Date: Sun, 03 Jul 2005 21:31:07 -0400 From: Mike Tancsa <mike@sentex.net> To: Martin Nilsson <martin@gneto.com> Cc: freebsd-current@freebsd.org Subject: Re: 6.0-CURRENT SNAP004 hangs on amr Message-ID: <6.2.1.2.0.20050703212843.07889088@64.7.153.2> In-Reply-To: <42C6DA5F.9070303@gneto.com> References: <70e8236f05070208212e36c375@mail.gmail.com> <42C6DA5F.9070303@gneto.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 02:18 PM 02/07/2005, Martin Nilsson wrote: >Joao Barros wrote: >>I was trying to install 6.0-CURRENT SNAP004 i386 from CD and the >>kernel hangs on amr. >>I tried setting hint.acpi.0.disabled=1 with no change. >>Removing the card the kernel boots right and I get to see sysinstall. >>FreeBSD 5.4 installs and runs fine. > >I have the same problem with a MegaRAID Elite 1600 card, the problem is >with interrupt routing in CURRENT. I have tested my card in both a P3 and >a P4/Xeon with the same result. There is a PCI-PCI bridge on these cards, >I think that it is the cause of this problem as the 320-1 works as it should. I think I too am seeing this on a 4way PIII [hippo]# grep -i ^amr /var/run/dmesg.boot amr0: <LSILogic MegaRAID 1.51> mem 0xf0000000-0xf7ffffff irq 16 at device 0.0 on pci4 amr0: <LSILogic PERC 3/DC> Firmware 161J, BIOS 3.17, 128MB RAM amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 34556MB (70770688 sectors) RAID 5 (optimal) [hippo]# Is there a work around ? ---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.0.20050703212843.07889088>