Date: Sat, 27 Apr 2019 13:19:49 +0200 From: Jakob Alvermark <jakob@alvermark.net> To: Johannes Lundberg <johalun0@gmail.com>, x11@freebsd.org Subject: Re: drm-current-kmod-4.16.g20190424 hangs Message-ID: <8dcf1fed-8f89-3e11-5fe1-b3a72e6971b0@alvermark.net> In-Reply-To: <12e450ab-2c17-11e3-ba47-20599c38f3a3@gmail.com> References: <5713985b-e97f-c7f2-2592-47a17baf8095@alvermark.net> <12e450ab-2c17-11e3-ba47-20599c38f3a3@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Yes, here it is: ---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #194 r346736M: Fri Apr 26 12:26:20 CEST 2019 root@flyer:/usr/obj/usr/src/amd64.amd64/sys/FLYER amd64 FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0) VT(efifb): resolution 1366x768 CPU: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz (2166.72-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8120422400 (7744 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) __stack_chk_init: WARNING: Initializing stack protection with non-random cookies! __stack_chk_init: WARNING: This severely limits the benefit of -fstack-protector! ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-86 on motherboard Launching APs: 2 3 1 Timecounter "TSC-low" frequency 1083359667 Hz quality 1000 Cuse v0.1.36 @ /dev/cuse random: entropy device external interface kbd1 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xffffffff81150570, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" 000.000049 [4254] netmap_init netmap: loaded module [ath_hal] loaded nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 109fffff vs 10a00000 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x2050-0x2057 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0x2048-0x204f,0x205c-0x205f,0x2040-0x2047,0x2058-0x205b,0x2020-0x203f mem 0x9091e000-0x9091e7ff at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 xhci0: <Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel BayTrail HDA Controller> mem 0x90910000-0x90913fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pcib2: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Advanced 6235> mem 0x90600000-0x90601fff at device 0.0 on pci1 arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib3: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x90500000-0x90500fff,0x90400000-0x90403fff at device 0.0 on pci2 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: c4:54:44:d6:95:39 re0: netmap queues/slots: TX 1/256, RX 1/256 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 gpio0: <Intel Baytrail GPIO Controller> iomem 0xfed0c000-0xfed0cfff irq 49 on acpi0 gpiobus0: <GPIO bus> on gpio0 gpioc0: <GPIO controller> on gpio0 gpio1: <Intel Baytrail GPIO Controller> iomem 0xfed0d000-0xfed0dfff irq 48 on acpi0 gpiobus1: <GPIO bus> on gpio1 gpioc1: <GPIO controller> on gpio1 gpio2: <Intel Baytrail GPIO Controller> iomem 0xfed0e000-0xfed0efff irq 50 on acpi0 gpiobus2: <GPIO bus> on gpio2 gpioc2: <GPIO controller> on gpio2 sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x90a02000-0x90a02fff irq 44 on acpi0 mmc0: <MMC/SD bus> on sdhci_acpi0 sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x90a00000-0x90a00fff irq 47 on acpi0 ig4iic_acpi0: <Designware I2C Controller> iomem 0x90a07000-0x90a07fff irq 32 on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0 hdaa0: Coef 0x06 val 0x2100 -> 0x2100 hdaa0: Coef 0x45 val 0xc429 -> 0xd429 hdaa0: Coef 0x1b val 0x080b -> 0x0c2b hdaa0: Coef 0x32 val 0x4ea3 -> 0x4ea3 pcm0: <Realtek ALC283 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 hdacc1: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG MZ7PD128HCFV-000H1 DXM01H0Q> ACS-2 ATA SATA 3.x device ada0: Serial Number S1MBNSAFA22012 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> mmc0: No compatible cards found on bus iicbus0: <Philips I2C bus> on ig4iic_acpi0 iicsmb0: <SMBus over I2C bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 Trying to mount root from zfs:flyer2/ROOT/default []... Root mount waiting for: usbus0 uhub0: 7 ports with 7 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0 uhub1: 4 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x8087 product 0x07da> at usbus0 Root mount waiting for: usbus0 ugen0.4: <Cisco-Linksys Compact Wireless-G USB Adapter> at usbus0 ugen0.5: <SunplusIT INC. HD WebCam> at usbus0 random: unblocking device. [drm:drm_core_init] Initialized drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io [drm:intel_detect_pch] No PCH found. [drm:get_allowed_dc_mask] Allowed DC state mask 00 [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [drm:gen6_check_for_fifo_debug] GTFIFODBG = 0x0810 [drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore init, clearing [drm:intel_sanitize_options] ppgtt mode: 1 [drm:intel_uc_sanitize_options] enable_guc=0 (submission:no huc:no) [drm:i915_ggtt_probe_hw] GGTT size = 2048M [drm:i915_ggtt_probe_hw] GMADR size = 256M [drm:i915_ggtt_probe_hw] DSM size = 64M Successfully added WC MTRR for [0x80000000-0x8fffffff]: 0; [drm] Got stolen memory base 0x7b000000, size 0x4000000 [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 65536K [drm:intel_opregion_setup] graphic opregion physical addr: 0x7885f018 [drm:intel_opregion_setup] Public ACPI methods supported [drm:intel_opregion_setup] ASLE supported [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [drm:intel_bios_init] VBT signature "$VBT VALLEYVIEW ", BDB version 181 [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [drm:parse_lfp_panel_data] Panel type: 12 (VBT) [drm:parse_lfp_panel_data] DRRS supported mode is static [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 500 Hz, active high, min brightness 20, level 255, controller 0 [drm:parse_driver_features] DRRS State Enabled:1 [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [drm:intel_update_rawclk] rawclk rate: 200000 kHz [drm:intel_power_well_enable] enabling always-on [drm:intel_power_well_enable] enabling display [drm:intel_power_well_enable] enabling dpio-tx-b-01 [drm:intel_power_well_enable] enabling dpio-tx-b-23 [drm:intel_power_well_enable] enabling dpio-tx-c-01 [drm:intel_power_well_enable] enabling dpio-tx-c-23 [drm:intel_power_well_enable] enabling dpio-common [drm:drm_irq_install] irq=65535 [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_czclk] CZ clock rate: 333333 kHz [drm:intel_dump_cdclk_state] Current CDCLK 333333 kHz, VCO 2000000 kHz, ref 0 kHz, voltage level 2 [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz [drm] Connector VGA-1: get mode from tunables: [drm] - kern.vt.fb.modes.VGA-1 [drm] - kern.vt.fb.default_mode [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port B [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm:intel_aux_port] using AUX B for port B (platform default) [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm:intel_hdmi_ddc_pin] Using DDC pin 0x5 for port B (platform default) [drm:intel_dp_init_connector] Adding eDP connector on port C [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode [drm:intel_aux_port] using AUX C for port C (platform default) [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe A [drm:intel_pps_dump_state] cur t1_t3 2600 t8 300 t9 2600 t10 500 t11_t12 6000 [drm:intel_pps_dump_state] vbt t1_t3 2600 t8 300 t9 2600 t10 500 t11_t12 6000 [drm:intel_dp_init_panel_power_sequencer] panel power up delay 260, power down delay 50, power cycle delay 600 [drm:intel_dp_init_panel_power_sequencer] backlight on delay 30, off delay 260 [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x8a280001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [drm:edp_panel_vdd_on] Turning eDP port C VDD on [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [drm:intel_dp_read_dpcd] DPCD: fffff8000ecd3133h [drm:drm_dp_read_desc] DP sink: OUI fffff8000ecd31bchD dev-ID 0xfffff8000ecd31bfE HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [drm:intel_edp_init_dpcd] eDP DPCD: fffff8000ecd3154h [drm:drm_edid_to_eld] ELD: no CEA Extension found [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. [drm:intel_dp_drrs_init] VBT doesn't support DRRS [drm:intel_edp_init_connector] using pipe A for initial backlight setup [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 3125/3125 [drm:intel_dsi_init] [drm:intel_set_plane_visible] pipe A active planes 0x1 [drm:intel_modeset_readout_hw_state] [CRTC:40:pipe A] hw state readout: enabled [drm:intel_set_plane_visible] pipe B active planes 0x0 [drm:intel_modeset_readout_hw_state] [CRTC:53:pipe B] hw state readout: disabled [drm:intel_modeset_readout_hw_state] [ENCODER:55:CRT] hw state readout: disabled, pipe A [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP B] hw state readout: disabled, pipe A [drm:intel_modeset_readout_hw_state] [ENCODER:60:HDMI B] hw state readout: disabled, pipe A [drm:intel_modeset_readout_hw_state] [ENCODER:63:DP C] hw state readout: enabled, pipe A [drm:intel_modeset_readout_hw_state] [CONNECTOR:64:eDP-1] hw state readout: enabled [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:VGA-1] hw state readout: disabled [drm:intel_modeset_readout_hw_state] [CONNECTOR:57:DP-1] hw state readout: disabled [drm:intel_modeset_readout_hw_state] [CONNECTOR:61:HDMI-A-1] hw state readout: disabled [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1366x768] for