Date: Tue, 26 Oct 2004 15:15:13 +0900 From: Ganbold <ganbold@micom.mng.net> To: freebsd-current@freebsd.org Cc: cguttesen@yahoo.dk Subject: FreeBSD 5.3 problem on Dual AMD64 2.1GHz with 8GB RAM Message-ID: <6.1.2.0.2.20041026131737.02b55aa0@202.179.0.80>
next in thread | raw e-mail | index | archive | help
Hi,
I still have problem running FreeBSD 5.3 with 8GB RAM on Dual amd64 2.1GHz
(IBM @server 325, ServeRAID 6M) with 8GB RAM.
I did cvsup and updated (made world, kernel) to latest using RELENG_5_3 tag.
It was working ok with 4 GB RAM. Afterwards I added another 4GB RAM and=20
tried to boot FreeBSD
with 8GB RAM. However it showed various errors and login didn't work. You=20
can see serial console messages
at the end of my email.
What should I do? I really want to run this machine with 8GB RAM.
Any ideas?
Errors were something like:
---------------------------------------------------------------------
Starting sshd
/libexec/ld.elf.so.1: Cannot fstat "/usr/lib/libssh.so.2"
Starting inetd
/libexec/ld.elf.so.1: Cannot fstat "/usr/lib/libwrap.so.3"
login: root
Oct 14:31:25 amd getty[428]: /usr/bin/login: Permission denied
---------------------------------------------------------------------
I built and installed latest kernel of RELENG_5_3 tag with following=20
debugging options in kernel config file.
----------------------------------------------------------------------------=
----------------------------------
makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug=
symbols
options WITNESS
options WITNESS_KDB
options WITNESS_SKIPSPIN
options KDB
options KDB_TRACE
options DDB
options DDB_NUMSYM
options INVARIANTS
options INVARIANT_SUPPORT
options DIAGNOSTIC
----------------------------------------------------------------------------=
------------------------------------------
Following is the messages I got from serial console, first part is with 4GB=
=20
RAM, second part is with 8GB RAM:
############################################################################=
#################
Console: serial port
BIOS drive C: is disk0
BIOS 614kB/4127168kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(tsgan@amd.micom.mng.net, Mon Oct 25 18:56:14 ULAT 2004)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=3D0x30e580 -data=3D0x7ec58+0x77db8=20
-syms=3D[0x8+0x5c538+0x8+0x4e56d-]
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #4: Tue Oct 26 13:39:47 ULAT 2004
tsgan@amd.micom.mng.net:/usr/obj/usr/src/sys/AMD
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2193.18-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0xf58 Stepping =3D 8
=
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M=
CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory =3D 4227268608 (4031 MB)
avail memory =3D 4082835456 (3893 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff=
=20
iomem 0xd8000-0xdbfff on acpi0
pcib0: could not get PCI interrupt routing table for \_SB_.PCI0 -=
AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfc100000-0xfc100fff irq 19 at=
=20
device 0.0 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfc101000-0xfc101fff irq 19 at=
=20
device 0.1 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ukbd0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port=20
0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem=20
0xfe000000-0xfe00ffff,0xfe010000-0xfe01ffff irq 24 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,=20
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0d:60:14:cc:9e
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem=20
0xfe020000-0xfe02ffff,0xfe030000-0xfe03ffff irq 25 at device 1.1 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,=20
1000baseTX-FDX, auto
bge1: Ethernet address: 00:0d:60:14:cc:9f
pci2: <mass storage, SCSI> at device 2.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver=20
attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 3.0 on pci3
pci4: <PCI bus> on pcib4
ips0: <Adaptec ServeRAID Adapter> mem 0xfe100000-0xfe100fff irq 28 at=20
device 8.0 on pci4
ips0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver=20
attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on=
acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem=20
0xcb000-0xcb7ff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 0.976 msec
acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata1-master UDMA33
ips0: adapter type: ServeRAID 6M (marco)
ips0: logical drives: 1
ips0: Logical Drive 0: RAID5 sectors: 355481600, state OK
ipsd0: <Logical Drive> on ips0
ipsd0: Logical Drive (173575MB)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ipsd0s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ipsd0s1b as swap device
Starting file system checks:
/dev/ipsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1a: clean, 479984 free (704 frags, 59910 blocks, 0.1%=
fragmentation)
/dev/ipsd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1f: clean, 1003939 free (59 frags, 125485 blocks, 0.0%=20
fragmentation)
/dev/ipsd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1d: clean, 8989787 free (49579 frags, 1117526 blocks, 0.5%=20
fragmentation)
/dev/ipsd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1e: clean, 4997667 free (275 frags, 624674 blocks, 0.0%=20
fragmentation)
/dev/ipsd0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1g: clean, 65656968 free (392 frags, 8207072 blocks, 0.0%=20
fragmentation)
Setting hostname: amd.micom.mng.net.
