Date: Thu, 29 Dec 2022 13:39:36 -0600 From: Mike Karels <mike@karels.net> To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: rpi3b+ ue0 too late to be configured on boot? Message-ID: <52FD04A5-27B4-4C61-9C97-795D2D65135E@karels.net> In-Reply-To: <8srop579-r4sq-278-356p-nr7q81n31s4@mnoonqbm.arg> References: <8srop579-r4sq-278-356p-nr7q81n31s4@mnoonqbm.arg>
next in thread | previous in thread | raw e-mail | index | archive | help
On 28 Dec 2022, at 16:42, Bjoern A. Zeeb wrote: > Hi, > > does anyone else have the problem on latest main that the ue0 on an > rpi3b+ doesn't show up in time for the rc netif to configure it (or at > least it looks like)? I don=E2=80=99t see that problem. I tried the 12/24 snapshot of main on = an RPi3B+, and ue0 configured via DHCP on the initial boot, and on a reboot.= I did have problems with the HDMI console, some of which are new; I will follow up on that separately. Specifically, USB keyboard input didn=E2=80= =99t work to the loader, and I didn=E2=80=99t see console output from user-lev= el startup until I disabled boot_multicons and boot_serial. The second problem is relatively new. Mike > While during boot USB seems to need a wait-delay now, which it hadn't i= n > the last years for me? > > -----------------------------------------------------------------------= - > ... > Feeding entropy: . > ELF ldconfig path: /lib /usr/lib > ugen1.2: <vendor 0x0424 product 0x9514> at usbus1 > uhub1 on uhub0 > uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2>= on usbus1 > uhub1: MTT enabled > lo0: link state changed to UP > uhub1: 5 ports with 4 removable, self powered > ugen1.3: <vendor 0x0424 product 0xec00> at usbus1 > smsc0 on uhub1 > smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1 > smsc0: chip 0xec00, rev. 0002 > miibus0: <MII bus> on smsc0 > smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0 > smscphy0: OUI 0x00800f, model 0x000c, rev. 3 > smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ue0: <USB Ethernet> on smsc0 > ue0: bpf attached > ue0: Ethernet address: xx:xx:xx:xx:xx:xx > Starting Network: lo0. > lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > ... > -----------------------------------------------------------------------= - > > If running manually after boot (again) it all works fine? > > # sh /etc/rc.d/netif start ue0 > smsc0: chip 0xec00, rev. 0002 > Starting Network: ue0. > ue0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 > ... > > > > Not that it should matter - this is with https://github.com/pftf/RPi3/r= eleases/tag/v1.38 > > /bz > > -- = > Bjoern A. Zeeb r15:= 7
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52FD04A5-27B4-4C61-9C97-795D2D65135E>