Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Apr 2019 12:08:54 +0200
From:      Jakob Alvermark <jakob@alvermark.net>
To:        Johannes Lundberg <johalun0@gmail.com>, x11@freebsd.org
Subject:   Re: drm-current-kmod-4.16.g20190424 hangs
Message-ID:  <5eab5bae-fd3c-0839-9d93-a8b7a4096f6d@alvermark.net>
In-Reply-To: <8dcf1fed-8f89-3e11-5fe1-b3a72e6971b0@alvermark.net>
References:  <5713985b-e97f-c7f2-2592-47a17baf8095@alvermark.net> <12e450ab-2c17-11e3-ba47-20599c38f3a3@gmail.com> <8dcf1fed-8f89-3e11-5fe1-b3a72e6971b0@alvermark.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,


I upgraded -current to r346883 (and rebuilt drm-current-kmod)

I still get the "GPU HANG".

It seems very random, sometimes it hangs after only a couple of minutes 
after starting Xorg, other times it has been running an hour or more 
until "GPU HANG"

I can still ssh into the machine, so I can reboot it.


Jakob

On 2019-04-27 13:19, Jakob Alvermark wrote:
> Yes, here it is:
>
> ---<<BOOT>>---
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT #194 r346736M: Fri Apr 26 12:26:20 CEST 2019
>     root@flyer:/usr/obj/usr/src/amd64.amd64/sys/FLYER amd64
> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on 
> LLVM 8.0.0)
> VT(efifb): resolution 1366x768
> CPU: Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz (2166.72-MHz K8-class CPU)
>   Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37 Stepping=8
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> 
>
> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> 
>
>   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>   AMD Features2=0x101<LAHF,Prefetch>
>   Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
>   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
>   TSC: P-state invariant, performance statistics
> real memory  = 8589934592 (8192 MB)
> avail memory = 8120422400 (7744 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <ACRSYS ACRPRDCT>
> WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s)
> __stack_chk_init: WARNING: Initializing stack protection with 
> non-random cookies!
> __stack_chk_init: WARNING: This severely limits the benefit of 
> -fstack-protector!
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-86 on motherboard
> Launching APs: 2 3 1
> Timecounter "TSC-low" frequency 1083359667 Hz quality 1000
> Cuse v0.1.36 @ /dev/cuse
> random: entropy device external interface
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (vesa, 0xffffffff81150570, 0) error 19
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> 000.000049 [4254] netmap_init               netmap: loaded module
> [ath_hal] loaded
> nexus0
> efirtc0: <EFI Realtime Clock> on motherboard
> efirtc0: registered as a time-of-day clock, resolution 1.000000s
> cryptosoft0: <software crypto> on motherboard
> acpi0: <ACRSYS ACRPRDCT> on motherboard
> acpi0: Power Button (fixed)
> unknown: I/O range not supported
> cpu0: <ACPI CPU> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 
> on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pcib0: Length mismatch for 3 range: 109fffff vs 10a00000
> pci0: <ACPI PCI bus> on pcib0
> vgapci0: <VGA-compatible display> port 0x2050-0x2057 mem 
> 0x90000000-0x903fffff,0x80000000-0x8fffffff at device 2.0 on pci0
> vgapci0: Boot video device
> ahci0: <AHCI SATA controller> port 
> 0x2048-0x204f,0x205c-0x205f,0x2040-0x2047,0x2058-0x205b,0x2020-0x203f 
> mem 0x9091e000-0x9091e7ff at device 19.0 on pci0
> ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> xhci0: <Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff 
> at device 20.0 on pci0
> xhci0: 32 bytes context size, 64-bit DMA
> xhci0: Port routing mask set to 0xffffffff
> usbus0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
> hdac0: <Intel BayTrail HDA Controller> mem 0x90910000-0x90913fff at 
> device 27.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pcib1: [GIANT-LOCKED]
> pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
> pcib2: [GIANT-LOCKED]
> pci1: <ACPI PCI bus> on pcib2
> iwn0: <Intel Centrino Advanced 6235> mem 0x90600000-0x90601fff at 
> device 0.0 on pci1
> arc4random: WARNING: initial seeding bypassed the cryptographic random 
> device because it was not yet seeded and the knob 
> 'bypass_before_seeding' was enabled.
> pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
> pcib3: [GIANT-LOCKED]
> pci2: <ACPI PCI bus> on pcib3
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 
> 0x1000-0x10ff mem 0x90500000-0x90500fff,0x90400000-0x90403fff at 
> device 0.0 on pci2
> re0: Using 1 MSI-X message
> re0: ASPM disabled
> re0: Chip rev. 0x4c000000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 
> 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, 
> auto, auto-flow
> re0: Using defaults for TSO: 65518/35/2048
> re0: Ethernet address: c4:54:44:d6:95:39
> re0: netmap queues/slots: TX 1/256, RX 1/256
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> gpio0: <Intel Baytrail GPIO Controller> iomem 0xfed0c000-0xfed0cfff 
> irq 49 on acpi0
> gpiobus0: <GPIO bus> on gpio0
> gpioc0: <GPIO controller> on gpio0
> gpio1: <Intel Baytrail GPIO Controller> iomem 0xfed0d000-0xfed0dfff 
> irq 48 on acpi0
> gpiobus1: <GPIO bus> on gpio1
> gpioc1: <GPIO controller> on gpio1
> gpio2: <Intel Baytrail GPIO Controller> iomem 0xfed0e000-0xfed0efff 
> irq 50 on acpi0
> gpiobus2: <GPIO bus> on gpio2
> gpioc2: <GPIO controller> on gpio2
> sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> 
> iomem 0x90a02000-0x90a02fff irq 44 on acpi0
> mmc0: <MMC/SD bus> on sdhci_acpi0
> sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 
> 0x90a00000-0x90a00fff irq 47 on acpi0
> ig4iic_acpi0: <Designware I2C Controller> iomem 0x90a07000-0x90a07fff 
> irq 32 on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Synaptics Touchpad, device ID 0
> uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0
> hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0
> hdaa0: Coef 0x06 val 0x2100 -> 0x2100
> hdaa0: Coef 0x45 val 0xc429 -> 0xd429
> hdaa0: Coef 0x1b val 0x080b -> 0x0c2b
> hdaa0: Coef 0x32 val 0x4ea3 -> 0x4ea3
> pcm0: <Realtek ALC283 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0
> hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0
> hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1
> pcm1: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1
> ugen0.1: <0x8086 XHCI root HUB> at usbus0
> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <SAMSUNG MZ7PD128HCFV-000H1 DXM01H0Q> ACS-2 ATA SATA 3.x device
> ada0: Serial Number S1MBNSAFA22012
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 122104MB (250069680 512 byte sectors)
> ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
> mmc0: No compatible cards found on bus
> iicbus0: <Philips I2C bus> on ig4iic_acpi0
> iicsmb0: <SMBus over I2C bridge> on iicbus0
> smbus0: <System Management Bus> on iicsmb0
> Trying to mount root from zfs:flyer2/ROOT/default []...
> Root mount waiting for: usbus0
> uhub0: 7 ports with 7 removable, self powered
> Root mount waiting for: usbus0
> ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
> uhub1 on uhub0
> uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> 
> on usbus0
> uhub1: 4 ports with 3 removable, self powered
> Root mount waiting for: usbus0
> ugen0.3: <vendor 0x8087 product 0x07da> at usbus0
> Root mount waiting for: usbus0
> ugen0.4: <Cisco-Linksys Compact Wireless-G USB Adapter> at usbus0
> ugen0.5: <SunplusIT INC. HD WebCam> at usbus0
> random: unblocking device.
> [drm:drm_core_init] Initialized
> drmn0: <drmn> on vgapci0
> vgapci0: child drmn0 requested pci_enable_io
> [drm:intel_detect_pch] No PCH found.
> [drm:get_allowed_dc_mask] Allowed DC state mask 00
> [drm] Unable to create a private tmpfs mount, hugepage support will be 
> disabled(-19).
> [drm:gen6_check_for_fifo_debug] GTFIFODBG = 0x0810
> [drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore 
> init, clearing
> [drm:intel_sanitize_options] ppgtt mode: 1
> [drm:intel_uc_sanitize_options] enable_guc=0 (submission:no huc:no)
> [drm:i915_ggtt_probe_hw] GGTT size = 2048M
> [drm:i915_ggtt_probe_hw] GMADR size = 256M
> [drm:i915_ggtt_probe_hw] DSM size = 64M
> Successfully added WC MTRR for [0x80000000-0x8fffffff]: 0;
> [drm] Got stolen memory base 0x7b000000, size 0x4000000
> [drm:i915_gem_init_stolen] Memory reserved for graphics device: 
> 65536K, usable: 65536K
> [drm:intel_opregion_setup] graphic opregion physical addr: 0x7885f018
> [drm:intel_opregion_setup] Public ACPI methods supported
> [drm:intel_opregion_setup] ASLE supported
> [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] Driver supports precise vblank timestamp query.
> [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
> [drm:intel_bios_init] VBT signature "$VBT VALLEYVIEW    ", BDB version 
> 181
> [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 
> int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 
> display_clock_mode 0 fdi_rx_polarity_inverted 0
> [drm:parse_general_definitions] crt_ddc_bus_pin: 2
> [drm:intel_opregion_get_panel_type] Failed to get panel details from 
> OpRegion (-19)
> [drm:parse_lfp_panel_data] Panel type: 12 (VBT)
> [drm:parse_lfp_panel_data] DRRS supported mode is static
> [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 
> 1048 1184 1344 768 771 777 806 0x8 0xa
> [drm:parse_lfp_panel_data] VBT initial LVDS value 0
> [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 500 
> Hz, active high, min brightness 20, level 255, controller 0
> [drm:parse_driver_features] DRRS State Enabled:1
> [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
> [drm:intel_update_rawclk] rawclk rate: 200000 kHz
> [drm:intel_power_well_enable] enabling always-on
> [drm:intel_power_well_enable] enabling display
> [drm:intel_power_well_enable] enabling dpio-tx-b-01
> [drm:intel_power_well_enable] enabling dpio-tx-b-23
> [drm:intel_power_well_enable] enabling dpio-tx-c-01
> [drm:intel_power_well_enable] enabling dpio-tx-c-23
> [drm:intel_power_well_enable] enabling dpio-common
> [drm:drm_irq_install] irq=65535
> [drm:intel_fbc_init] Sanitized enable_fbc value: 0
> [drm:intel_modeset_init] 2 display pipes available.