bge0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3D1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 192.168.0.50 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:0d:60:14:cc:9e
media: Ethernet 100baseTX <full-duplex>
status: no carrier
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.168.0.1
Additional routing options:.
Starting devd.
kbdcontrol: cannot open /dev/kbd1: Device busy
Mounting NFS file systems:.
Starting syslogd.
Oct 26 14:15:10 amd syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib=
/usr/local/lib
Starting usbd.
Starting local daemons:.
Updating motd.
Configuring syscons: font8x16 font8x8 blanktime=20
screensavermodule_register_init: MOD_LOAD (logo_saver, 0xffffffffb63c1430,=
=20
0) error 19
.
Starting sshd.
Oct 26 14:15:11 amd kernel: logo_saver: the console does not support=20
M_VGA_CG320
Initial amd64 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:Expensive timeout(9) function:=20
0xffffffff801a91e0(0xffffffff80825000) 0.002224584 s
mysqld.
Additional TCP options:.
Starting inetd.
Starting background file system checks in 60 seconds.
Tue Oct 26 14:15:12 ULAT 2004
=E0Stopping inetd.
Shutting down daemon processes: mysqld.
Stopping cron.
Shutting down local daemons:.
Writing entropy file:.
.
Oct 26 14:16:52 amd syslogd: exiting on signal 15
boot() called on cpu#0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 2 2 0 0 done
No buffers busy after final sync
Uptime: 1m56s
ips0: flushing cache
Shutting down ACPI
The operating system has halted.
Please press any key to reboot.
############################################################################=
#################
Console: serial port
BIOS drive C: is disk0
BIOS 614kB/4127168kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(tsgan@amd.micom.mng.net, Mon Oct 25 18:56:14 ULAT 2004)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=3D0x30e580 -data=3D0x7ec58+0x77db8=20
--=08syms=3D[0x8+0x5c538+0x8+0x4e56d-]
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #4: Tue Oct 26 13:39:47 ULAT 2004
tsgan@amd.micom.mng.net:/usr/obj/usr/src/sys/AMD
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2193.18-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0xf58 Stepping =3D 8
=
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M=
CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory =3D 8589934592 (8192 MB)
avail memory =3D 8249974784 (7867 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff=
=20
iomem 0xd8000-0xdbfff on acpi0
pcib0: could not get PCI interrupt routing table for \_SB_.PCI0 -=
AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfc100000-0xfc100fff irq 19 at=
=20
device 0.0 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfc101000-0xfc101fff irq 19 at=
=20
device 0.1 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ukbd0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port=20
0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem=20
0xfe000000-0xfe00ffff,0xfe010000-0xfe01ffff irq 24 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,=20
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0d:60:14:cc:9e
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem=20
0xfe020000-0xfe02ffff,0xfe030000-0xfe03ffff irq 25 at device 1.1 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,=20
1000baseTX-FDX, auto
bge1: Ethernet address: 00:0d:60:14:cc:9f
pci2: <mass storage, SCSI> at device 2.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver=20
attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 3.0 on pci3
pci4: <PCI bus> on pcib4
ips0: <Adaptec ServeRAID Adapter> mem 0xfe100000-0xfe100fff irq 28 at=20
device 8.0 on pci4
ips0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver=20
attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on=
acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem=20
0xcb000-0xcb7ff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 0.976 msec
acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata1-master UDMA33
ips0: adapter type: ServeRAID 6M (marco)
ips0: logical drives: 1
ips0: Logical Drive 0: RAID5 sectors: 355481600, state OK
ipsd0: <Logical Drive> on ips0
ipsd0: Logical Drive (173575MB)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ipsd0s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ipsd0s1b as swap device
Starting file system checks:
/dev/ipsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1a: clean, 479984 free (704 frags, 59910 blocks, 0.1%=
fragmentation)
/dev/ipsd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1f: clean, 1003939 free (59 frags, 125485 blocks, 0.0%=20
fragmentation)
/dev/ipsd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1d: clean, 8989787 free (49579 frags, 1117526 blocks, 0.5%=20
fragmentation)
/dev/ipsd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1e: clean, 4997667 free (275 frags, 624674 blocks, 0.0%=20
fragmentation)
/dev/ipsd0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ipsd0s1g: clean, 65656963 free (395 frags, 8207071 blocks, 0.0%=20
fragmentation)
Setting hostname: amd.micom.mng.net.
