Date: Sun, 13 Dec 2015 16:09:25 -0553.75 From: "William A. Mahaffey III" <wam@hiwaay.net> To: FreeBSD X11 mailing list <freebsd-x11@freebsd.org> Subject: Re: problems booting w/ X11 ati driver Message-ID: <566DEB4B.5050808@hiwaay.net> In-Reply-To: <566DCCFA.3060301@b1t.name> References: <566D9A13.9050208@hiwaay.net> <566DCCFA.3060301@b1t.name>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------050004050907060201030300 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit On 12/13/15 14:00, Volodymyr Kostyrko wrote: > On 13.12.2015 18:15, William A. Mahaffey III wrote: >> >> >> I tried activating use of the X11 ati (also radeon) driver this A.M. I >> also did a full pkg upgrade & freebsd-update. When I rebooted, >> everything went AOK. When I logged in, my setup starts XFCE by default >> from .xinitrc (IIRC). I also had drm_load & radeonkms_load activated in >> my /boot/loader.conf file. The drm & radeon modules didn't get started >> up correctly & X11 wouldn't start, see 1st attached. I commented out the >> drm & radeon lines in my loader.conf & rebooted & tried again. Still >> nogo, see 2nd attached. I also tried setting my driver to ati & radeon, >> w/ no loader loads, still nogo. I went back to my stock xorg.conf, using >> vesa driver & got logged in AOK as always, see 3rd attached. My >> xorg.conf is a bit cluttered from various attempts to get other stuff >> working (vbox, etc.), but w/ VESA driver starts XFCE AOK. My hardware is >> visible in the xorg.conf file, uname below. > > Please attach the output of `dmesg` after you try it with radeon. The > words "Failed to load kernel module for pci:0000:00:01.0: Exec format > error" mostly look like a problem with loading a kernel module. You > don't need to preload any modules from `loader.conf` - Xorg will try > load everything it would need anyway. And `dmesg` will show what goes > on when modules are initialized. > >> Is my CPU/APU supported for the ati or radeon driver (even if not full >> 3D) ? The wiki implies not, but doesn't specifically mention my combo, >> so I ask. TIA & have a good one. > > Well yes, wiki states that it's not supported. On the other hand wiki > mentions the full list of what you can provide to check what was the > problem for those devices: https://wiki.freebsd.org/Graphics#Reporting Yeah, sorry for not being more methodical. I rebooted 3-4 times in fairly quick succession, however, I *think* I have dmesg output from the above scenario, see attached. If you want any of the other stuff mentioned, just ask. -- William A. Mahaffey III ---------------------------------------------------------------------- "The M1 Garand is without doubt the finest implement of war ever devised by man." -- Gen. George S. Patton Jr. --------------050004050907060201030300 Content-Type: text/plain; charset=UTF-8; name="LIST.dmesg.Dec2015.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="LIST.dmesg.Dec2015.txt" Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xffb00000-0xffb3ffff irq 44 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x9840) HDA Controller> mem 0xffb64000-0xffb67fff irq 45 at device 1.1 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0 pci1: <ACPI PCI bus> on pcib1 ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xffa00000-0xffa001ff irq 28 at device 0.0 on pci1 ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xff900000-0xff900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: d0:50:99:13:e3:85 pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff800000-0xff807fff irq 36 at device 0.0 on pci3 xhci0: 32 byte context size. usbus0 on xhci0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xffb68000-0xffb69fff irq 18 at device 16.0 on pci0 xhci1: 32 byte context size. usbus1 on xhci1 ahci1: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xffb6e000-0xffb6e3ff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ohci0: <OHCI (generic) USB controller> mem 0xffb6d000-0xffb6dfff irq 18 at device 18.0 on pci0 usbus2 on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffb6c000-0xffb6c0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci1: <OHCI (generic) USB controller> mem 0xffb6b000-0xffb6bfff irq 18 at device 19.0 on pci0 usbus4 on ohci1 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xffb6a000-0xffb6a0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 hdac1: <Generic (0x780d1022) HDA Controller> mem 0xffb60000-0xffb63fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5 acpi_button0: <Power Button> on acpi0 ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0 ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xcf000-0xd6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x2a7 offMax=0x587 hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm3: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b21> at usbus0 uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022> at usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <AMD> at usbus2 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <AMD> at usbus3 