Date: Mon, 08 Dec 2003 10:39:31 +0900 From: Jun Kuriyama <kuriyama@imgsrc.co.jp> To: "Maxim M. Kazachek" <stranger@sberbank.sibnet.ru> Cc: pdeuskar@freebsd.org Subject: Re: dev/em: Link is not up until 2 seconds after "ifconfig up" Message-ID: <7my8to5bqk.wl@black.imgsrc.co.jp> In-Reply-To: <20031207150250.L35454@sbk-gw.sibnet.ru> References: <7m8ylp6pn0.wl@black.imgsrc.co.jp> <20031207150250.L35454@sbk-gw.sibnet.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
At Sun, 7 Dec 2003 15:04:51 +0600 (NOVT),
Maxim M. Kazachek wrote:
> Did you tried to specify link speed rather than use autosence.
> Perhaps this delay is due to media sense?
Hmm, no luck. I've fixed the speed and mediaopt both of em(4) and
switch, but it shows autoselect state and no carrier...
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet 192.168.128.3 netmask 0xffffff00 broadcast 192.168.128.255
inet6 fe80::230:48ff:fe28:4d75%em1 prefixlen 64 scopeid 0x2
ether 00:30:48:28:4d:75
media: Ethernet 100baseTX <full-duplex> (autoselect)
status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet 192.168.128.3 netmask 0xffffff00 broadcast 192.168.128.255
inet6 fe80::230:48ff:fe28:4d75%em1 prefixlen 64 scopeid 0x2
ether 00:30:48:28:4d:75
media: Ethernet 100baseTX <full-duplex> (autoselect)
status: no carrier
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet 192.168.128.3 netmask 0xffffff00 broadcast 192.168.128.255
inet6 fe80::230:48ff:fe28:4d75%em1 prefixlen 64 scopeid 0x2
ether 00:30:48:28:4d:75
media: Ethernet 100baseTX <full-duplex>
status: active
--
Jun Kuriyama <kuriyama@imgsrc.co.jp> // IMG SRC, Inc.
<kuriyama@FreeBSD.org> // FreeBSD Project
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7my8to5bqk.wl>