Date: Wed, 29 Mar 2017 20:14:54 -0700 From: Pete Wright <pete@nomadlogic.org> To: freebsd-wireless@freebsd.org Subject: iwm Intel 3165 Message-ID: <5b648cbd-c546-aa14-f69a-d08c9973c1d2@nomadlogic.org>
next in thread | raw e-mail | index | archive | help
Hi there,
I have a new laptop with the following Intel wireless chipset that seems
to be having problems getting enabled:
iwm0@pci0:1:0:0: class=0x028000 card=0x44108086 chip=0x31658086
rev=0x79 hdr=0x00
vendor = 'Intel Corporation'
device = 'Wireless 3165'
class = network
I have the following configured in my loader.conf:
if_iwm_load="YES"
iwm3160fw_load="YES"
iwm7260fw_load="YES"
iwm7265fw_load="YES"
iwm8000Cfw_load="YES"
I have seen the following error on both the latest 12-CURRENT snapshot
as well as the drm-next branch that work is being done on to support
newer Intel graphics and can reproduce on both code bases. Here is what
I'm seeing in the dmesg buffer:
iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0xd1000000-0xd1001fff at
device 0.0 on pci1
iwm7265Dfw: root not mounted yet, no way to load image
iwm0: could not read firmware iwm7265Dfw (error 0)
iwm0: dumping device error log
iwm0: Invalid error log pointer 0x00000000
iwm0: driver status:
iwm0: tx ring 0: qid=0 cur=0 queued=0
iwm0: tx ring 1: qid=1 cur=0 queued=0
iwm0: tx ring 2: qid=2 cur=0 queued=0
iwm0: tx ring 3: qid=3 cur=0 queued=0
uhub0: iwm0: tx ring 4: qid=4 cur=0 queued=0
iwm0: tx ring 5: qid=5 cur=0 queued=0
iwm0: tx ring 6: qid=6 cur=0 queued=0
iwm0: tx ring 7: qid=7 cur=0 queued=0
iwm0: tx ring 8: qid=8 cur=0 queued=0
iwm0: tx ring 9: qid=9 cur=0 queued=0
iwm0: tx ring 10: qid=10 cur=0 queued=0
iwm0: tx ring 11: qid=11 cur=0 queued=0
iwm0: tx ring 12: qid=12 cur=0 queued=0
iwm0: tx ring 13: qid=13 cur=0 queued=0
iwm0: tx ring 14: qid=14 cur=0 queued=0
iwm0: tx ring 15: qid=15 cur=0 queued=0
iwm0: tx ring 16: qid=16 cur=0 queued=0
iwm0: tx ring 17: qid=17 cur=0 queued=0
iwm0: tx ring 18: qid=18 cur=0 queued=0
iwm0: tx ring 19: qid=19 cur=0 queued=0
iwm0: tx ring 20: qid=20 cur=0 queued=0
iwm0: tx ring 21: qid=21 cur=0 queued=0
iwm0: tx ring 22: qid=22 cur=0 queued=0
iwm0: tx ring 23: qid=23 cur=0 queued=0
iwm0: tx ring 24: qid=24 cur=0 queued=0
iwm0: tx ring 25: qid=25 cur=0 queued=0
iwm0: tx ring 26: qid=26 cur=0 queued=0
iwm0: tx ring 27: qid=27 cur=0 queued=0
iwm0: tx ring 28: qid=28 cur=0 queued=0
iwm0: tx ring 29: qid=29 cur=0 queued=0
iwm0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
iwm0: rx ring: cur=0
iwm0: 802.11 state -1
iwm_intr: null vap
iwm0: Failed to start INIT ucode: 35
When i try to configure the device the netif rc script errors out
stating the device doesn't exist.
Let me know if any additional debugging info would be helpful, and if
this is a real issue I am def willing to help test patches etc.
Cheers!
-pete
--
Pete Wright
pete@nomadlogic.org
@nomadlogicLA
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5b648cbd-c546-aa14-f69a-d08c9973c1d2>