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <AMD> at usbus4 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <AMD> at usbus5 uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada0: Serial Number JR10006PGYH08E ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada1: Serial Number JR10006PGYD6ZE ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada2: Serial Number JR10006PGYTR8E ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad8 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada3: Serial Number JR10006PGYK1YE ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad10 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 1297591135 Hz quality 1000 uhub2: 4 ports with 4 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub1: 4 ports with 4 removable, self powered GEOM_STRIPE: Device home_str created (id=3106945155). GEOM_STRIPE: Disk ada0p4 attached to home_str. GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17). GEOM_STRIPE: Device usr_str created (id=3573821994). GEOM_STRIPE: Disk ada1p3 attached to usr_str. GEOM_STRIPE: Disk ada1p4 attached to home_str. GEOM_STRIPE: Disk ada2p3 attached to usr_str. GEOM_STRIPE: Disk ada2p4 attached to home_str. GEOM_STRIPE: Disk ada3p3 attached to usr_str. GEOM_STRIPE: Device stripe/usr_str activated. GEOM_STRIPE: Disk ada3p4 attached to home_str. GEOM_STRIPE: Device stripe/home_str activated. GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). Root mount waiting for: usbus5 usbus3 uhub5: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered ugen4.2: <USB> at usbus4 ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4 kbd2 at ukbd0 ums0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4 ums0: 3 buttons and [XYZ] coordinates ID=3 Root mount waiting for: usbus3 ugen3.2: <MUSHKIN> at usbus3 umass0: <MUSHKIN MKNUFDPR4GB, class 0/0, rev 2.00/1.00, addr 2> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:4:0:-1: Attached to scbus4 Trying to mount root from ufs:/dev/ada0p3 [rw]... da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <MUSHKIN MKNUFDPR4GB PMAP> Removable Direct Access SCSI-6 device da0: Serial Number C500545DB516E726 da0: 40.000MB/s transfers da0: 3699MB (7575552 512 byte sectors: 255H 63S/T 471C) da0: quirks=0x2<NO_6_BYTE> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 fe 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 fe 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error ugen4.3: <Kensington> at usbus4 (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) (da0:umass-sim0:0:0:0): Error 22, Unretryable error ums1: <Kensington Kensington PilotMouse Laser - 6 Button, class 0/0, rev 1.10/2.20, addr 3> on usbus4 ums1: 6 buttons and [XYZT] coordinates ID=0 GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17). ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled module_register: module drmn/drm_iic_dp_aux already exists! Module drmn/drm_iic_dp_aux failed to register: 17 module_register: module drmn already exists! Module drmn failed to register: 17 KLD radeonkms_port.ko: depends on drmn_port - not available or version mismatch linker_load_file: Unsupported file type Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...8 8 2 2 2 2 1 1 1 1 0 0 0 done All buffers synced. Uptime: 8m12s usbus0: Controller shutdown uhub0: at usbus0, port 1, addr 1 (disconnected) usbus0: Controller shutdown complete usbus1: Controller shutdown uhub1: at usbus1, port 1, addr 1 (disconnected) usbus1: Controller shutdown complete usbus2: Controller shutdown uhub2: at usbus2, port 1, addr 1 (disconnected) usbus2: Controller shutdown complete usbus3: Controller shutdown uhub3: at usbus3, port 1, addr 1 (disconnected) ugen3.2: <MUSHKIN> at usbus3 (disconnected) umass0: at uhub3, port 3, addr 2 (disconnected) da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <MUSHKIN MKNUFDPR4GB PMAP> s/n C500545DB516E726 detached (da0:umass-sim0:0:0:0): Periph destroyed usbus3: Controller shutdown complete usbus4: Controller shutdown uhub4: at usbus4, port 1, addr 1 (disconnected) ugen4.2: <USB> at usbus4 (disconnected) ukbd0: at uhub4, port 3, addr 2 (disconnected) ums0: at uhub4, port 3, addr 2 (disconnected) ugen4.3: <Kensington> at usbus4 (disconnected) ums1: at uhub4, port 4, addr 3 (disconnected) usbus4: Controller shutdown complete usbus5: Controller shutdown uhub5: at usbus5, port 1, addr 1 (disconnected) Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE-p30 #0: Mon Nov 2 10:11:50 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (1297.59-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x700f01 Family = 0x16 Model = 0x0 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I> Standard Extended Features=0x8 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15910752256 (15173 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard kbd1 at kbdmux0 acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xffb00000-0xffb3ffff irq 44 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x9840) HDA Controller> mem 0xffb64000-0xffb67fff irq 45 at device 1.1 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0 