Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 19 Sep 2015 02:00:19 +0100
From:      Steven Hartland <killing@multiplay.co.uk>
To:        freebsd-ports@freebsd.org
Subject:   Re: ZFS 9.2/9.3 oh so broken...
Message-ID:  <55FCB3A3.3000801@multiplay.co.uk>
In-Reply-To: <55FC91EA.8000605@sorbs.net>
References:  <55FC91EA.8000605@sorbs.net>

next in thread | previous in thread | raw e-mail | index | archive | help
freebsd-ports@ is not really the right mailing list for this as there's 
no ports involved, unless I'm totally missing something, best place is 
freebsd-fs@.

You might want to consider triming your mail a little in the future as 
107Kb when the last zpool status below would had done is little 
excessive don't you think?

Its also a good idea to sumarise any issue in the subject, something 
like "zpool status still showing resilvering when complete"

With regards your problem, it seems like a display issue but have you tried:
1. zpool clear
2. reboot

Do either clear the problem?

9.x is really quite old I'd strongly advise you move to 10.2 as it 
includes a lot of fixes and enhancements to many areas including ZFS.

On 18/09/2015 23:36, Matthew Sullivan wrote:
> Ok it's 9.2 so "unsupported" - but I believe the code is unchanged for
> this one in 9.3.... which *is* supported....
>
>
> Here's the last couple of days after the failure of a drive...  I
> realised there was no point in swaping back in the new drive and I
> should make the swap drive perm, and use the new drive as a hotspare....
> so followed: http://docs.oracle.com/cd/E19253-01/819-5461/gcvdi/index.html
>
> ... that was a mistake...
>
> ..online,spun_up       none     0x500062b200320021
>    pool: storage
>   state: ONLINE
> status: One or more devices is currently being resilvered.  The pool will
>      continue to function, possibly in a degraded state.
> action: Wait for the resilver to complete.
>    scan: resilver in progress since Thu Sep 17 00:20:00 2015
>          14.1T scanned out of 27.1T at 1/s, (scan is slow, no estimated time)
>          935G resilvered, 51.97% done
> config:
>
>      NAME        STATE     READ WRITE CKSUM
>      storage     ONLINE       0     0     0
>        raidz2-0  ONLINE       0     0     0
>          mfid10  ONLINE       0     0     0
>          mfid8   ONLINE       0     0     0
>          mfid12  ONLINE       0     0     0
>          mfid0   ONLINE       0     0     0
>          mfid14  ONLINE       0     0     0
>          mfid15  ONLINE       0     0     0
>          mfid1   ONLINE       0     0     0
>          mfid7   ONLINE       0     0     0
>          mfid2   ONLINE       0     0     0
>          mfid9   ONLINE       0     0     0
>          mfid3   ONLINE       0     0     0
>          mfid4   ONLINE       0     0     0
>          mfid5   ONLINE       0     0     0
>          mfid6   ONLINE       0     0     0
>          mfid11  ONLINE       0     0     0
>      spares
>        mfid13    AVAIL
>
> errors: No known data errors
> root@colossus:~ #
>
>
> ... so online (no errors) and still resilvering....!!!
>
> Michelle
> _______________________________________________
> freebsd-ports@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-ports
> To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55FCB3A3.3000801>