> [drm:intel_update_czclk] CZ clock rate: 333333 kHz
> [drm:intel_dump_cdclk_state] Current CDCLK 333333 kHz, VCO 2000000 
> kHz, ref 0 kHz, voltage level 2
> [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
> [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
> [drm] Connector VGA-1: get mode from tunables:
> [drm]   - kern.vt.fb.modes.VGA-1
> [drm]   - kern.vt.fb.default_mode
> [drm:intel_crt_reset] crt adpa set to 0xf40000
> [drm:intel_dp_init_connector] Adding DP connector on port B
> [drm] Connector DP-1: get mode from tunables:
> [drm]   - kern.vt.fb.modes.DP-1
> [drm]   - kern.vt.fb.default_mode
> [drm:intel_aux_port] using AUX B for port B (platform default)
> [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
> [drm] Connector HDMI-A-1: get mode from tunables:
> [drm]   - kern.vt.fb.modes.HDMI-A-1
> [drm]   - kern.vt.fb.default_mode
> [drm:intel_hdmi_ddc_pin] Using DDC pin 0x5 for port B (platform default)
> [drm:intel_dp_init_connector] Adding eDP connector on port C
> [drm] Connector eDP-1: get mode from tunables:
> [drm]   - kern.vt.fb.modes.eDP-1
> [drm]   - kern.vt.fb.default_mode
> [drm:intel_aux_port] using AUX C for port C (platform default)
> [drm:vlv_initial_power_sequencer_setup] initial power sequencer for 
> port C: pipe A
> [drm:intel_pps_dump_state] cur t1_t3 2600 t8 300 t9 2600 t10 500 
> t11_t12 6000
> [drm:intel_pps_dump_state] vbt t1_t3 2600 t8 300 t9 2600 t10 500 
> t11_t12 6000
> [drm:intel_dp_init_panel_power_sequencer] panel power up delay 260, 
> power down delay 50, power cycle delay 600
> [drm:intel_dp_init_panel_power_sequencer] backlight on delay 30, off 
> delay 260
> [drm:intel_dp_init_panel_power_sequencer_registers] panel power 
> sequencer register settings: PP_ON 0x8a280001, PP_OFF 0x1f40001, 
> PP_DIV 0x270f06
> [drm:edp_panel_vdd_on] Turning eDP port C VDD on
> [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d
> [drm:intel_dp_read_dpcd] DPCD: fffff8000ecd3133h
> [drm:drm_dp_read_desc] DP sink: OUI fffff8000ecd31bchD dev-ID 
> 0xfffff8000ecd31bfE HW-rev 0.0 SW-rev 0.0 quirks 0x0000
> [drm:intel_edp_init_dpcd] eDP DPCD: fffff8000ecd3154h
> [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [drm:drm_add_display_info] non_desktop set to 0
> [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink 
> color depth as 6 bpc.
> [drm:drm_add_display_info] non_desktop set to 0
> [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink 
> color depth as 6 bpc.
> [drm:intel_dp_drrs_init] VBT doesn't support DRRS
> [drm:intel_edp_init_connector] using pipe A for initial backlight setup
> [drm:intel_panel_setup_backlight] Connector eDP-1 backlight 
> initialized, enabled, brightness 3125/3125
> [drm:intel_dsi_init]
> [drm:intel_set_plane_visible] pipe A active planes 0x1
> [drm:intel_modeset_readout_hw_state] [CRTC:40:pipe A] hw state 
> readout: enabled
> [drm:intel_set_plane_visible] pipe B active planes 0x0
> [drm:intel_modeset_readout_hw_state] [CRTC:53:pipe B] hw state 
> readout: disabled
> [drm:intel_modeset_readout_hw_state] [ENCODER:55:CRT] hw state 
> readout: disabled, pipe A
> [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP B] hw state 
> readout: disabled, pipe A
> [drm:intel_modeset_readout_hw_state] [ENCODER:60:HDMI B] hw state 
> readout: disabled, pipe A
> [drm:intel_modeset_readout_hw_state] [ENCODER:63:DP C] hw state 
> readout: enabled, pipe A
> [drm:intel_modeset_readout_hw_state] [CONNECTOR:64:eDP-1] hw state 
> readout: enabled
> [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:VGA-1] hw state 
> readout: disabled
> [drm:intel_modeset_readout_hw_state] [CONNECTOR:57:DP-1] hw state 
> readout: disabled
> [drm:intel_modeset_readout_hw_state] [CONNECTOR:61:HDMI-A-1] hw state 
> readout: disabled
> [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1366x768] for CRTC state 
> 0xfffff8000ecc4800
> [drm:drm_calc_timestamping_constants] crtc 40: hwmode: htotal 1592, 
> vtotal 798, vdisplay 768
> [drm:drm_calc_timestamping_constants] crtc 40: clock 76299 kHz 
> framedur 16650493 linedur 20865
> [drm:drm_crtc_vblank_on] crtc 0, vblank enabled 0, inmodeset 1
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,257)@ 
> 7.731900 -> 7.726537 [e 0 us, 0 rep]
> [drm:intel_dump_pipe_config] [CRTC:40:pipe A][setup_hw_state]
> [drm:intel_dump_pipe_config] output_types: EDP (0x100)
> [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, 
> dithering: 0
> [drm:intel_dump_m_n_config] dp m_n: lanes: 1; gmch_m: 5333756, gmch_n: 
> 8388608, link_m: 148159, link_n: 524288, tu: 64
> [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
> [drm:intel_dump_pipe_config] requested mode:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76299 1366 
> 1404 1426 1592 768 771 777 798 0x40 0xa
> [drm:intel_dump_pipe_config] adjusted mode:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76299 1366 
> 1404 1426 1592 768 771 777 798 0x40 0xa
> [drm:intel_dump_crtc_timings] crtc timings: 76299 1366 1404 1426 1592 
> 768 771 777 798, type: 0x40 flags: 0xa
> [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 
> 1366x768, pixel rate 76299
> [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 
> 0x00000000, lvds border: 0x00000000
> [drm:intel_dump_pipe_config] ips: 0, double wide: 0
