Date: Fri, 14 Sep 2018 09:12:36 -0400 From: Mike Tancsa <mike@sentex.net> To: George Neville-Neil <gnn@neville-neil.com> Cc: Paul Holes <pholes@sentex.ca>, Mateusz Guzik <mjguzik@gmail.com>, netperf-users@FreeBSD.org, netperf-admin@FreeBSD.org Subject: Re: update of zoo to r338656 12.0 (was Re: zoo vs 12.0 (was: zoo vs 11.2-rc2) Message-ID: <7dc50e6a-191b-002d-9adf-df16e591c9da@sentex.net> In-Reply-To: <8ca07d41-b753-9741-49be-150d42197edc@sentex.net> References: <CAGudoHGb3FtoWAroBzVdDks6S2td-nnqJcdrkAsoiT_Q1PCYJQ@mail.gmail.com> <e3a7c7b6-e564-b5fe-ddad-6332bf6c96a0@sentex.net> <A344C6D5-BF69-48E8-8C0A-3610FE5BA15F@neville-neil.com> <b3f74263-127f-0b33-8d35-8e5c245cf826@sentex.net> <8ca07d41-b753-9741-49be-150d42197edc@sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 9/13/2018 2:27 PM, Mike Tancsa wrote:
> FYI,
> I will be upgrading zoo's kernel (only the kernel) to -r338656 tomorrow
> morning 9am zoo time, 13:00 UTC.
The boot to a 12 kernel is not looking good. It seems to have issue with
the mfi controller. Everything seems to post fine up until the timeouts.
Going to try a hard power cycle of the box and then revert to the
RELENG_11 kernel
/boot/kernel/kernel text=0x16b3020 data=0x1cc848+0x76c970
syms=[0x8+0x17d6d8+0x8+0x199fe6]
/boot/entropy size=0x1000
/boot/kernel/zfs.ko size 0x3a8008 at 0x2652000
loading required module 'opensolaris'
/boot/kernel/opensolaris.ko size 0xa4f0 at 0x29fb000
/boot/kernel/if_em.ko size 0x72b58 at 0x2a06000
Booting...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA5 r338656 amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
LLVM 6.0.1)
VT(vga): resolution 640x480
module_register: cannot register pci/em from kernel; already loaded from
if_em.ko
Module pci/em failed to register: 17
module_register: cannot register pci/igb from kernel; already loaded
from if_em.ko
Module pci/igb failed to register: 17
CPU: Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz (2300.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7dfefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 274877906944 (262144 MB)
avail memory = 267743858688 (255340 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs
FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 1 12 16 6 7 21 22 25 23 14 20 38 11 4 28 2 15 5 39 9 3 37
32 27 36 30 35 8 13 33 19 18 17 31 24 10 29 26 34
Timecounter "TSC-low" frequency 1150024636 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81128820, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pci0: <dasp, performance counters> at device 18.5 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
pci1: <dasp, performance counters> at device 18.5 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_syscontainer2: <System Container> on acpi0
acpi_syscontainer3: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd
mfi0: <Invader> port 0x6000-0x60ff mem
0xc7300000-0xc730ffff,0xc7200000-0xc72fffff irq 26 at device 0.0
numa-domain 0 on pci3
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 928, limiting to 128
mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0
mfi0: 1309 (589112779s/0x0020/info) - Shutdown command received from host
mfi0: 1310 (boot + 8s/0x0020/info) - Firmware initialization started
(PCI ID 005d/1000/0809/15d9)
mfi0: 1311 (boot + 8s/0x0020/info) - Firmware version 4.210.10-2910
mfi0: 1312 (boot + 10s/0x0020/info) - Package version 24.1.1-0001
mfi0: 1313 (boot + 10s/0x0020/info) - Board Revision
mfi0: 1314 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6)
mfi0: 1315 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) Info:
enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000
mfi0: 1316 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7)
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2
mfi0: 1317 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) Info:
enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000
mfi0: 1318 (boot + 34s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6)
Path 4433221106000000, CDB: 28 00 3a 38 60 2f 00 00 01 00, Sense: 6/29/00
mfi0: 1319 (boot + 34s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7)
Path 4433221107000000, CDB: 28 00 3a 38 60 2f 00 00 01 00, Spci4: <ACPI
PCI bus> numa-domain 0 on pcib4
ense: 6/29/00
mfi0: 1320 (590245504s/0x0020/info) - Time established as 09/14/18
13:05:04; (37 seconds since power on)
mfi0: 1321 (590245504s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6)
Path 4433221106000000, CDB: 2e 00 3a 38 3d fb 00 00 01 00, Sense: 6/29/00
