Date: Thu, 23 Jan 2014 15:08:06 -0600 From: Derek Ragona <derek@computinginnovations.com> To: David Tenney <davidatenney@gmail.com>, freebsd-questions@freebsd.org Subject: Re: FreeBSD 9.2 won't boot without a video console under KVM Message-ID: <6.0.0.22.2.20140123150005.0665e0c8@mail.computinginnovations.com> In-Reply-To: <CA%2BOh8U0%2BRmwCX-p23n9qc9uFfqjfQCgARypL2mAWw8F=JK==_A@mail.g mail.com> References: <CA%2BOh8U0%2BRmwCX-p23n9qc9uFfqjfQCgARypL2mAWw8F=JK==_A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 01:06 PM 1/23/2014, David Tenney wrote:
>I'm trying to run a FreeBSD 9.2 64-bit installation under KVM, but am
>having issues when I remove the video hardware and install a serial console
>connection. The installation boots just fine when video/Cirrus hardware is
>provided to the virtual machine, but once it is removed, the installation
>stops at the BTX loader and causes KVM to go into Paused mode, which cannot
>be returned to Running. Here is a list of adjustments that were made to
>configuration files:
>
>/etc/ttys:
>
>ttyu0 "/usr/libexec/getty std.9600" vt100 on secure
>
>/boot/defaults/loader.conf:
>
>console="comconsole"
>
>/boot.config:
>
>echo "-hP" > /boot.config
>
>Any help would be great. Thanks!
>
>--
>David
I have systems setup to do serial and regular consoles. In my setup I
access the serial console over lan via ipmitool.
In loader.conf I have
comsole="comconsole,vidconsole"
comconsole_speed="115200"
boot_multicons="YES"
boot_serial="YES"
Along with some hint.uart settings such as:
hint.uart.2.baud="115200"
hint.uart.2.port="0x3e8"
hint.uart.2.irq="10"
hint.uart.2.flags="0x10"
-Derek
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20140123150005.0665e0c8>