> [drm:intel_dpll_dump_hw_state] dpll_hw_state: dpll: 0xf0002000, 
> dpll_md: 0x3, fp0: 0x0, fp1: 0x0
> [drm:intel_dump_pipe_config] planes on this crtc
> [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:34:sprite B] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:37:cursor A] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [CRTC:53:pipe B][setup_hw_state]
> [drm:intel_dump_pipe_config] output_types:  (0x0)
> [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
> [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
> [drm:intel_dump_pipe_config] requested mode:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 
> 0x0 0x0
> [drm:intel_dump_pipe_config] adjusted mode:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 
> 0x0 0x0
> [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 
> 0x0 flags: 0x0
> [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel 
> rate 0
> [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 
> 0x00000000, lvds border: 0x00000000
> [drm:intel_dump_pipe_config] ips: 0, double wide: 0
> [drm:intel_dpll_dump_hw_state] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, 
> fp0: 0x0, fp1: 0x0
> [drm:intel_dump_pipe_config] planes on this crtc
> [drm:intel_dump_pipe_config] [PLANE:41:primary B] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:44:sprite C] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:47:sprite D] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:50:cursor B] disabled, scaler_id = 0
> [drm:drm_mode_object_get] OBJ ID: 64 (2)
> [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, 
> cursor=15, sprite0=15, sprite1=15
> [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, 
> cursor=15, sprite0=15, sprite1=15
> [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR 
> cursor=0 level=0 cxsr=1
> [drm:i9xx_get_initial_plane_config] pipe A/primary A with fb: 
> size=1366x768@32, offset=0, pitch 5504, size 0x408000
> [drm:i915_gem_object_create_stolen_for_preallocated] creating 
> preallocated stolen object: stolen_offset=0xfffffe0053aa3390a, 
> gtt_offset=0xfffffe0053aa3398a, size=0xfffffe0053aa33a0a
> [drm:intel_alloc_initial_plane_obj] initial plane fb obj 
> 0xfffff8000ecda600
> [drm:drm_mode_object_get] OBJ ID: 70 (1)
> [drm:intel_set_plane_visible] pipe A active planes 0x1
> [drm:i915_gem_init_ggtt] clearing unused GTT space: [409000, 80000000]
> [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fe00
> [drm:gen6_ppgtt_init] Adding PPGTT at offset 7fe00000
> [drm:i915_gem_contexts_init] logical context support initialized
> [drm:init_status_page] rcs0 hws offset: 0x00409000
> [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fdfd000
> [drm:init_status_page] bcs0 hws offset: 0x0042a000
> [drm:init_status_page] vcs0 hws offset: 0x0044b000
> [drm:i915_gem_object_create_stolen_for_preallocated] creating 
> preallocated stolen object: stolen_offset=0xfffffe0053aa33e0a, 
> gtt_offset=0xfffffe0053aa33e8a, size=0xfffffe0053aa33f0a
> [drm:valleyview_setup_pctx] PCBR: 0x7eefa001
> [drm:vlv_init_gpll_ref_freq] GPLL reference freq: 20833 kHz
> [drm:valleyview_init_gt_powersave] DDR speed: 1333 MHz
> [drm:valleyview_init_gt_powersave] max GPU freq: 896 MHz (226)
> [drm:valleyview_init_gt_powersave] RPe GPU freq: 646 MHz (214)
> [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: 312 MHz (198)
> [drm:valleyview_init_gt_powersave] min GPU freq: 187 MHz (192)
> [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0
> [drm:valleyview_enable_rps] GPLL enabled? yes
> [drm:valleyview_enable_rps] GPU status: 0x0000c6d0
> [drm:intel_fbdev_init_bios] found possible fb from plane A
> [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
> [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
> [drm:intel_fbdev_init_bios] pipe A area: 1366x768, bpp: 32, size: 4227072
> [drm:intel_fbdev_init_bios] fb big enough for plane A (4227072 >= 
> 4227072)
> [drm:intel_fbdev_init_bios] pipe B not active, skipping
> [drm:drm_mode_object_get] OBJ ID: 70 (2)
> [drm:intel_fbdev_init_bios] using BIOS fb for initial console
> [drm:drm_mode_object_get] OBJ ID: 64 (3)
> [drm:drm_mode_object_get] OBJ ID: 54 (2)
> [drm:drm_mode_object_get] OBJ ID: 57 (2)
> [drm:drm_mode_object_get] OBJ ID: 61 (2)
> [drm:drm_minor_register]
> [drm:drm_minor_register] new minor registered 128
> [drm:drm_minor_register]
> [drm:drm_minor_register] new minor registered 0
> [drm:drm_sysfs_connector_add] adding "eDP-1" to sysfs
> [drm:drm_sysfs_hotplug_event] generating hotplug event
> [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs 
> interface registered
> [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-eDP-1
> [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-C] 
> registered as minor 0
> [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
> [drm:drm_sysfs_hotplug_event] generating hotplug event
> [drm:drm_sysfs_connector_add] adding "DP-1" to sysfs
> [drm:drm_sysfs_hotplug_event] generating hotplug event
> [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1
> [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-B] 
> registered as minor 1
> [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> [drm:drm_sysfs_hotplug_event] generating hotplug event
> [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0
