Date: Tue, 27 Feb 2001 12:25:07 +1100 From: Murray Taylor <mtaylor@bytecraft.com.au> To: "'freebsd-hardware@freebsd.org'" <freebsd-hardware@freebsd.org> Subject: Is this motherboard / system rated for SMP ? Message-ID: <710709BB8B02D311942E006067441810544268@MELEXC01>
next in thread | raw e-mail | index | archive | help
I am establishing FreeBSD 4.2 Release (from the CD Roms) on a Compaq A550 and I need to know if the motherboard is rated for SMP... The system came out of a mega graphics application and has 2 identical processors on the motherboard... I can drop the machine out of development work for a short while if I need to look inside, its just that I dont know what to look for ;-) .. I have recompiled the kernel to add IPFW, NETGRAPH and drop some uneeded net devices and am quite OK to do so as needed again. (FreeBSD on my home machine since 2.2.2) (Note the hostname in the dmesg is a dummy used for internal testing prior to domain registration) Murray Taylor Project Engineer Bytecraft P/L +61 3 9587 2555 +61 3 9580 7690 fax mtaylor@bytecraft.com.au Current dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Mon Feb 19 10:01:04 EST 2001 root@spyder.bytecraft.com.xxx:/usr/src/sys/compile/SPYDER Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 863933901 Hz CPU: Pentium III/Pentium III Xeon/Celeron (863.93-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (524224K bytes) avail memory = 519200768 (507032K bytes) Preloaded elf kernel "kernel" at 0xc0350000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035009c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=1a23)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Quadro graphics accelerator> at 0.0 irq 11 pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem 0xefe00000-0xefefffff,0xefd00000-0xefd00fff irq 11 at device 2.0 on pci2 fxp0: Ethernet address 00:50:8b:f1:de:df ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem 0xeff00000-0xeff00fff irq 11 at device 7.0 on pci2 aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs pci2: <unknown card> (vendor=0x1274, dev=0x5880) at 11.0 irq 11 isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH ATA66 controller> port 0x6460-0x646f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 11 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 11 chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0x6400-0x643f,0x6000-0x60ff irq 11 at device 31.5 on pci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed acd0: CDROM <Compaq CRD-8402B> at ata1-master using PIO4 Waiting 5 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s2a da0 at ahc0 bus 0 target 0 lun 0 da0: <COMPAQPC ATLAS10K2-TY184L DDC2> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?710709BB8B02D311942E006067441810544268>