Date: Wed, 12 Jul 2000 10:54:56 +0200 From: Steffen Hansen <Steffen.Hansen@dba.dk> To: "'aic7xxx@freebsd.org'" <aic7xxx@freebsd.org> Subject: Problems with Adaptec 29160..... Message-ID: <8C481B317D91D31191E400600862AB1808DED2@DBAMAIL>
next in thread | raw e-mail | index | archive | help
Hi.... And btw. I'm new so bear with me.... I'm trying to install a new Linux RH6.2/Oracle=20 server with an Adaptec 29160 controller. So far there's only two IBM18.5Gig drives attached to the controller, but more will follow. The installation of RH6.2 causes no problems, but when RH6.2 boots the std. SMP kernel, the following messages appears when the Adaptec driver loads : ------------------------------------------------------------------------= ---- (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI = 0/16/0 (scsi0) Wide Channel, SCSI ID=3D7, 32/255 SCBs (scsi0) Downloaded sequencer code... 392 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> scsi : 1 host scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, = lun 0 In quiry 00 00 00 ff 00 (scsi0) BRKADRINT error (0xff): Illegal Host Access Illegal Sequencer address referenced Illegal Opcode in sequencer program Sequencer Ram Parity Error Data-Path Ram Parity Error Scratch Ram/SCB Array Ram Parity Error PCI Error detected CIOBUS Parity Error (scsi0) SEQADDR=3D0x1ff Kernel panic: aic7xxx: unrecoverable BRKADRINT In interrupt handler - not syncing ------------------------------------------------------------------------= ---- This happens with the std. SMP kernel as well as with Kernel 2.4.0-test1/2 The driver version in the 2.2.14 kernel is 5.1.28 and 2.4.0 reports 5.2.1... It does NOT however die when using the linux-up kernel that comes with RH6.2..... I hope that you're able to help me... Kindest regards and tanx in advance.. Steffen Hansen Den Bl=E5 Avis A/S, Denmark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8C481B317D91D31191E400600862AB1808DED2>