> [drm:intel_didl_outputs] 4 outputs detected
> i915 device info: 0xfffffe0053aa3470V
> [drm:drm_setup_crtcs]
> i915 device info: 0xfffffe0053aa3480V
>
> i915 device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 
> device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480V
> [drm:drm_helper_probe_single_connector_modes]
> i915 device info: 0xfffffe0053aa3480V
> [CONNECTOR:64:eDP-1]
> [drm:intel_dp_detect] [CONNECTOR:64:eDP-1]
> i915 device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 
> device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480V
> [drm:intel_dp_print_rates]
> i915 device info: 0xfffffe0053aa3480V
> source rates: 162000, 270000
> i915 device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 
> device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480V
> [drm:intel_dp_print_rates] sink rates: 162000, 270000
> [drm:intel_dp_print_rates]
> i915 device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa34b0Vi915 
> device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480V
> common rates: 162000, 270000
> i915 device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 
> device info: 0xfffffe0053aa3480Vi915 device info: 
> 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device 
> info: 0xfffffe0053aa34b0V
> [drm:drm_dp_read_desc] DP sink: OUI fffff8000ecd31bchD dev-ID 
> 0xfffff8000ecd31bfE HW-rev 0.0 SW-rev 0.0 quirks 0x0000
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:eDP-1] 
> status updated from unknown to connected
> [drm:drm_add_display_info] non_desktop set to 0
> [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink 
> color depth as 6 bpc.
> [drm:drm_sysfs_hotplug_event] [drm:drm_mode_object_put] generating 
> hotplug event
> OBJ ID: 66 (1)
> [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [drm:drm_add_display_info] non_desktop set to 0
> [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink 
> color depth as 6 bpc.
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:eDP-1] 
> probed modes :
> [drm:drm_mode_debug_printmodeline] Modeline 65:"1366x768" 60 76300 
> 1366 1404 1426 1592 768 771 777 798 0x48 0xa
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:VGA-1]
> [drm:intel_crt_detect] [CONNECTOR:54:VGA-1] force=1
> [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: 
> adpa=0xf40000
> [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, 
> result 0
> [drm:intel_crt_detect] CRT not detected via hotplug
> ichwd0: <Intel Bay Trail SoC watchdog timer> on isa0
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] timed out, falling back to 
> bit banging on pin 2
> [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 
> gmbus vga
> [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO 
> bit-banging
> [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. 
> force bit now 1
> [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 
> gmbus vga
> [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. 
> force bit now 0
> [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid 
> EDID found]
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:VGA-1] 
> status updated from unknown to disconnected
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:VGA-1] 
> disconnected
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:DP-1]
> [drm:intel_dp_detect] [CONNECTOR:57:DP-1]
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:DP-1] 
> status updated from unknown to disconnected
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:DP-1] 
> disconnected
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:HDMI-A-1]
> [drm:intel_hdmi_detect] [CONNECTOR:61:HDMI-A-1]
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
> [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 
> gmbus dpb
> [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using 
> GPIO bit-banging
> [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. 
> force bit now 1
> [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 
> gmbus dpb
> [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. 
> force bit now 0
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
> [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
> [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: 
> 0xfffffe0053ae27e0E (err -6)
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:HDMI-A-1] 
> status updated from unknown to disconnected
> [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:HDMI-A-1] 
> disconnected
> [drm:drm_enable_connectors] connector 64 enabled? yes
> [drm:drm_enable_connectors] connector 54 enabled? no
> [drm:drm_enable_connectors] connector 57 enabled? no
> [drm:drm_enable_connectors] connector 61 enabled? no
> [drm:intel_fb_initial_config] Not using firmware configuration
> [drm:drm_target_preferred] looking for cmdline mode on connector 64
> [drm:drm_target_preferred] looking for preferred mode on connector 64 0
> [drm:drm_target_preferred] found mode 1366x768
> [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
> [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 40 (0,0)
> [drm:drm_mode_object_get] OBJ ID: 64 (3)
> [drm:intelfb_create] re-using BIOS fb
> [drm:intelfb_create] allocated 1366x768 fb: 0x00000000
> VT: Replacing driver "efifb" with new "fb".
