Date: Fri, 27 Aug 2004 08:18:30 +0200 From: Poul-Henning Kamp <phk@phk.freebsd.dk> To: alpha@freebsd.org Subject: 5.3 beta1 is no go for me. Message-ID: <75963.1093587510@critter.freebsd.dk>
next in thread | raw e-mail | index | archive | help
>>>boot dka400
ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.f3.f2.f1.f0.ef.df.ee.f4.
probing hose 0, PCI
probing PCI-to-EISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus 1, slot 1 -- vga -- Compaq Qvision
bus 2, slot 0 -- pka -- QLogic ISP10x0
bus 0, slot 12 -- ewa -- DECchip 21040-AA
bus 0, slot 13 -- eia -- Intel 8255x Ethernet
ed.ec.*** keyboard not plugged in...
eb.....ea.e9.e8.e7.e6.e5.e4.e3.e2.e1.e0.
V5.7-80, built on Mar 27 2000 at 09:43:35
Memory Testing and Configuration Status
176 Meg of System Memory
Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000
Bank 1 = 64 Mbytes(16 MB Per SIMM) Starting at 0x04000000
Bank 2 = 32 Mbytes(8 MB Per SIMM) Starting at 0x08000000
Bank 3 = 16 Mbytes(4 MB Per SIMM) Starting at 0x0a000000
Testing the System
Testing the Disks (read only)
Testing the Network
Change mode to Internal loopback.
Change to Normal Operating Mode.
CPU 0 booting
(boot dka400.4.0.2000.0 -flags A)
block 0 of dka400.4.0.2000.0 is a valid boot block
reading 409 blocks from dka400.4.0.2000.0
bootstrap code read in
Building FRU table
FRU table size = 0xa33
base = 1c4000, image_start = 0, image_bytes = 33200
initializing HWRPB at 2000
initializing page table at afce000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000400010115
OSF PAL rev: 0x1000600020117
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 23 08:53:04 UTC 2004)
Memory: 180224 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5babf0+0x4d140 syms=[0x8+0x68e20+0x8+0x55872]
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000347100...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 1000/1000A
AlphaServer 1000A 5/400, 400MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000600020117
real memory = 182484992 (174 MB)
avail memory = 164610048 (156 MB)
cia0: <2117x Core Logic chipset>
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
eisab0: <PCI-EISA bridge> at device 7.0 on pci0
unexpected machine check:
mces = 0x1
vector = 0x660
param = 0xfffffc0000006060
pc = 0xfffffc00006f31e4
ra = 0xfffffc00003c0994
curproc = 0xfffffc00008c59e0
pid = 0, comm = swapper
[thread 0]
Stopped at swiz_read_1+0x54: zapnot v0,#0xf,v0 <v0=0x0>
db>
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?75963.1093587510>