Date: Wed, 07 Jan 2015 01:00:40 +0100 From: Miroslav Lachman <000.fbsd@quip.cz> To: freebsd-usb@FreeBSD.org Subject: Action Cam SJ4000 (SJCAM) unrecognized as mass storage Message-ID: <54AC7728.1020306@quip.cz>
next in thread | raw e-mail | index | archive | help
I have action camera SJ4000 based on Novatek NTK96650+AR0330 solution. It has a USB cable and can be connected as USB mass storage, but FreeBSD 10.1 does not properly recognize it. ugen1.4: <NOVATEK> at usbus1 umass0: <NOVATEK J1455, class 0/0, rev 2.00/1.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): unsupportable block size 0 Are there any quirks that I can try to attach this cam as mass storage? # usbconfig -d 1.4 dump_device_desc ugen1.4: <J1455 NOVATEK> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x0603 idProduct = 0x8611 bcdDevice = 0x0100 iManufacturer = 0x0001 <NOVATEK > iProduct = 0x0002 <J1455 > iSerialNumber = 0x0003 <966110000000100> bNumConfigurations = 0x0001 What more details should I provide? Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54AC7728.1020306>