> [drm:drm_atomic_state_init] Allocated atomic state 0xfffff80004d04000
> [drm:drm_mode_object_get] OBJ ID: 70 (3)
> [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 
> 0xfffff80004cffa00 state to 0xfffff80004d04000
> [drm:drm_mode_object_get] OBJ ID: 69 (1)
> [drm:drm_atomic_get_crtc_state] Added [CRTC:40:pipe A] 
> 0xfffff8000ea5b000 state to 0xfffff80004d04000
> [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 
> 0xfffff80004cff900 state to 0xfffff80004d04000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff900 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff900
> [drm:drm_atomic_get_plane_state] Added [PLANE:34:sprite B] 
> 0xfffff80004cff800 state to 0xfffff80004d04000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff800 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff800
> [drm:drm_atomic_get_plane_state] Added [PLANE:37:cursor A] 
> 0xfffff80004cff700 state to 0xfffff80004d04000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff700 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff700
> [drm:drm_atomic_get_plane_state] Added [PLANE:41:primary B] 
> 0xfffff80004cff600 state to 0xfffff80004d04000
> [drm:drm_atomic_get_plane_state] Added [PLANE:44:sprite C] 
> 0xfffff80004cff500 state to 0xfffff80004d04000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff500 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff500
> [drm:drm_atomic_get_plane_state] Added [PLANE:47:sprite D] 
> 0xfffff80004cff400 state to 0xfffff80004d04000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff400 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff400
> [drm:drm_atomic_get_plane_state] Added [PLANE:50:cursor B] 
> 0xfffff80004cff300 state to 0xfffff80004d04000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff300 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff300
> [drm:drm_mode_object_put] OBJ ID: 69 (2)
> [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1366x768] for CRTC state 
> 0xfffff8000ea5b000
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cffa00 to [CRTC:40:pipe A]
> [drm:drm_atomic_set_fb_for_plane] Set [FB:70] for plane state 
> 0xfffff80004cffa00
> [drm:drm_mode_object_get] OBJ ID: 70 (4)
> [drm:drm_mode_object_put] OBJ ID: 70 (5)
> [drm:drm_atomic_add_affected_connectors] Adding all current connectors 
> for [CRTC:40:pipe A] to 0xfffff80004d04000
> [drm:drm_mode_object_get] OBJ ID: 64 (5)
> [drm:drm_mode_object_get] OBJ ID: 64 (6)
> [drm:drm_atomic_get_connector_state] Added [CONNECTOR:64:eDP-1] 
> 0xfffff80004d99a00 state to 0xfffff80004d04000
> [drm:drm_mode_object_put] OBJ ID: 64 (6)
> [drm:drm_atomic_set_crtc_for_connector] Link connector state 
> 0xfffff80004d99a00 to [NOCRTC]
> [drm:drm_mode_object_get] OBJ ID: 64 (5)
> [drm:drm_atomic_set_crtc_for_connector] Link connector state 
> 0xfffff80004d99a00 to [CRTC:40:pipe A]
> [drm:drm_atomic_get_crtc_state] Added [CRTC:53:pipe B] 
> 0xfffff8000eccb800 state to 0xfffff80004d04000
> [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 
> 0xfffff8000eccb800
> [drm:drm_atomic_set_crtc_for_plane] Link plane state 
> 0xfffff80004cff600 to [NOCRTC]
> [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 
> 0xfffff80004cff600
> [drm:drm_atomic_add_affected_connectors] Adding all current connectors 
> for [CRTC:53:pipe B] to 0xfffff80004d04000
> [drm:drm_atomic_check_only] checking 0xfffff80004d04000
> [drm:update_connector_routing] Updating routing for [CONNECTOR:64:eDP-1]
> [drm:update_connector_routing] [CONNECTOR:64:eDP-1] keeps 
> [ENCODER:63:DP C], now on [CRTC:40:pipe A]
> [drm:drm_atomic_add_affected_connectors] Adding all current connectors 
> for [CRTC:40:pipe A] to 0xfffff80004d04000
> [drm:connected_sink_compute_bpp] [CONNECTOR:64:eDP-1] checking for 
> sink bpp constrains
> [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID 
> reported max of 18
> [drm:drm_mode_debug_printmodeline] Modeline 67:"1366x768" 60 76300 
> 1366 1404 1426 1592 768 771 777 798 0x48 0xa
> [drm:intel_dp_compute_config] DP link computation with max lane count 
> 1 max bw 270000 pixel clock 76300KHz
> [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 
> 1 clock 270000 bpp 18
> [drm:intel_dp_compute_config] DP link bw required 171675 available 270000
> [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, 
> dithering: 1
> [drm:intel_dump_pipe_config] [CRTC:40:pipe A][modeset]
> [drm:intel_dump_pipe_config] output_types: EDP (0x100)
> [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, 
> dithering: 1
> [drm:intel_dump_m_n_config] dp m_n: lanes: 1; gmch_m: 2666878, gmch_n: 
> 4194304, link_m: 148159, link_n: 524288, tu: 64
> [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
> [drm:intel_dump_pipe_config] requested mode:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 
> 1404 1426 1592 768 771 777 798 0x48 0xa
> [drm:intel_dump_pipe_config] adjusted mode:
> [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 
> 1404 1426 1592 768 771 777 798 0x48 0xa
> [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1404 1426 1592 
> 768 771 777 798, type: 0x48 flags: 0xa
> [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 
> 1366x768, pixel rate 76300
> [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 
> 0x00000000, lvds border: 0x00000000
> [drm:intel_dump_pipe_config] ips: 0, double wide: 0
