Date: Tue, 01 Feb 2005 11:42:18 -0500 From: Mike Tancsa <mike@sentex.net> To: freebsd-performance@freebsd.org Subject: Re: FreeBSD 5.3 I/O Performance / Linux 2.6.10 | Continued Discussion Message-ID: <6.2.1.2.0.20050201113451.0313ee20@64.7.153.2> In-Reply-To: <20050130120437.93214.qmail@web26810.mail.ukl.yahoo.com> References: <20050130120437.93214.qmail@web26810.mail.ukl.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I posted up an excel workbook at http://www.tancsa.com/iozone-tests.xls.bz2 This has the results of iozone on RELENG_5, HEAD, HEAD with debug.mpsafevfs=1 and LINUX 2.6.10 on ext3 as well as some quick NFS tests against RELENG_5 and LINUX as servers with FreeBSD RELENG-5 clients. Once again, the hardware is the same. The boot OS drives have changed, but the tests were all done against one large RAID5 partition. HTT disabled in the BIOS, using SCHED_4BSD on a 3ware 8xxx controller in RAID5 with 4 drives. dmesg attached. ---Mike [-- Attachment #2 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #1: Mon Jan 31 09:07:33 EST 2005 mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs ACPI APIC Table: <AOpen AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 2147418112 (2047 MB) avail memory = 2096857088 (1999 MB) ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AOpen AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xfd000000-0xfd3fffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xc000-0xc01f mem 0xfd400000-0xfd41ffff irq 17 at device 1.0 on pci2 em0: Ethernet address: 00:01:80:53:ff:04 em0: Speed:N/A Duplex:N/A pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xd000-0xd03f mem 0xfc800000-0xfc81ffff,0xfc820000-0xfc83ffff irq 16 at device 4.0 on pci3 em1: Ethernet address: 00:0e:0c:5d:f7:c0 em1: Speed:N/A Duplex:N/A twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0xd100-0xd10f mem 0xfc000000-0xfc7fffff irq 17 at device 5.0 on pci3 twe0: [GIANT-LOCKED] twe0: 4 ports, Firmware FE7S 1.05.00.056, BIOS BE7X 1.08.00.046 fwohci0: <Lucent FW322/323> mem 0xfc860000-0xfc860fff irq 22 at device 13.0 on pci3 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:01:80:13:94:53:ff:05 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNK0> irq 5 on acpi0 pci_link7: <ACPI PCI Link LNK1> irq 0 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xca7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. Timecounter "TSC" frequency 2992512540 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 3100 packets/entry by default ad0: 38166MB <ST340014A/3.06> [77545/16/63] at ata0-master UDMA100 acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0L15> at ata1-master UDMA33 twed0: <Unit 0, RAID5, Normal> on twe0 twed0: 715422MB (1465185024 sectors) Trying to mount root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.0.20050201113451.0313ee20>