Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 1 Sep 2020 09:20:58 +0700
From:      Eugene Grosbein <eugen@grosbein.net>
To:        Charles Lecklider <freebsd-stable@lists.invis.net>, freebsd-stable@freebsd.org
Subject:   Re: Cannot find announcement that min supported i386 CPU is now i686
Message-ID:  <6bd2c4f6-5ce1-5a0d-14b3-71831a0443f4@grosbein.net>
In-Reply-To: <2986c4ef-6e73-50f9-215e-20e8a9793434@lists.invis.net>
References:  <4460db23-9a29-7972-1b41-74585764a5d7@lists.invis.net> <20200831205136.GA15141@elch.exwg.net> <2986c4ef-6e73-50f9-215e-20e8a9793434@lists.invis.net>

next in thread | previous in thread | raw e-mail | index | archive | help
01.09.2020 6:50, Charles Lecklider via freebsd-stable wrote:

> On 2020-08-31 21:51, Christoph Moench-Tegeder wrote:
>> Given that the hardware notes
>> https://www.freebsd.org/releases/11.4R/hardware.html#proc-i386
>> explicitely claim 80486 compatibility, I'd guess this was not a
>> consciuous decision but a blunder which wasn't caught
> 
> Hmm.... I'd assumed that each release was at least *booted* on a real
> 486, but obviously not.
> 
>> (perhaps as
>> hardware of that vintage is getting rare these days. That box
>> must be old enough to buy alcohol by now?).
> 
> Yes, I first built it in 1998 IIRC; it ran Windows for a few years
> (desktop, gaming) then FreeBSD from about 2002. It's been in nearly
> continuous operation since, although I did have to replace the PSU last
> year ;-)

Just for the record, I still run AMD Geode-based FreeBSD 11.3-STABLE as my home WiFi Access Point.
This fanless system has 500Mhz 32-bit only i586-class CPU, 1GB RAM (no swap),
two 100M wired NICs vr0/vr1 onboard and Atheros 5212 ath0 wireless mini-PCI card (not PCI-E)
that supports multiple WLANs.

It has CompactFlash slot for ada0 occupied with 16GB CF card at boot device (nanobsd, r/o mounted)
plus ada1 2.5" PATA HDD WDC WD2500BEVE (250G) as additional storage.

Until recently is also served as PPPoE client (mpd5 kernel level) for uplink
with ipfw nat being able to saturate 100MBit/s uplink connection despite of NAT+PPPoE overhead.

CPU: Geode(TM) Integrated Processor by AMD PCS (499.91-MHz 586-class CPU)
  Origin="AuthenticAMD"  Id=0x5a2  Family=0x5  Model=0xa  Stepping=2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>

Of course, its NanoBSD image is built with CPUTYPE=i586 as well as installed packages.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6bd2c4f6-5ce1-5a0d-14b3-71831a0443f4>