CRTC state 0xfffff8000ecc4800 [drm:drm_calc_timestamping_constants] crtc 40: hwmode: htotal 1592, vtotal 798, vdisplay 768 [drm:drm_calc_timestamping_constants] crtc 40: clock 76299 kHz framedur 16650493 linedur 20865 [drm:drm_crtc_vblank_on] crtc 0, vblank enabled 0, inmodeset 1 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,257)@ 7.731900 -> 7.726537 [e 0 us, 0 rep] [drm:intel_dump_pipe_config] [CRTC:40:pipe A][setup_hw_state] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, dithering: 0 [drm:intel_dump_m_n_config] dp m_n: lanes: 1; gmch_m: 5333756, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76299 1366 1404 1426 1592 768 771 777 798 0x40 0xa [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76299 1366 1404 1426 1592 768 771 777 798 0x40 0xa [drm:intel_dump_crtc_timings] crtc timings: 76299 1366 1404 1426 1592 768 771 777 798, type: 0x40 flags: 0xa [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1366x768, pixel rate 76299 [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:intel_dpll_dump_hw_state] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:34:sprite B] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:37:cursor A] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [CRTC:53:pipe B][setup_hw_state] [drm:intel_dump_pipe_config] output_types: (0x0) [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:intel_dpll_dump_hw_state] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:41:primary B] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:44:sprite C] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:47:sprite D] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:50:cursor B] disabled, scaler_id = 0 [drm:drm_mode_object_get] OBJ ID: 64 (2) [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=1 [drm:i9xx_get_initial_plane_config] pipe A/primary A with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0xfffffe0053aa3390a, gtt_offset=0xfffffe0053aa3398a, size=0xfffffe0053aa33a0a [drm:intel_alloc_initial_plane_obj] initial plane fb obj 0xfffff8000ecda600 [drm:drm_mode_object_get] OBJ ID: 70 (1) [drm:intel_set_plane_visible] pipe A active planes 0x1 [drm:i915_gem_init_ggtt] clearing unused GTT space: [409000, 80000000] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fe00 [drm:gen6_ppgtt_init] Adding PPGTT at offset 7fe00000 [drm:i915_gem_contexts_init] logical context support initialized [drm:init_status_page] rcs0 hws offset: 0x00409000 [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fdfd000 [drm:init_status_page] bcs0 hws offset: 0x0042a000 [drm:init_status_page] vcs0 hws offset: 0x0044b000 [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0xfffffe0053aa33e0a, gtt_offset=0xfffffe0053aa33e8a, size=0xfffffe0053aa33f0a [drm:valleyview_setup_pctx] PCBR: 0x7eefa001 [drm:vlv_init_gpll_ref_freq] GPLL reference freq: 20833 kHz [drm:valleyview_init_gt_powersave] DDR speed: 1333 MHz [drm:valleyview_init_gt_powersave] max GPU freq: 896 MHz (226) [drm:valleyview_init_gt_powersave] RPe GPU freq: 646 MHz (214) [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: 312 MHz (198) [drm:valleyview_init_gt_powersave] min GPU freq: 187 MHz (192) [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0 [drm:valleyview_enable_rps] GPLL enabled? yes [drm:valleyview_enable_rps] GPU status: 0x0000c6d0 [drm:intel_fbdev_init_bios] found possible fb from plane A [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [drm:intel_fbdev_init_bios] pipe A area: 1366x768, bpp: 32, size: 4227072 [drm:intel_fbdev_init_bios] fb big enough for plane A (4227072 >= 4227072) [drm:intel_fbdev_init_bios] pipe B not active, skipping [drm:drm_mode_object_get] OBJ ID: 70 (2) [drm:intel_fbdev_init_bios] using BIOS fb for initial console [drm:drm_mode_object_get] OBJ ID: 64 (3) [drm:drm_mode_object_get] OBJ ID: 54 (2) [drm:drm_mode_object_get] OBJ ID: 57 (2) [drm:drm_mode_object_get] OBJ ID: 61 (2) [drm:drm_minor_register] [drm:drm_minor_register] new minor registered 128 [drm:drm_minor_register] [drm:drm_minor_register] new minor registered 0 [drm:drm_sysfs_connector_add] adding "eDP-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-eDP-1 [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-C] registered as minor 0 [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:drm_sysfs_connector_add] adding "DP-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1 [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-B] registered as minor 1 [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [drm:intel_didl_outputs] 4 outputs detected i915 device info: 0xfffffe0053aa3470V [drm:drm_setup_crtcs] i915 device