Date: Tue, 16 Jan 2007 10:30:05 +0100 From: Palle Girgensohn <girgen@FreeBSD.org> To: Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> Cc: questions@FreeBSD.org, obrien@FreeBSD.org Subject: Re: if_nfe on nVidia chipset Message-ID: <865782382FCBDD7AC2E525C7@rambutan.pingpong.net> In-Reply-To: <EF346C8630188DB1EC227A78@rambutan.pingpong.net> References: <92F17ADAEC575CF1EDBE870C@rambutan.pingpong.net> <45841980.5090100@se.hiroshima-u.ac.jp> <06DA4ABFFA1F59DF90AE0285@rambutan.pingpong.net> <458956C6.6080004@se.hiroshima-u.ac.jp> <EF346C8630188DB1EC227A78@rambutan.pingpong.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Is there any way I can help to try and fix this? Regards, Palle --On torsdag, december 21, 2006 19.04.17 +0100 Palle Girgensohn=20 <girgen@FreeBSD.org> wrote: > > > --On torsdag, december 21, 2006 00.29.10 +0900 Shigeaki Tagashira > <shigeaki@se.hiroshima-u.ac.jp> wrote: > >> Palle Girgensohn wrote: >>> --On s=F6ndag, december 17, 2006 01.06.24 +0900 Shigeaki Tagashira >>> <shigeaki@se.hiroshima-u.ac.jp> wrote: >>> >>>> I have the same one. And if_nfe works well on it, in both FreeBSD >>>> 6.2-PRERELEASE and 7-CURRENT. Please try to initialize if_nfe using >>>> ifconfig command; >>>> # ifconfig nfe1 down; ifconfig nfe1 up >>>> >>>> --- >>>> S. Tagashira >>> >>> Hi Tagashira-san, >>> >>> Tried a lot of stuff, up and down and also "debug" flag, but nothing >>> helps. >>> >>> ifconfig says "media: Ethernet autoselect (none)" >>> >>> I can ping the interface itself, but nothing else. >>> >>> Any ideas? >> >> Hi, >> I updated my web site for FreeBSD nfe driver. >> Please try the lastest nfe driver and e1000phy patch provided on the web >> site. These codes were modified to detect link media more correctly. > > > Hello, > > Sorry, there's no change, it still acts the same way. > > media: Ethernet autoselect (none) > status: active > > and the network does not work. No mediaopts work. > > Regards, > Palle > > >> >> --- >> S. Tagashira >> >> >> >>> >>> Regards, >>> Palle >>> >>> >>> >>> >>>> >>>> Palle Girgensohn wrote: >>>>> Hi! Sorry for the cross post, I'd love to know if I can get this >>>>> working or not. >>>>> >>>>> Regards, >>>>> Palle >>>>> >>>>> ---------- Forwarded Message ---------- >>>>> Date: tisdag, december 12, 2006 18.52.35 +0100 >>>>> From: Palle Girgensohn <girgen@FreeBSD.org> >>>>> To: hardware@freebsd.org >>>>> Subject: if_nfe on Asus M2N-SLI deluxe? >>>>> >>>>> Hi! >>>>> >>>>> Does anybody know if if_nfe should work on the above motherboard? I >>>>> snached the patch for FreeBSD-6.2 from >>>>> <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; >>>>> and >>>>> tried it. The kernel and ifconfig seems happy, but it does not work; >>>>> ifconfig reports "active" but ifconfig reports: >>>>> >>>>> nfe0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 >>>>> options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> >>>>> ether 00:17:31:86:aa:31 >>>>> media: Ethernet autoselect (none) >>>>> status: no carrier >>>>> nfe1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >>>>> options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> >>>>> inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4 >>>>> inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255 >>>>> ether 00:17:31:86:b4:c6 >>>>> media: Ethernet autoselect (none) >>>>> status: active >>>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 >>>>> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 >>>>> scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 >>>>> The media part of nfe1 looks bad, eh? >>>>> >>>>> Is it supposed to work? How can I help to get it working? >>>>> >>>>> FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else >>>>> needed? >>>>> >>>>> /Palle >>>>> >>>>> >>>>> >>>>> ---------- End Forwarded Message ---------- >>>>> >>>>> >>>>> >>>>> >>>>> = ---------------------------------------------------------------------- >>>>> -- >>>>> >>>>> Subject: >>>>> if_nfe on Asus M2N-SLI deluxe? >>>>> From: >>>>> Palle Girgensohn <girgen@FreeBSD.org> >>>>> Date: >>>>> Tue, 12 Dec 2006 18:52:35 +0100 >>>>> To: >>>>> hardware@freebsd.org >>>>> >>>>> To: >>>>> hardware@freebsd.org >>>>> CC: >>>>> obrien@freebsd.org >>>>> >>>>> >>>>> Hi! >>>>> >>>>> Does anybody know if if_nfe should work on the above motherboard? I >>>>> snached the patch for FreeBSD-6.2 from >>>>> <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>; >>>>> and >>>>> tried it. The kernel and ifconfig seems happy, but it does not work; >>>>> ifconfig reports "active" but ifconfig reports: >>>>> >>>>> nfe0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 >>>>> options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> >>>>> ether 00:17:31:86:aa:31 >>>>> media: Ethernet autoselect (none) >>>>> status: no carrier >>>>> nfe1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >>>>> options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> >>>>> inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid >>>>> 0x4 inet 192.168.1.191 netmask 0xffffff00 broadcast >>>>> 192.168.1.255 ether 00:17:31:86:b4:c6 >>>>> media: Ethernet autoselect (none) >>>>> status: active >>>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 >>>>> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 >>>>> scopeid 0x5 inet 127.0.0.1 netmask 0xff000000 >>>>> The media part of nfe1 looks bad, eh? >>>>> >>>>> Is it supposed to work? How can I help to get it working? >>>>> >>>>> FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else >>>>> needed? >>>>> >>>>> /Palle >>>>> >>>>> >>>>> >>>>> = ---------------------------------------------------------------------- >>>>> -- >>>>> >>>>> Copyright (c) 1992-2006 The FreeBSD Project. >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >>>>> 1994 The Regents of the University of California. All rights = reserved. >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>>> FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006 >>>>> = girgen@rambutan.pingpong.net:/usr/obj/.a/banan/usr/src/sys/WORKSTA >>>>> TI ON Timecounter "i8254" frequency 1193182 Hz quality 0 >>>>> CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU) >>>>> Origin =3D "AuthenticAMD" Id =3D 0x40ff2 Stepping =3D 2 >>>>> = Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR, >>>>> PG E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> >>>>> Features2=3D0x2001<SSE3,CX16> >>>>> AMD >>>>> Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> >>>>> AMD Features2=3D0x1d<LAHF,<b2>,<b3>,CR8> >>>>> real memory =3D 2146369536 (2046 MB) >>>>> avail memory =3D 2091245568 (1994 MB) >>>>> ACPI APIC Table: <Nvidia AWRDACPI> >>>>> ioapic0 <Version 1.1> irqs 0-23 on motherboard >>>>> acpi0: <Nvidia AWRDACPI> on motherboard >>>>> acpi_bus_number: can't get _ADR >>>>> acpi_bus_number: can't get _ADR >>>>> acpi_bus_number: can't get _ADR >>>>> acpi_bus_number: can't get _ADR >>>>> acpi0: Power Button (fixed) >>>>> acpi_bus_number: can't get _ADR >>>>> acpi_bus_number: can't get _ADR >>>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >>>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on = acpi0 >>>>> cpu0: <ACPI CPU> on acpi0 >>>>> acpi_button0: <Power Button> on acpi0 >>>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >>>>> pci0: <ACPI PCI bus> on pcib0 >>>>> pci0: <memory, RAM> at device 0.0 (no driver attached) >>>>> isab0: <PCI-ISA bridge> at device 1.0 on pci0 >>>>> isa0: <ISA bus> on isab0 >>>>> pci0: <serial bus, SMBus> at device 1.1 (no driver attached) >>>>> pci0: <memory, RAM> at device 1.2 (no driver attached) >>>>> ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq >>>>> 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] >>>>> usb0: OHCI version 1.0, legacy support >>>>> usb0: SMM does not respond, resetting >>>>> usb0: <OHCI (generic) USB controller> on ohci0 >>>>> usb0: USB revision 1.0 >>>>> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>>>> uhub0: 10 ports with 10 removable, self powered >>>>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff >>>>> irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] >>>>> usb1: EHCI version 1.0 >>>>> usb1: companion controller, 10 ports each: usb0 >>>>> usb1: <EHCI (generic) USB 2.0 controller> on ehci0 >>>>> usb1: USB revision 2.0 >>>>> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >>>>> uhub1: 10 ports with 10 removable, self powered >>>>> atapci0: <nVidia nForce MCP55 UDMA133 controller> port >>>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on >>>>> pci0 ata0: <ATA channel 0> on atapci0 >>>>> ata1: <ATA channel 1> on atapci0 >>>>> atapci1: <nVidia nForce MCP55 SATA300 controller> port >>>>> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem >>>>> 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel >>>>> 0> on atapci1 >>>>> ata3: <ATA channel 1> on atapci1 >>>>> atapci2: <nVidia nForce MCP55 SATA300 controller> port >>>>> 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem >>>>> 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel >>>>> 0> on atapci2 >>>>> ata5: <ATA channel 1> on atapci2 >>>>> atapci3: <nVidia nForce MCP55 SATA300 controller> port >>>>> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f >>>>> mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA >>>>> channel 0> on atapci3 >>>>> ata7: <ATA channel 1> on atapci3 >>>>> pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 >>>>> pci1: <ACPI PCI bus> on pcib1 >>>>> fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem >>>>> 0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on >>>>> pci1 miibus0: <MII bus> on fxp0 >>>>> inphy0: <i82555 10/100 media interface> on miibus0 >>>>> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>>>> fxp0: Ethernet address: 00:a0:c9:ce:11:26 >>>>> fwohci0: <Texas Instruments TSB43AB22/A> mem >>>>> 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on >>>>> pci1 >>>>> fwohci0: OHCI version 1.10 (ROM=3D1) >>>>> fwohci0: No. of Isochronous