mfi0: 1322 (590245505s/0x0020/WARN) - Patrol Read can't be started, as
PDs are either not ONLINE, or are in a VD with an active process, or are
in an excluded VD
nvme0: <DC P3700 SSD> mem 0xc7410000-0xc7413fff irq 32 at device 0.0
numa-domain 0 on pci4
pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x5020-0x503f
mem 0xc5c00000-0xc5dfffff,0xc5e04000-0xc5e07fff irq 40 at device 0.0
numa-domain 0 on pci5
ix0: using 2048 tx descriptors and 2048 rx descriptors
ix0: msix_init qsets capped at 16
ix0: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix0: using 10 rx queues 10 tx queues
ix0: Using MSIX interrupts with 11 vectors
ix0: allocated for 10 queues
ix0: allocated for 10 rx queues
ix0: Ethernet address: 0c:c4:7a:1f:2f:a0
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 10/2048, RX 10/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x5000-0x501f
mem 0xc5a00000-0xc5bfffff,0xc5e00000-0xc5e03fff irq 44 at device 0.1
numa-domain 0 on pci5
ix1: using 2048 tx descriptors and 2048 rx descriptors
ix1: msix_init qsets capped at 16
ix1: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix1: using 10 rx queues 10 tx queues
ix1: Using MSIX interrupts with 11 vectors
ix1: allocated for 10 queues
ix1: allocated for 10 rx queues
ix1: Ethernet address: 0c:c4:7a:1f:2f:a1
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 10/2048, RX 10/2048
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x4020-0x403f
mem 0xc5600000-0xc57fffff,0xc5804000-0xc5807fff irq 42 at device 0.0
numa-domain 0 on pci6
ix2: using 2048 tx descriptors and 2048 rx descriptors
ix2: msix_init qsets capped at 16
ix2: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix2: using 10 rx queues 10 tx queues
ix2: Using MSIX interrupts with 11 vectors
ix2: allocated for 10 queues
ix2: allocated for 10 rx queues
ix2: Ethernet address: 0c:c4:7a:1f:2f:a2
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix2: netmap queues/slots: TX 10/2048, RX 10/2048
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x4000-0x401f
mem 0xc5400000-0xc55fffff,0xc5800000-0xc5803fff irq 45 at device 0.1
numa-domain 0 on pci6
ix3: using 2048 tx descriptors and 2048 rx descriptors
ix3: msix_init qsets capped at 16
ix3: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix3: using 10 rx queues 10 tx queues
ix3: Using MSIX interrupts with 11 vectors
ix3: allocated for 10 queues
ix3: allocated for 10 rx queues
ix3: Ethernet address: 0c:c4:7a:1f:2f:a3
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: netmap queues/slots: TX 10/2048, RX 10/2048
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port
0x7110-0x7117,0x7100-0x7103,0x70f0-0x70f7,0x70e0-0x70e3,0x7020-0x703f
mem 0xc7538000-0xc75387ff irq 16 at device 17.4 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xc7500000-0xc750ffff
irq 19 at device 20.0 numa-domain 0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xc7534000-0xc75343ff
irq 18 at device 26.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem
0xc6000000-0xc6ffffff,0xc7000000-0xc701ffff irq 16 at device 0.0
numa-domain 0 on pci9
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xc7533000-0xc75333ff
irq 18 at device 29.0 numa-domain 0 on pci2
usbus2: EHCI version 1.0
usbus2 numa-domain 0 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port
0x7070-0x7077,0x7060-0x7063,0x7050-0x7057,0x7040-0x7043,0x7000-0x701f
mem 0xc7532000-0xc75327ff irq 16 at device 31.2 numa-domain 0 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib10: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci10: <ACPI PCI bus> numa-domain 1 on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci10
pci11: <ACPI PCI bus> numa-domain 1 on pcib11
ix4: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xf020-0xf03f
mem 0xfbc80000-0xfbcfffff,0xfbd04000-0xfbd07fff irq 56 at device 0.0
numa-domain 1 on pci11
ix4: using 2048 tx descriptors and 2048 rx descriptors
ix4: msix_init qsets capped at 16
ix4: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix4: using 10 rx queues 10 tx queues
ix4: Using MSIX interrupts with 11 vectors
ix4: allocated for 10 queues
ix4: allocated for 10 rx queues
ix4: Ethernet address: 00:1b:21:47:3b:24
ix4: PCI Express Bus: Speed 5.0GT/s Width x8
ix4: netmap queues/slots: TX 10/2048, RX 10/2048
ix5: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xf000-0xf01f
mem 0xfbc00000-0xfbc7ffff,0xfbd00000-0xfbd03fff irq 60 at device 0.1
numa-domain 1 on pci11
ix5: using 2048 tx descriptors and 2048 rx descriptors
ix5: msix_init qsets capped at 16
ix5: pxm cpus: 10 queue msgs: 63 admincnt: 1