info: 0xfffffe0053aa3480V i915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480V [drm:drm_helper_probe_single_connector_modes] i915 device info: 0xfffffe0053aa3480V [CONNECTOR:64:eDP-1] [drm:intel_dp_detect] [CONNECTOR:64:eDP-1] i915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480V [drm:intel_dp_print_rates] i915 device info: 0xfffffe0053aa3480V source rates: 162000, 270000 i915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480V [drm:intel_dp_print_rates] sink rates: 162000, 270000 [drm:intel_dp_print_rates] i915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa34b0Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480V common rates: 162000, 270000 i915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa3480Vi915 device info: 0xfffffe0053aa34b0V [drm:drm_dp_read_desc] DP sink: OUI fffff8000ecd31bchD dev-ID 0xfffff8000ecd31bfE HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:eDP-1] status updated from unknown to connected [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. [drm:drm_sysfs_hotplug_event] [drm:drm_mode_object_put] generating hotplug event OBJ ID: 66 (1) [drm:drm_edid_to_eld] ELD: no CEA Extension found [drm:drm_add_display_info] non_desktop set to 0 [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:eDP-1] probed modes : [drm:drm_mode_debug_printmodeline] Modeline 65:"1366x768" 60 76300 1366 1404 1426 1592 768 771 777 798 0x48 0xa [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:VGA-1] [drm:intel_crt_detect] [CONNECTOR:54:VGA-1] force=1 [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0 [drm:intel_crt_detect] CRT not detected via hotplug ichwd0: <Intel Bay Trail SoC watchdog timer> on isa0 [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:VGA-1] status updated from unknown to disconnected [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:VGA-1] disconnected [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:DP-1] [drm:intel_dp_detect] [CONNECTOR:57:DP-1] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:DP-1] status updated from unknown to disconnected [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:DP-1] disconnected [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:HDMI-A-1] [drm:intel_hdmi_detect] [CONNECTOR:61:HDMI-A-1] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: 0xfffffe0053ae27e0E (err -6) [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:HDMI-A-1] status updated from unknown to disconnected [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:61:HDMI-A-1] disconnected [drm:drm_enable_connectors] connector 64 enabled? yes [drm:drm_enable_connectors] connector 54 enabled? no [drm:drm_enable_connectors] connector 57 enabled? no [drm:drm_enable_connectors] connector 61 enabled? no [drm:intel_fb_initial_config] Not using firmware configuration [drm:drm_target_preferred] looking for cmdline mode on connector 64 [drm:drm_target_preferred] looking for preferred mode on connector 64 0 [drm:drm_target_preferred] found mode 1366x768 [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 40 (0,0) [drm:drm_mode_object_get] OBJ ID: 64 (3) [drm:intelfb_create] re-using BIOS fb [drm:intelfb_create] allocated 1366x768 fb: 0x00000000 VT: Replacing driver "efifb" with new "fb". [drm:drm_atomic_state_init] Allocated atomic state 0xfffff80004d04000 [drm:drm_mode_object_get] OBJ ID: 70 (3) [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] 0xfffff80004cffa00 state to 0xfffff80004d04000 [drm:drm_mode_object_get] OBJ ID: 69 (1) [drm:drm_atomic_get_crtc_state] Added [CRTC:40:pipe A] 0xfffff8000ea5b000 state to 0xfffff80004d04000 [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] 0xfffff80004cff900 state to 0xfffff80004d04000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff900 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff900 [drm:drm_atomic_get_plane_state] Added [PLANE:34:sprite B] 0xfffff80004cff800 state to 0xfffff80004d04000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff800 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff800 [drm:drm_atomic_get_plane_state] Added [PLANE:37:cursor A] 0xfffff80004cff700 state to 0xfffff80004d04000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff700 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff700 [drm:drm_atomic_get_plane_state] Added [PLANE:41:primary B] 0xfffff80004cff600 state to 0xfffff80004d04000 [drm:drm_atomic_get_plane_state] Added [PLANE:44:sprite C] 0xfffff80004cff500 state to 0xfffff80004d04000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff500 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff500 [drm:drm_atomic_get_plane_state] Added [PLANE:47:sprite D] 0xfffff80004cff400 state to 0xfffff80004d04000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff400 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff400 [drm:drm_atomic_get_plane_state] Added [PLANE:50:cursor B] 0xfffff80004cff300 state to 0xfffff80004d04000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff300 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff300 [drm:drm_mode_object_put] OBJ ID: 69 (2) [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1366x768] for CRTC state 0xfffff8000ea5b000 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cffa00 to [CRTC:40:pipe A] [drm:drm_atomic_set_fb_for_plane] Set [FB:70] for plane state 0xfffff80004cffa00 [drm:drm_mode_object_get] OBJ ID: 70 (4) [drm:drm_mode_object_put] OBJ ID: 70 (5) [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:40:pipe A] to 0xfffff80004d04000 [drm:drm_mode_object_get] OBJ ID: 64 (5) [drm:drm_mode_object_get] OBJ ID: 64 (6) [drm:drm_atomic_get_connector_state] Added [CONNECTOR:64:eDP-1] 0xfffff80004d99a00 state to 0xfffff80004d04000 [drm:drm_mode_object_put] OBJ ID: 64 (6) [drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80004d99a00 to [NOCRTC] [drm:drm_mode_object_get] OBJ ID: 64 (5) [drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80004d99a00 to [CRTC:40:pipe A] [drm:drm_atomic_get_crtc_state] Added [CRTC:53:pipe B] 0xfffff8000eccb800 state to 0xfffff80004d04000 [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000eccb800 [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004cff600 to [NOCRTC] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004cff600 [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:53:pipe B] to 0xfffff80004d04000 [drm:drm_atomic_check_only] checking 0xfffff80004d04000 [drm:update_connector_routing] Updating routing for [CONNECTOR:64:eDP-1] [drm:update_connector_routing] [CONNECTOR:64:eDP-1] keeps [ENCODER:63:DP C], now on [CRTC:40:pipe A] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:40:pipe A] to 0xfffff80004d04000 [drm:connected_sink_compute_bpp] [CONNECTOR:64:eDP-1] checking for sink bpp constrains [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to EDID reported max of 18 [drm:drm_mode_debug_printmodeline] Modeline 67:"1366x768" 60 76300 1366 1404 1426 1592 768 771 777 798 0x48 0xa [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 76300KHz [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18 [drm:intel_dp_compute_config] DP link bw required 171675 available 270000 [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1 [drm:intel_dump_pipe_config] [CRTC:40:pipe A][modeset] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, dithering: 1 [drm:intel_dump_m_n_config] dp m_n: lanes: 1; gmch_m: 2666878, gmch_n: 4194304, link_m: 148159, link_n: 524288, tu: 64 [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [drm:intel_dump_pipe_config] requested mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1404 1426 1592 768 771 777 798 0x48 0xa [drm:intel_dump_pipe_config] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76300 1366 1404 1426 1592 768 771 777 798 0x48 0xa [drm:intel_dump_crtc_timings] crtc timings: 76300 1366 1404 1426 1592 768 771 777 798, type: 0x48 flags: 0xa [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1366x768, pixel rate 76300 [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [drm:intel_dpll_dump_hw_state] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] [PLANE:28:primary A] FB:70, fb = 1366x768 format = XR24 little-endian (0x34325258) [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:34:sprite B] disabled, scaler_id = 0 [drm:intel_dump_pipe_config] [PLANE:37:cursor A] disabled, scaler_id = 0 [drm:intel_modeset_checks] New cdclk calculated to be logical 266667 kHz, actual 266667 kHz [drm:intel_modeset_checks] New voltage level calculated to be logical 1, actual 1 [drm:intel_plane_atomic_calc_changes] [CRTC:40:pipe A] has [PLANE:28:primary A] with fb 70 [drm:intel_plane_atomic_calc_changes] [PLANE:28:primary A] visible 1 -> 1, off 1, on 1, ms 1 [drm:vlv_raw_plane_wm_compute] primary A watermarks: PM2=86, PM5=0, DDR DVFS=0 [drm:drm_atomic_commit] committing 0xfffff80004d04000 [drm:_intel_set_memory_cxsr] memory self-refresh is disabled (was enabled) [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,85)@ 7.844901 -> 7.843127 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=1, diff=7, hw=1097 hw_last=1090 start FB_INFO: type=11 height=768 width=1366 depth=32 cmsize=16 size=4227072 pbase=0x80000000 vbase=0xfffff80080000000 name=drmn0 flags=0x0 stride=5504 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 