channels is 4. >>>>> fwohci0: EUI64 00:11:d8:00:00:c8:2b:85 >>>>> fwohci0: Phy 1394a available S400, 2 ports. >>>>> fwohci0: Link S400, max_rec 2048 bytes. >>>>> firewire0: <IEEE1394(FireWire) bus> on fwohci0 >>>>> fwe0: <Ethernet over FireWire> on firewire0 >>>>> if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85 >>>>> fwe0: Ethernet address: 02:11:d8:c8:2b:85 >>>>> fwe0: if_start running deferred for Giant >>>>> sbp0: <SBP-2/SCSI over FireWire> on firewire0 >>>>> fwohci0: Initiate bus reset >>>>> fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode >>>>> firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) >>>>> firewire0: bus manager 0 (me) >>>>> pci0: <multimedia> at device 6.1 (no driver attached) >>>>> nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem >>>>> 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq >>>>> 23 at device 8.0 on pci0 miibus1: <MII bus> on nfe0 >>>>> e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1 >>>>> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >>>>> 1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:86:aa:31 >>>>> nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem >>>>> 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq >>>>> 20 at device 9.0 on pci0 miibus2: <MII bus> on nfe1 >>>>> e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2 >>>>> e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >>>>> 1000baseTX-FDX, auto nfe1: Ethernet address: 00:17:31:86:b4:c6 >>>>> pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 >>>>> pci2: <ACPI PCI bus> on pcib2 >>>>> pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 >>>>> pci3: <ACPI PCI bus> on pcib3 >>>>> pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0 >>>>> pci4: <ACPI PCI bus> on pcib4 >>>>> pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0 >>>>> pci5: <ACPI PCI bus> on pcib5 >>>>> pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0 >>>>> pci6: <ACPI PCI bus> on pcib6 >>>>> atapci4: <JMicron JMB363 SATA300 controller> port >>>>> 0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f >>>>> mem 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 atapci4: AHCI >>>>> Version 01.00 controller with 2 ports detected >>>>> ata8: <ATA channel 0> on atapci4 >>>>> ata9: <ATA channel 1> on atapci4 >>>>> ata10: <ATA channel 2> on atapci4 >>>>> pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0 >>>>> pci7: <ACPI PCI bus> on pcib7 >>>>> nvidia0: <GeForce 6200 TurboCache(TM)> mem >>>>> 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq >>>>> 16 at device 0.0 on pci7 nvidia0: [GIANT-LOCKED] >>>>> acpi_tz0: <Thermal Zone> on acpi0 >>>>> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on >>>>> acpi0 fdc0: [FAST] >>>>> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 >>>>> on acpi0 sio0: type 16550A >>>>> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on = acpi0 >>>>> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode >>>>> ppbus0: <Parallel port bus> on ppc0 >>>>> ppi0: <Parallel I/O> on ppbus0 >>>>> lpt0: <Printer> on ppbus0 >>>>> lpt0: Interrupt-driven port >>>>> pmtimer0 on isa0 >>>>> orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on >>>>> isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >>>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >>>>> kbd0 at atkbd0 >>>>> atkbd0: [GIANT-LOCKED] >>>>> sc0: <System console> at flags 0x100 on isa0 >>>>> sc0: VGA <16 virtual consoles, flags=3D0x300> >>>>> sio1: configured irq 3 not in bitmap of probed irqs 0 >>>>> sio1: port may not be enabled >>>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >>>>> isa0 >>>>> ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass >>>>> 3/1 >>>>> kbd1 at ukbd0 >>>>> uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass >>>>> 3/1 >>>>> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass >>>>> 3/1 >>>>> ums0: 6 buttons and Z dir. >>>>> Timecounter "TSC" frequency 2210201999 Hz quality 800 >>>>> Timecounters tick every 0.801 msec >>>>> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding >>>>> disabled, default to accept, logging disabled ad0: 152627MB <Seagate >>>>> ST3160212A 3.AAJ> at ata0-master UDMA100 acd0: DVDR <Optiarc DVD RW >>>>> AD-5170A/1.11> at ata0-slave UDMA66 >>>>> cd0 at ata0 bus 0 target 1 lun 0 >>>>> cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device >>>>> cd0: 66.000MB/s transfers >>>>> cd0: Attempt to query device size failed: NOT READY, Medium not >>>>> present Trying to mount root from ufs:/dev/ad0s1a >>>>> >>>>> >>>>> = ---------------------------------------------------------------------- >>>>> -- >>>>> >>>>> _______________________________________________ >>>>> freebsd-hardware@freebsd.org mailing list >>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware >>>>> To unsubscribe, send any mail to >>>>> "freebsd-hardware-unsubscribe@freebsd.org" >>> >>> >>> >>> > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?865782382FCBDD7AC2E525C7>