Date: 06 Sep 1999 01:37:10 +0200 From: Eric Jacoboni <jaco@titine.fr.eu.org> To: FreeBSD-mobile@FreeBSD.ORG Subject: Re: Configuring PCMCIA NIC after it's loaded Message-ID: <87r9kdnd5l.fsf@titine.fr.eu.org> In-Reply-To: "Chris D. Faulhaber"'s message of "Sun, 5 Sep 1999 18:44:18 -0400 (EDT)" References: <Pine.BSF.4.10.9909051842080.90049-100000@pawn.primelocation.net>
next in thread | previous in thread | raw e-mail | index | archive | help
"Chris D. Faulhaber" <jedgar@fxp.org> writes: > Try putting the commands in /etc/pccard.conf in an 'insert' line: > > card "<MANUFACTURER>" "<CARD VERSION>" > config <stuff goes here> > insert kldload /lkm/setmac.ko > insert /usr/local/sbin/setmac ep0 <blah> > insert /etc/pccard_ether ep0 Oh no ! If i try this, my laptop resets at boot times after having loaded pccard and without unmount / :( The pb seems that these lines are called _before_ ep0 is up. I can get the same pb if i forget to make a 'ifconfig ep0 down' before the 'setmac ep0 blah'... or even if ep0 is not yet configured. It's _very_ important that 'setmac ep0 blah' is called _after_ ep0 is down, and ep0 can be down only _after_ pccard has done is job (as long i've understood this process). With your solution, it seems that, when setmac is called, ep0 is not yet configured (/var/log/messages says 'ep0: no such device'). Anyway, thanks for your help, i'm still searching... -- --------------------------------------------------------- Éric Jacoboni « No sport, cigars! » (W. Churchill) --------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?87r9kdnd5l.fsf>