pci1: <ACPI PCI bus> on pcib1 ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xffa00000-0xffa001ff irq 28 at device 0.0 on pci1 ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xff900000-0xff900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: d0:50:99:13:e3:85 pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff800000-0xff807fff irq 36 at device 0.0 on pci3 xhci0: 32 byte context size. usbus0 on xhci0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xffb68000-0xffb69fff irq 18 at device 16.0 on pci0 xhci1: 32 byte context size. usbus1 on xhci1 ahci1: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xffb6e000-0xffb6e3ff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ohci0: <OHCI (generic) USB controller> mem 0xffb6d000-0xffb6dfff irq 18 at device 18.0 on pci0 usbus2 on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffb6c000-0xffb6c0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci1: <OHCI (generic) USB controller> mem 0xffb6b000-0xffb6bfff irq 18 at device 19.0 on pci0 usbus4 on ohci1 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xffb6a000-0xffb6a0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 hdac1: <Generic (0x780d1022) HDA Controller> mem 0xffb60000-0xffb63fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5 acpi_button0: <Power Button> on acpi0 ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0 ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xcf000-0xd6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x2a6 offMax=0x6b1 hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm3: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b21> at usbus0 uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022> at usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <AMD> at usbus2 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <AMD> at usbus3 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <AMD> at usbus4 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <AMD> at usbus5 uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada0: Serial Number JR10006PGYH08E ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada1: Serial Number JR10006PGYD6ZE ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada2: Serial Number JR10006PGYTR8E ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad8 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada3: Serial Number JR10006PGYK1YE ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad10 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC" frequency 1297594000 Hz quality 1000 uhub2: 4 ports with 4 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub1: 4 ports with 4 removable, self powered uhub0: 4 ports with 4 removable, self powered GEOM_STRIPE: Device home_str created (id=3106945155). GEOM_STRIPE: Disk ada0p4 attached to home_str. GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17). GEOM_STRIPE: Device usr_str created (id=3573821994). GEOM_STRIPE: Disk ada1p3 attached to usr_str. GEOM_STRIPE: Disk ada1p4 attached to home_str. GEOM_STRIPE: Disk ada2p3 attached to usr_str. GEOM_STRIPE: Disk ada2p4 attached to home_str. GEOM_STRIPE: Disk ada3p3 attached to usr_str. GEOM_STRIPE: Device stripe/usr_str activated. GEOM_STRIPE: Disk ada3p4 attached to home_str. GEOM_STRIPE: Device stripe/home_str activated. GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). uhub5: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). Root mount waiting for: usbus5 Trying to mount root from ufs:/dev/ada0p3 [rw]... ugen4.2: <USB> at usbus4 ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4 kbd2 at ukbd0 ums0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4 ums0: 3 buttons and [XYZ] coordinates ID=3 GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). ugen4.3: <Kensington> at usbus4 ums1: <Kensington Kensington PilotMouse Laser - 6 Button, class 0/0, rev 1.10/2.20, addr 3> on usbus4 ums1: 6 buttons and [XYZT] coordinates ID=0 GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17). ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled info: [drm] Initialized drm 1.1.0 20060810 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...9 2 2 2 2 2 2 1 1 1 1 1 1 0 0 0 0 done All buffers synced. Uptime: 5m16s usbus0: Controller shutdown uhub0: at usbus0, port 1, addr 1 (disconnected) usbus0: Controller shutdown complete usbus1: Controller shutdown uhub1: at usbus1, port 1, addr 1 (disconnected) usbus1: Controller shutdown complete usbus2: Controller shutdown uhub2: at usbus2, port 1, addr 1 (disconnected) usbus2: Controller shutdown complete usbus3: Controller shutdown uhub3: at usbus3, port 1, addr 1 (disconnected) usbus3: Controller shutdown complete usbus4: Controller shutdown uhub4: at usbus4, port 1, addr 1 (disconnected) ugen4.2: <USB> at usbus4 (disconnected) ukbd0: at uhub4, port 3, addr 2 (disconnected) ums0: at uhub4, port 3, addr 2 (disconnected) ugen4.3: <Kensington> at usbus4 (disconnected) ums1: at uhub4, port 4, addr 3 (disconnected) usbus4: Controller shutdown complete usbus5: Controller shutdown uhub5: at usbus5, port 1, addr 1 (disconnected) Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE-p30 #0: Mon Nov 2 10:11:50 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (1297.59-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x700f01 Family = 0x16 Model = 0x0 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I> Standard Extended Features=0x8 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15910752256 (15173 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard kbd1 at kbdmux0 acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xffb00000-0xffb3ffff irq 44 at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ATI (0x9840) HDA Controller> mem 0xffb64000-0xffb67fff irq 45 at device 1.1 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0 pci1: <ACPI PCI bus> on pcib1 ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xffa00000-0xffa001ff irq 28 at device 0.0 on pci1 ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xff900000-0xff900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: d0:50:99:13:e3:85 pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff800000-0xff807fff irq 36 at device 0.0 on pci3 xhci0: 32 byte context size. usbus0 on xhci0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xffb68000-0xffb69fff irq 18 at device 16.0 on pci0 xhci1: 32 byte context size. usbus1 on xhci1 ahci1: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xffb6e000-0xffb6e3ff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ohci0: <OHCI (generic) USB controller> mem 0xffb6d000-0xffb6dfff irq 18 at device 18.0 on pci0 usbus2 on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffb6c000-0xffb6c0ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci1: <OHCI (generic) USB controller> mem 0xffb6b000-0xffb6bfff irq 18 at device 19.0 on pci0 usbus4 on ohci1 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xffb6a000-0xffb6a0ff irq 17 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 hdac1: <Generic (0x780d1022) HDA Controller> mem 0xffb60000-0xffb63fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5 acpi_button0: <Power Button> on acpi0 ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0 ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xcf000-0xd6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x2a6 offMax=0x6e3 hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm3: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b21> at usbus0 uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022> at usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <AMD> at usbus2 uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <AMD> at usbus3 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <AMD> at usbus4 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <AMD> at usbus5 uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada0: Serial Number JR10006PGYH08E ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada1: Serial Number JR10006PGYD6ZE ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada2: Serial Number JR10006PGYTR8E ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad8 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device ada3: Serial Number JR10006PGYK1YE ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad10 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 1297593631 Hz quality 1000 uhub4: 4 ports with 4 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub1: 4 ports with 4 removable, self powered uhub0: 4 ports with 4 removable, self powered GEOM_STRIPE: Device home_str created (id=3106945155). GEOM_STRIPE: Disk ada0p4 attached to home_str. GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17). GEOM_STRIPE: Device usr_str created (id=3573821994). GEOM_STRIPE: Disk ada1p3 attached to usr_str. GEOM_STRIPE: Disk ada1p4 attached to home_str. GEOM_STRIPE: Disk ada2p3 attached to usr_str. GEOM_STRIPE: Disk ada2p4 attached to home_str. GEOM_STRIPE: Disk ada3p3 attached to usr_str. GEOM_STRIPE: Device stripe/usr_str activated. GEOM_STRIPE: Disk ada3p4 attached to home_str. GEOM_STRIPE: Device stripe/home_str activated. GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). Root mount waiting for: usbus5 usbus3 uhub3: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered Trying to mount root from ufs:/dev/ada0p3 [rw]... ugen4.2: <USB> at usbus4 ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4 kbd2 at ukbd0 ums0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4 ums0: 3 buttons and [XYZ] coordinates ID=3 ugen4.3: <Kensington> at usbus4 ums1: <Kensington Kensington PilotMouse Laser - 6 Button, class 0/0, rev 1.10/2.20, addr 3> on usbus4 ums1: 6 buttons and [XYZT] coordinates ID=0 GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17). GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17). GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17). GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17). ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled --------------050004050907060201030300--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?566DEB4B.5050808>