Date: Fri, 19 Feb 2016 17:47:00 +0100 From: Hans Petter Selasky <hps@selasky.org> To: Andreas Longwitz <longwitz@incore.de>, freebsd-isdn@freebsd.org Subject: Re: chan_capi error after update Message-ID: <56C74704.6060606@selasky.org> In-Reply-To: <56C6E0D4.5060603@incore.de> References: <56C6E0D4.5060603@incore.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On 02/19/16 10:31, Andreas Longwitz wrote:
> Hi,
>
> isdn4bsd + chan_capi works fine for years now, thanks !!
>
> On machines running
> FreeBSD 8.4-STABLE (LOSERVER) #2 r284338
> with
> ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem
> 0xff532000-0xff5320ff irq 22 at device 1.0 on pci6
> ihfc0: [ITHREAD]
> ihfc0: Attaching I4B controller 0.
> ihfc0: Creating /dev/ihfc0.X.
> i4btel: 8 ISDN telephony interface device(s) attached
> i4btrc: 64 ISDN trace device(s) attached
> i4bctl: ISDN system control port attached
> i4b: ISDN call control device attached
> i4bisppp: 8 ISDN SyncPPP device(s) attached
>
> there is a problem after updating software (without changing configuration)
>
> asterisk18: 1.8.16.0 ---> 1.8.32.1
> chan_capi: 2.0.3 ---> 2.0.14
> libcapi: 2.0.1 ---> 2.0.2
> isdn4bsd-kmod: 2.0.7 ---> 2.0.11
> isdn4bsd-utils: 2.0.7 ---> 2.0.11
>
> isdnd works fine, but chan_capi has a problem when asterisk starts:
>
> [2016-02-18 17:16:51.477] VERBOSE[8810] chan_capi.c: [2016-02-18
> 17:16:51.477] == Reading config for ISDN
> [2016-02-18 17:16:51.477] VERBOSE[8810] chan_capi.c: [2016-02-18
> 17:16:51.477] -- config entry 'ISDN' T=(4982871,isdn-in,2) C=[0,0]
> E=(0,4,64) G=(1.000000/1.000000) H=(0)
> [2016-02-18 17:16:51.477] ERROR[8810] chan_capi.c: CAPI error sending
> CAPI_FACILITY_REQ {
> header {
> WORD wLen = 0x0000
> WORD wApp = 0xffff
> WORD wCmd = 0x8468
> WORD wNum = 0x0001
> DWORD dwCid = 0x00000000
> }
> data {
> WORD wSelector = 0x0003
> STRUCT Param.ptr = 0x03 '?', 0x00 '?', 0x00 '?', 0x00 '?'.
> }
> }
> (NCCI=0) (error=0x1101)
> [2016-02-18 17:16:51.477] NOTICE[8810] chan_capi.c: could not send
> FACILITY REQUEST!
> [2016-02-18 17:16:51.477] VERBOSE[8810] chan_capi.c: [2016-02-18
> 17:16:51.477] -- CAPI controller 0 supports: [DTMF][echo
> cancellation][supplementary]
> [2016-02-18 17:16:51.477] ERROR[8810] chan_capi.c: CAPI error sending
> CAPI_LISTEN_REQ {
> header {
> WORD wLen = 0x0000
> WORD wApp = 0xffff
> WORD wCmd = 0x8462
> WORD wNum = 0x0002
> DWORD dwCid = 0x00000000
> }
> data {
> DWORD dwInfoMask = 0x0000ffff
> DWORD dwCipMask1 = 0x1fff03ff
> DWORD dwCipMask2 = 0x00000000
> STRUCT src_telno.ptr = (empty)
> STRUCT src_subaddr.ptr = (empty)
> }
> }
> (NCCI=0) (error=0x1101)
> [2016-02-18 17:16:51.477] ERROR[8810] chan_capi.c: Unable to listen on
> controller=0!
> [2016-02-18 17:16:51.478] VERBOSE[8810] channel.c: [2016-02-18
> 17:16:51.478] == Registered channel type 'CAPI' (Common ISDN API 2.0
> Driver 2.0.14)
> [2016-02-18 17:16:51.478] VERBOSE[8810] pbx.c: [2016-02-18 17:16:51.478]
> == Registered application 'capiCommand'
> [2016-02-18 17:16:51.478] ERROR[8810] lock.c: chan_capi.c line 1237
> (capi_application_usleep): mutex '&p_app->lock' freed more times than
> we've locked!
> [2016-02-18 17:16:51.478] VERBOSE[8810] loader.c: [2016-02-18
> 17:16:51.478] chan_capi.so => (Common ISDN API 2.0 Driver 2.0.14)
> [2016-02-18 17:16:51.478] ERROR[8810] lock.c: chan_capi.c line 1237
> (capi_application_usleep): Error releasing mutex: Operation not permitted
>
> Some seconds later:
> [2016-02-18 17:16:51.527] VERBOSE[8810] asterisk.c: [2016-02-18
> 17:16:51.527] Asterisk Ready.
> [2016-02-18 17:16:53.873] VERBOSE[8810] chan_capi.c: [2016-02-18
> 17:16:53.873] -- CAPI controller 0 supports: [DTMF][echo
> cancellation][supplementary]
> [2016-02-18 17:16:55.258] VERBOSE[8810] chan_capi.c: [2016-02-18
> 17:16:55.258] -- listening on controller=0, cip_mask=0x1fff03ff
> [2016-02-18 17:16:55.258] WARNING[8810] chan_capi.c: CAPI application
> was restarted
>
> Any ideas ?
Hi,
Did you set the correct permissions for /dev/capi20. Maybe Asterisk is
running it as a different user?
--HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56C74704.6060606>