> [drm:intel_dpll_dump_hw_state] dpll_hw_state: dpll: 0xf0002000, 
> dpll_md: 0x3, fp0: 0x0, fp1: 0x0
> [drm:intel_dump_pipe_config] planes on this crtc
> [drm:intel_dump_pipe_config] [PLANE:28:primary A] FB:70, fb = 1366x768 
> format = XR24 little-endian (0x34325258)
> [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:34:sprite B] disabled, scaler_id = 0
> [drm:intel_dump_pipe_config] [PLANE:37:cursor A] disabled, scaler_id = 0
> [drm:intel_modeset_checks] New cdclk calculated to be logical 266667 
> kHz, actual 266667 kHz
> [drm:intel_modeset_checks] New voltage level calculated to be logical 
> 1, actual 1
> [drm:intel_plane_atomic_calc_changes] [CRTC:40:pipe A] has 
> [PLANE:28:primary A] with fb 70
> [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 
> -> 1, off 1, on 1, ms 1
> [drm:vlv_raw_plane_wm_compute] primary A watermarks: PM2=86, PM5=0, 
> DDR DVFS=0
> [drm:drm_atomic_commit] committing 0xfffff80004d04000
> [drm:_intel_set_memory_cxsr] memory self-refresh is disabled (was 
> enabled)
> [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,85)@ 
> 7.844901 -> 7.843127 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=1, diff=7, hw=1097 hw_last=1090
> start FB_INFO:
> type=11 height=768 width=1366 depth=32
> cmsize=16 size=4227072
> pbase=0x80000000 vbase=0xfffff80080000000
> name=drmn0 flags=0x0 stride=5504 bpp=32
> cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
> end FB_INFO
> drmn0: fb0: inteldrmfb frame buffer device
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 
> 7.860025 -> 7.860651 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=8, diff=1, hw=1098 hw_last=1097
> [drm:intel_edp_backlight_off]
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 
> 7.876713 -> 7.877339 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=9, diff=1, hw=1099 hw_last=1098
> [drm:vblank_disable_fn] disabling vblank on crtc 0
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-26)@ 
> 7.876713 -> 7.877256 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=10, diff=0, hw=1099 hw_last=1099
> wlan0: Ethernet address: 80:00:0b:5a:cd:23
> [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
> [drm:edp_panel_off] Turn eDP port C panel power off
> [drm:wait_panel_off] Wait for panel power off time
> [drm:wait_panel_status] mask b0000000 value 00000000 status c0000008 
> control abcd0000
> lo0: link state changed to UP
> [drm:wait_panel_status] Wait complete
> [drm:drm_crtc_vblank_off] crtc 0, vblank enabled 0, inmodeset 0
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,144)@ 
> 8.163899 -> 8.160894 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=10, diff=17, hw=1116 hw_last=1099
> [drm:intel_disable_pipe] disabling pipe A
> [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 
> 0x00100000, pins 0x00000040
> [drm:intel_hpd_irq_handler] digital hpd port C - long
> [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0
> [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
> [drm:intel_dp_link_down]
> [drm:drm_calc_timestamping_constants] crtc 40: hwmode: htotal 1592, 
> vtotal 798, vdisplay 768
> [drm:drm_calc_timestamping_constants] crtc 40: clock 76300 kHz 
> framedur 16650275 linedur 20865
> [drm:intel_dump_cdclk_state] Changing CDCLK to 266667 kHz, VCO 2000000 
> kHz, ref 0 kHz, voltage level 1
> [drm:verify_encoder_state] [ENCODER:55:CRT]
> [drm:verify_encoder_state] [ENCODER:56:DP B]
> [drm:verify_encoder_state] [ENCODER:60:HDMI B]
> [drm:verify_encoder_state] [ENCODER:63:DP C]
> [drm:vlv_steal_power_sequencer] stealing pipe A power sequencer from 
> port C
> [drm:vlv_detach_power_sequencer] detaching pipe A power sequencer from 
> port C
> [drm:vlv_init_panel_power_sequencer] initializing pipe A power 
> sequencer for port C
> [drm:intel_dp_init_panel_power_sequencer_registers] panel power 
> sequencer register settings: PP_ON 0x8a280001, PP_OFF 0x1f40001, 
> PP_DIV 0x270f06
> [drm:_intel_dp_set_link_train] Using DP training pattern TPS1
> [drm:edp_panel_vdd_on] Turning eDP port C VDD on
> [drm:wait_panel_power_cycle] Wait for panel power cycle
> iwn0: iwn_read_firmware: ucode rev=0x12a80601
> [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 
> control abcd0000
> [drm:wait_panel_status] Wait complete
> [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
> [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled
> [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 
> 0x00100000, pins 0x00000040
> [drm:intel_hpd_irq_handler] digital hpd port C - long
> [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 1
> [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C
> [drm:edp_panel_on] Turn eDP port C panel power on
> [drm:wait_panel_power_cycle] Wait for panel power cycle
> [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 
> control abcd0008
> [drm:wait_panel_status] Wait complete
> [drm:wait_panel_on] Wait for panel power on
> [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a 
> control abcd000b
> [drm:wait_panel_status] Wait complete
> [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
> [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
> [drm:edp_panel_vdd_on] Turning eDP port C VDD on
> [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
> [drm:intel_dp_set_signal_levels] Using vswing level 0
