Date: Thu, 7 Jan 2010 09:32:06 +0000 From: Andrew <andrew@flarn.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-gnats-submit@freebsd.org, freebsd-usb@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Message-ID: <54854a7a1001070132o729ffae0qa47874ac2337afc0@mail.gmail.com> In-Reply-To: <201001062143.56029.hselasky@c2i.net> References: <201001062026.o06KQ3VP043830@www.freebsd.org> <201001062143.56029.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
2010/1/6 Hans Petter Selasky <hselasky@c2i.net>: > On Wednesday 06 January 2010 21:26:03 Andrew wrote: >> >Number: 142387 >> >Category: usb >> >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload >> >Confidential: no >> >Severity: non-critical >> >Priority: low >> >Responsible: freebsd-usb >> >State: open >> >Quarter: >> >Keywords: >> >Date-Required: >> >Class: sw-bug >> >Submitter-Id: current-users >> >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 >> >Closed-Date: >> >Last-Modified: >> >Originator: Andrew >> >Release: 8-STABLE >> >Organization: >> >Environment: >> >> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT >> 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 >> >> >Description: >> >> After running uathload the device changes from: >> ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=0 md=HOST >> spd=HIGH (480Mbps) pwr=ON >> >> bLength = 0x0012 >> bDescriptorType = 0x0001 >> bcdUSB = 0x0200 >> bDeviceClass = 0x00ff >> bDeviceSubClass = 0x0000 >> bDeviceProtocol = 0x0000 >> bMaxPacketSize0 = 0x0040 >> idVendor = 0x1385 >> idProduct = 0x5f01 >> bcdDevice = 0x0001 >> iManufacturer = 0x0001 <Atheros Communications Inc> >> iProduct = 0x0002 <WPN111> >> iSerialNumber = 0x0003 <1.0> >> bNumConfigurations = 0x0001 >> to: >> ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=0 md=HOST >> spd=HIGH (480Mbps) pwr=ON >> >> bLength = 0x0012 >> bDescriptorType = 0x0001 >> bcdUSB = 0x0200 >> bDeviceClass = 0x00ff >> bDeviceSubClass = 0x0000 >> bDeviceProtocol = 0x0000 >> bMaxPacketSize0 = 0x0040 >> idVendor = 0x1385 >> idProduct = 0x5f02 >> bcdDevice = 0x0001 >> iManufacturer = 0x0001 <Atheros Communications Inc> >> iProduct = 0x0002 <WPN111> >> iSerialNumber = 0x0003 <1.0> >> bNumConfigurations = 0x0001 >> >> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 >> >> >How-To-Repeat: >> >> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X >> >> >Fix: >> >> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch >> attached. >> >> uath now attachs: >> >> dmesg: >> ugen3.2: <Atheros Communications Inc> at usbus3 (disconnected) >> ugen3.2: <Atheros Communications Inc> at usbus3 >> uath0: <Atheros Communications Inc WPN111, rev 2.00/0.01, addr 2> on usbus3 >> >> >> ifconfig uath0 >> uath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 >> ether 00:14:6c:ea:81:a4 >> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >> status: no carrier >> >> >> Patch attached with submission follows: >> >> --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 >> +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 >> @@ -2005,8 +2005,8 @@ >> product NETGEAR2 MA101B 0x4102 MA101 Rev B >> product NETGEAR3 WG111T 0x4250 WG111T >> product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) >> -product NETGEAR3 WPN111 0x5f00 WPN111 >> product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) >> +product NETGEAR3 WPN111 0x5f02 WPN111 >> >> /* Nikon products */ >> product NIKON E990 0x0102 Digital Camera E990 >> >> >Release-Note: >> >Audit-Trail: >> >Unformatted: > > Hi, > > Are you certain that product "0x5f00" is incorrect and that we shouldn't add > the new product, 0x5f02 instead? I can't be certain no, it was an assumption on my part that the WPN111 id was incorrect as the WPN111_NF was correct for the device. Adding a second id for WPN111 will be enough for my hardware to work. Thanks, Andrew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54854a7a1001070132o729ffae0qa47874ac2337afc0>