bge0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3D1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 192.168.0.50 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:0d:60:14:cc:9e
media: Ethernet 100baseTX <full-duplex>
status: no carrier
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.168.0.1
Additional routing options:.
Starting devd.
kbdcontrol: cannot open /dev/kbd1: Device busy
Mounting NFS file systems:.
Starting syslogd.
Oct 26 14:23:26 amd syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib=
/usr/local/lib
Starting usbd.
Starting local daemons:.
Updating motd.
Configuring syscons: font8x16 font8x8 blanktime=20
screensavermodule_register_init: MOD_LOAD (logo_saver, 0xffffffffb9e3e430,=
=20
0) error 19
.
Starting sshd.
Oct 26 14:23:27 amd kernel: logo_saver: the console does not support=20
M_VGA_CG320
/libexec/ld-elf.so.1: /usr/lib/libasn1.so.7: invalid file format
Initial amd64 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization: mysqld.
Additional TCP options:.
Expensive timeout(9) function:=20
0xffffffff801a91e0(0xfff/libexec/ld-elf.fso.1: f/usr/lib/libpthrfead.so.1:=
=20
Sharedf object has no rfun-time symbol t8able082500
0) 0.002212571 s
/libexec/ld-elf.so.1: /usr/lib/libpthread.so.1: Shared object has no=20
run-time symbol table
Starting background file system checks in 60 seconds.
Tue Oct 26 14:23:28 ULAT 2004
logger: 1: Syntax error: word unexpected (expectpaing ")")
ntouch: 1: Syntaxic: ff error: "(" unexspected
_write: type 0xffffff018d1405a0 0 (0,32)
cpuid =3D 0
KDB: stack backtrace:
panic() at 0xffffffff80254ac3 =3D panic+0x253
ffs_write() at 0xffffffff8033edd2 =3D ffs_write+0xb2
vn_write() at 0xffffffff802bdc00 =3D vn_write+0x1d0
dofilewrite() at 0xffffffff8027c800 =3D dofilewrite+0xb0
write() at 0xffffffff8027ca38 =3D write+0x68
syscall() at 0xffffffff8038249b =3D syscall+0x4bb
Xfast_syscall() at 0xffffffff80370198 =3D Xfast_syscall+0xa8
--- syscall (4, FreeBSD ELF64, write), rip =3D 0x200917540, rsp =3D=20
0x7fffffffea78, rbp =3D 0x528000 ---
KDB: enter: panic
[thread 100073]
Stopped at 0xffffffff8026ef6f =3D kdb_enter+0x2f: nop
db> bt
No such command
db> help
print p examine x search set =
write
w delete d break dwatch watch =
dhwatch
hwatch step s continue c until next
match trace where call show ps gdb
reset kill watchdog thread panic
db> w
Nothing written.
db> continue
boot() called on cpu#0
Uptime: 12s
Cannot dump. No dump device defined.
Shutting down ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping o
############################################################################=
######
thanks in advance,
Ganbold
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.1.2.0.2.20041026131737.02b55aa0>