Date: Sun, 28 Feb 2021 12:40:25 -0800 From: Carl Johnson <carlj@peak.org> To: freebsd-stable@freebsd.org Subject: Re: Rasberry Pi 4 has no USB Message-ID: <86sg5g53k6.fsf@bay.localnet> In-Reply-To: <20210228203542.02d8435c12a4da34d59dac71@bidouilliste.com> (Emmanuel Vadot's message of "Sun, 28 Feb 2021 20:35:42 %2B0100") References: <868s786r40.fsf@bay.localnet> <20210228203542.02d8435c12a4da34d59dac71@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Emmanuel Vadot <manu@bidouilliste.com> writes: > On Sun, 28 Feb 2021 09:26:23 -0800 > Carl Johnson <carlj@peak.org> wrote: > >> I have an 8GB RPi 4B that I am trying out, but it has no USB response at >> all. That means that I can't use a keyboard or mouse, but I can use a >> serial console and ethernet. I can plug any USB device into any port, >> but there is nothing logged in /var/messages. Running usbconfig as root >> just reports 'No device match or lack of permissions'. Running >> 'dmesg | grep -i usb' reports only the following lines: >> >> usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 >> bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at device 0.0 on pci2 >> usb_needs_explore_all: no devclass >> >> Running 'pciconf -lv' shows there is a VL805 USB controller present. I >> tested this with Linux and everything worked properly. This is a new >> computer that I bought only a couple of weeks ago. Does anybody have >> any ideas on what this might be, or what I could do to try to figure it >> out? >> >> Thanks in advance for any ideas. >> -- >> Carl Johnson carlj@peak.org >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > > Hello, > > This is known, see > https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252971#c25 > > I wanted to wait that a tag was created on the rpi-firmware github > repo but it seems that they don't want to so I'll update the port next > week so RC1 will have the updated firmware. > > Cheers, Thank you very much for that! I will test that as soon as it comes out. -- Carl Johnson carlj@peak.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86sg5g53k6.fsf>