> [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
> [drm:_intel_dp_set_link_train] Using DP training pattern TPS1
> [drm:intel_dp_link_training_clock_recovery] clock recovery OK
> [drm:_intel_dp_set_link_train] Using DP training pattern TPS2
> [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP 
> Training successful
> [drm:intel_dp_start_link_train] [CONNECTOR:64:eDP-1] Link Training 
> Passed at Link Rate = 270000, Lane count = 1[drm:intel_enable_pipe] 
> enabling pipe A
> [drm:drm_crtc_vblank_on] crtc 0, vblank enabled 0, inmodeset 1
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 
> 9.245011 -> 9.245637 [e 0 us, 0 rep]
> [drm:intel_edp_backlight_on]
> [drm:intel_panel_enable_backlight] pipe A
> [drm:intel_panel_actually_set_backlight] set backlight PWM = 3125
> [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,557)@ 
> 9.274648 -> 9.263027 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=28, diff=1, hw=1118 hw_last=1117
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,560)@ 
> 9.274648 -> 9.262964 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=29, diff=0, hw=1118 hw_last=1118
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 
> 9.279091 -> 9.279717 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=29, diff=1, hw=1119 hw_last=1118
> [drm:drm_handle_vblank_events] vblank event on 30, current 30
> [drm:_intel_set_memory_cxsr] memory self-refresh is enabled (was 
> disabled)
> [drm:intel_connector_verify_state] [CONNECTOR:64:eDP-1]
> [drm:drm_mode_object_put] OBJ ID: 69 (1)
> [drm:verify_crtc_state] [CRTC:40:pipe A]
> [drm:drm_mode_object_get] OBJ ID: 70 (4)
> [drm:drm_mode_object_put] OBJ ID: 70 (5)
> [drm:drm_atomic_state_default_clear] Clearing atomic state 
> 0xfffff80004d04000
> [drm:drm_mode_object_put] OBJ ID: 64 (6)
> [drm:drm_mode_object_put] OBJ ID: 64 (5)
> [drm:drm_mode_object_put] OBJ ID: 70 (4)
> [drm:__drm_atomic_state_free] Freeing atomic state 0xfffff80004d04000
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 
> 9.295783 -> 9.296409 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=30, diff=1, hw=1120 hw_last=1119
> [drm:vblank_disable_fn] disabling vblank on crtc 0
> [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-26)@ 
> 9.295783 -> 9.296325 [e 0 us, 0 rep]
> [drm:drm_update_vblank_count] updating vblank count on crtc 0: 
> current=31, diff=0, hw=1120 hw_last=1120
> re0: link state changed to DOWN
> wlan0: link state changed to UP
> ubt0 on uhub1
> ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 
> 2> on usbus0
> rum0 on uhub1
> rum0: <Cisco-Linksys Compact Wireless-G USB Adapter, class 0/0, rev 
> 2.00/0.01, addr 3> on usbus0
> [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
> [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
> rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> WARNING: attempt to domain_add(netgraph) after domainfinalize()
> ubt0: ubt_bulk_read_callback:979: bulk-in transfer failed: 
> USB_ERR_STALLED
> wlan1: Ethernet address: 00:18:f8:34:d2:8d
> wlan1: link state changed to UP
> .
> .
> Security policy loaded: MAC/ntpd (mac_ntpd)
> .
> [drm] GPU HANG: ecode 7:0:0x00090908, in Xorg [100467], reason: Hang 
> on rcs0, action: reset
> drmn0: Resetting chip after gpu hang
> drmn0: i915_reset_device timed out, cancelling all in-flight rendering.
> .
>
>
> At this point the only thing I can do is pressing the power button to 
> shutdown the machine.
>
>
> Jakob
>
> On 2019-04-27 02:17, Johannes Lundberg wrote:
>> Hi
>>
>> Hmm, tested on my Cherrytrail now and it runs fine with fresh kernel and
>> drm-current-kmod. But, it doesn't have DMAR.
>>
>> Can you share again dmesg output with this in /boot/loader.conf
>>
>> dev.drm.drm_debug=-1
>>
>> ?
>>
>>
>> On 4/26/19 5:00 AM, Jakob Alvermark wrote:
>>> Hi,
>>>
>>>
>>> When I upgraded -current to r346730 drm-current-kmod-4.16.g20190323
>>> wouldn't load, "device_attach: drmn0 attach returned 19"
>>>
>>> So I upgraded drm-current-kmod to 4.16.g20190424.
>>>
>>> It loads fine, but shortly after starting Xorg the screen freezes.
>>>
>>> The only way out is pressing the power button, it shuts down cleanly.
>>>
>>> /var/log/messages shows this:
>>>
>>> kernel: [drm] GPU HANG: ecode 7:0:0x60ac6ee9, in Xorg [100385],
>>> reason: Hang on rcs0, action: reset
>>> kernel: drmn0: Resetting chip after gpu hang
>>> syslogd: last message repeated 1 times
>>> kernel: drmn0: i915_reset_device timed out, cancelling all in-flight
>>> rendering.
>>> kernel: .
>>>
>>> Tried once more, same thing happened:
>>>
>>> kernel: [drm] GPU HANG: ecode 7:0:0x86f2fffd, in Xorg [100491],
>>> reason: Hang on rcs0, action: reset
>>> kernel: drmn0: Resetting chip after gpu hang
>>> syslogd: last message repeated 1 times
>>> kernel: drmn0: i915_reset_device timed out, cancelling all in-flight
>>> rendering.
>>> kernel: .
>>>
>>> Reverting back to drm-current-kmod-4.16.g20190323 and -current to
>>> r346593 (yay boot environments!) it is stable.
>>>
>>> This is on a laptop with CPU: Intel(R) Pentium(R) CPU  N3540 @
>>> 2.16GHz (2166.72-MHz K8-class CPU)
>>> Baytrail graphics.
>>>
>>>
>>> Jakob
>>>
>>> _______________________________________________
>>> freebsd-x11@freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-x11
>>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5eab5bae-fd3c-0839-9d93-a8b7a4096f6d>