Date: Wed, 05 Nov 2014 23:44:15 +0000 From: Steven Hartland <killing@multiplay.co.uk> To: freebsd-stable@freebsd.org Subject: Re: 10.1 RC4 r273903 - zpool scrub on ssd mirror - ahci command timeout Message-ID: <545AB64F.1060502@multiplay.co.uk> In-Reply-To: <20141106003240.344dedf6@orwell> References: <20141106003240.344dedf6@orwell>
next in thread | previous in thread | raw e-mail | index | archive | help
Looks like a HW issue, how is it connected to the controller and what is the controller? On 05/11/2014 23:32, Kai Gallasch wrote: > Hi. > > Not sure if this is 10.1 related or more a problem of the ssd > model and/or ahci controller.. > > I am currently running 10.1 RC4 r273903 on a zfs on root server with two > mirror pools. One of the pools is a mirror consisting of two Samsung > SSD 850 PRO 512GB SSDs. > > When I start a zfs scrub on this pool the result of the scrub is: > > # zpool status -v ssdpool > pool: ssdpool > state: ONLINE > status: One or more devices has experienced an unrecoverable error. An > attempt was made to correct the error. Applications are > unaffected. action: Determine if the device needs to be replaced, and > clear the errors using 'zpool clear' or replace the device with 'zpool > replace'. see: http://illumos.org/msg/ZFS-8000-9P > scan: scrub repaired 73K in 0h8m with 0 errors on Thu Nov 6 00:00:16 > 2014 config: > > NAME STATE READ WRITE CKSUM > ssdpool ONLINE 0 0 0 > mirror-0 ONLINE 0 0 0 > gpt/ssdpool0 ONLINE 0 0 17 > gpt/ssdpool1 ONLINE 0 0 29 > > When I do a 'zpool clear' the pool status looks ok again. But when I > again start a zpool scrub the same thing happens again and the > above status "One or more devices has experienced an unrecoverable > error" shows again. > > > I find the following kernel message in the output of 'dmesg': (after > running zpool scrub two times) > > > ahcich2: Timeout on slot 15 port 0 > ahcich2: is 00000000 cs 000f0000 ss 000f8000 rs 000f8000 tfd 40 serr > 00000000 cmd 0024cf17 (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 > 8b a6 1d 56 40 0d 00 00 00 00 00 (ada2:ahcich2:0:0:0): CAM status: > Command timeout (ada2:ahcich2:0:0:0): Retrying command > ahcich2: Timeout on slot 23 port 0 > ahcich2: is 00000000 cs 0f000000 ss 0f800000 rs 0f800000 tfd 40 serr > 00000000 cmd 0024d817 (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 > 1b 23 81 bc 40 06 00 00 00 00 00 (ada2:ahcich2:0:0:0): CAM status: > Command timeout (ada2:ahcich2:0:0:0): Retrying command > ahcich2: Timeout on slot 3 port 0 > ahcich2: is 00000000 cs 00000030 ss 00000038 rs 00000038 tfd 40 serr > 00000000 cmd 0024c317 (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 > 26 bd 18 8e 40 12 00 00 00 00 00 (ada2:ahcich2:0:0:0): CAM status: > Command timeout (ada2:ahcich2:0:0:0): Retrying command > > > Besides: smartctl shows no error on ada2. > Here comes the output.. > > # smartctl -a -q noserial /dev/ada2 > smartctl 6.3 2014-07-26 r3976 [FreeBSD 10.1-RC4 amd64] (local build) > Copyright (C) 2002-14, Bruce Allen, Christian Franke, > www.smartmontools.org > > === START OF INFORMATION SECTION === > Device Model: Samsung SSD 850 PRO 512GB > Firmware Version: EXM01B6Q > User Capacity: 512,110,190,592 bytes [512 GB] > Sector Size: 512 bytes logical/physical > Rotation Rate: Solid State Device > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c > SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) > Local Time is: Thu Nov 6 00:02:04 2014 CET > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection > activity was never started. > Auto Offline Data Collection: > Disabled. Self-test execution status: ( 0) The previous > self-test routine completed without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 0) seconds. > Offline data collection > capabilities: (0x53) SMART execute Offline > immediate. Auto Offline data collection on/off support. > Suspend Offline collection upon > new command. > No Offline surface scan > supported. Self-test supported. > No Conveyance Self-test > supported. Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before > entering power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging > supported. Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 33) minutes. > SCT capabilities: (0x003d) SCT Status supported. > SCT Error Recovery Control > supported. SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 1 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 > 100 010 Pre-fail Always - 0 9 Power_On_Hours > 0x0032 099 099 000 Old_age Always - 154 12 > Power_Cycle_Count 0x0032 099 099 000 Old_age > Always - 5 177 Wear_Leveling_Count 0x0013 100 100 > 000 Pre-fail Always - 0 179 Used_Rsvd_Blk_Cnt_Tot > 0x0013 100 100 010 Pre-fail Always - 0 181 > Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age > Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 > 010 Old_age Always - 0 183 Runtime_Bad_Block > 0x0013 100 100 010 Pre-fail Always - 0 187 > Reported_Uncorrect 0x0032 100 100 000 Old_age > Always - 0 190 Airflow_Temperature_Cel 0x0032 070 068 > 000 Old_age Always - 30 195 Hardware_ECC_Recovered > 0x001a 200 200 000 Old_age Always - 0 199 > UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age > Always - 0 235 Unknown_Attribute 0x0012 100 100 > 000 Old_age Always - 0 241 Total_LBAs_Written > 0x0032 099 099 000 Old_age Always - 400466433 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining > LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed > without error 00% 147 - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute > delay. > > I wonder What is the possible reason for this. Both SSDs are new. > Is this a common problem with zfs and SSDs (for example ahci timeouts > because of high data rates for a bus ?) > > K. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?545AB64F.1060502>