation' > device = 'Mobile 4 Series Chipset AMT SOL Redirection' class > = simple comms subclass = UART bar [10] = type I/O Port, range > 32, base 0xef88, size 8, enabled bar [14] = type Memory, range > 32, base 0xf6fda000, size 4096, enabled cap 01[c8] = powerspec 3 > supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 > bit > > none2@pci0:0:31:3: class=0x0c0500 card=0x02331028 > chip=0x29308086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' > device = '82801I (ICH9 Family) SMBus Controller' class = > serial bus subclass = SMBus bar [10] = type Memory, range 64, > base 0xf6fd9f00, size 256, enabled bar [20] = type I/O Port, > range 32, base 0x1100, size 32, enabled > > > none3@pci0:3:1:1: class=0x080501 card=0x02331028 > chip=0x08221180 rev=0x21 hdr=0x00 vendor = 'Ricoh Co Ltd' > device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' class > = base peripheral subclass = SD host controller bar [10] = type > Memory, range 32, base 0xf1bff600, size 256, enabled cap 01[80] = > powerspec 2 supports D0 D1 D2 D3 current D0 > > none4@pci0:3:1:2: class=0x088000 card=0x02331028 > chip=0x08431180 rev=0x11 hdr=0x00 vendor = 'Ricoh Co Ltd' > device = 'R5C843 MMC Host Controller' class = base > peripheral bar [10] = type Memory, range 32, base 0xf1bff700, > size 256, enabled cap 01[80] = powerspec 2 supports D0 D1 D2 D3 > current D0 > > I know people are busy, but any links or references to help find > drivers or modules would be appreciated. I've used man and PCI > driver sites to help narrow down, but nothing helped. mmc and mmcsd > modules don't work with the Ricoh devices, per pciconf. Thanks. > >> _______________________________________________ >> freebsd-drivers@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-drivers To >> unsubscribe, send any mail to >> "freebsd-drivers-unsubscribe@freebsd.org" . >> >> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (FreeBSD) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iQEcBAEBAgAGBQJSUvEeAAoJEDHcsSNRIRfJ/2oH/RnMhzThoHrIf9X7XdYYD1/S kRNAOe7yF7+Mh9YW/uPuKoPjmgNUxOLK8iHXtSuMcXQkDYvsPRPxtHSjgbk8Y8cC +HKTZA7LTLhQ60DNUXHY7hl3dgqhuqFfZLdXQoi1vmXLNDL97hMnHlp5825S0jHf ZhFdg+BIgCOYpydScYCSmcCnzn2lL5wsl0kbiPATkhl3YfvDKvwMwoopiGcK9bPf Q3KVyGYE1hvg9JJMMMamMnMDVJrJLmrVJ3wqX7F5Ay3DsxR1bFU1k8/xww6Hgcwq 8KqZywCQN1W9zqOM/r6CWcZkheC0rg+zG+GV+UYKcVVK3kO9dK2uvTm00kMnAvE= =JOcC -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5252F11E.8020404>