ix5: using 10 rx queues 10 tx queues
ix5: Using MSIX interrupts with 11 vectors
ix5: allocated for 10 queues
ix5: allocated for 10 rx queues
ix5: Ethernet address: 00:1b:21:47:3b:25
ix5: PCI Express Bus: Speed 5.0GT/s Width x8
ix5: netmap queues/slots: TX 10/2048, RX 10/2048
pcib12: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci10
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
em0: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem
0xfbec0000-0xfbedffff,0xfbe00000-0xfbe7ffff,0xfbee0000-0xfbee3fff irq 64
at device 0.0 numa-domain 1 on pci12
em0: attach_pre capping queues at 2
Current cap: 0x460b
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 2
em0: pxm cpus: 10 queue msgs: 4 admincnt: 1
em0: using 2 rx queues 2 tx queues
em0: Using MSIX interrupts with 3 vectors
em0: allocated for 2 tx_queues
em0: allocated for 2 rx_queues
em0: Ethernet address: 68:05:ca:06:ee:3e
em0: netmap queues/slots: TX 2/1024, RX 2/1024
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff pnpid
ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mfid0 numa-domain 0 on mfi0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WCC137TALF5K
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2861588MB (5860533168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada1: Serial Number WD-WCC134FU4DRY
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada2: Serial Number WD-WCC137TALKU5
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors)
ada2: quirks=0x1<4K>
mfid0: 476416MB (975699968 sectors) RAID volume 'SSD1' is optimal
ada3 at ahcich4 bus 0 scbus5 target 0 lun 0
ada3: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada3: Serial Number WD-WCC5D2UU1U3Y
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 3815447MB (7814037168 512 byte sectors)
ada3: quirks=0x1<4K>
mfid1 numa-domain 0 on mfi0
mfid1: 476416MB (975699968 sectors) RAID volume 'SSD2' is optimal
ada4 at ahcich5 bus 0 scbus6 target 0 lun 0
ada4: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada4: Serial Number WD-WCC5D2UU1SF9
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 3815447MB (7814037168 512 byte sectors)
ada4: quirks=0x1<4K>
ada5 at ahcich6 bus 0 scbus7 target 0 lun 0
ada5: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada5: Serial Number WD-WCC5D2UU18NK
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 3815447MB (7814037168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ahcich7 bus 0 scbus8 target 0 lun 0
ada6: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada6: Serial Number WD-WCC5D2UU1N29
ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 3815447MB (7814037168 512 byte sectors)
ada6: quirks=0x1<4K>
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
nvd0: <INTEL SSDPEDMD800G4> NVMe namespace
nvd0: 763097MB (1562824368 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 21 ports with 21 removable, self powered
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub3 numa-domain 0 on uhub2
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2>
on usbus1
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub4 numa-domain 0 on uhub1
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2>
on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x04d9 product 0x1400> at usbus0
ukbd0 numa-domain 0 on uhub0
ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 1>
on usbus0
kbd2 at ukbd0
ugen0.3: <FTDI USB FAST SERIAL ADAPTER> at usbus0
ugen0.4: <vendor 0x0557 product 0x7000> at usbus0
uhub5 numa-domain 0 on uhub0
uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3>
on usbus0
uhub5: 4 ports with 3 removable, self powered
ugen0.5: <vendor 0x0557 product 0x2419> at usbus0
ukbd1 numa-domain 0 on uhub5
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4>
on usbus0
kbd3 at ukbd1
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 54 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 84 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 117 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 147 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 177 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 207 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 240 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 271 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 301 SECONDS
mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 332 SECONDS
its getting stuck here.
--
-------------------
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7dc50e6a-191b-002d-9adf-df16e591c9da>