7.860025 -> 7.860651 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=8, diff=1, hw=1098 hw_last=1097 [drm:intel_edp_backlight_off] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 7.876713 -> 7.877339 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=9, diff=1, hw=1099 hw_last=1098 [drm:vblank_disable_fn] disabling vblank on crtc 0 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-26)@ 7.876713 -> 7.877256 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=10, diff=0, hw=1099 hw_last=1099 wlan0: Ethernet address: 80:00:0b:5a:cd:23 [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:edp_panel_off] Turn eDP port C panel power off [drm:wait_panel_off] Wait for panel power off time [drm:wait_panel_status] mask b0000000 value 00000000 status c0000008 control abcd0000 lo0: link state changed to UP [drm:wait_panel_status] Wait complete [drm:drm_crtc_vblank_off] crtc 0, vblank enabled 0, inmodeset 0 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,144)@ 8.163899 -> 8.160894 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=10, diff=17, hw=1116 hw_last=1099 [drm:intel_disable_pipe] disabling pipe A [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [drm:intel_hpd_irq_handler] digital hpd port C - long [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 0 [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [drm:intel_dp_link_down] [drm:drm_calc_timestamping_constants] crtc 40: hwmode: htotal 1592, vtotal 798, vdisplay 768 [drm:drm_calc_timestamping_constants] crtc 40: clock 76300 kHz framedur 16650275 linedur 20865 [drm:intel_dump_cdclk_state] Changing CDCLK to 266667 kHz, VCO 2000000 kHz, ref 0 kHz, voltage level 1 [drm:verify_encoder_state] [ENCODER:55:CRT] [drm:verify_encoder_state] [ENCODER:56:DP B] [drm:verify_encoder_state] [ENCODER:60:HDMI B] [drm:verify_encoder_state] [ENCODER:63:DP C] [drm:vlv_steal_power_sequencer] stealing pipe A power sequencer from port C [drm:vlv_detach_power_sequencer] detaching pipe A power sequencer from port C [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x8a280001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [drm:_intel_dp_set_link_train] Using DP training pattern TPS1 [drm:edp_panel_vdd_on] Turning eDP port C VDD on [drm:wait_panel_power_cycle] Wait for panel power cycle iwn0: iwn_read_firmware: ucode rev=0x12a80601 [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [drm:wait_panel_status] Wait complete [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [drm:intel_get_hpd_pins] hotplug event received, stat 0x00100000, dig 0x00100000, pins 0x00000040 [drm:intel_hpd_irq_handler] digital hpd port C - long [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 6 - cnt: 1 [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [drm:edp_panel_on] Turn eDP port C panel power on [drm:wait_panel_power_cycle] Wait for panel power cycle [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [drm:wait_panel_status] Wait complete [drm:wait_panel_on] Wait for panel power on [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b [drm:wait_panel_status] Wait complete [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [drm:edp_panel_vdd_on] Turning eDP port C VDD on [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [drm:intel_dp_set_signal_levels] Using vswing level 0 [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [drm:_intel_dp_set_link_train] Using DP training pattern TPS1 [drm:intel_dp_link_training_clock_recovery] clock recovery OK [drm:_intel_dp_set_link_train] Using DP training pattern TPS2 [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [drm:intel_dp_start_link_train] [CONNECTOR:64:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 1[drm:intel_enable_pipe] enabling pipe A [drm:drm_crtc_vblank_on] crtc 0, vblank enabled 0, inmodeset 1 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 9.245011 -> 9.245637 [e 0 us, 0 rep] [drm:intel_edp_backlight_on] [drm:intel_panel_enable_backlight] pipe A [drm:intel_panel_actually_set_backlight] set backlight PWM = 3125 [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,557)@ 9.274648 -> 9.263027 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=28, diff=1, hw=1118 hw_last=1117 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,560)@ 9.274648 -> 9.262964 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=29, diff=0, hw=1118 hw_last=1118 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 9.279091 -> 9.279717 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=29, diff=1, hw=1119 hw_last=1118 [drm:drm_handle_vblank_events] vblank event on 30, current 30 [drm:_intel_set_memory_cxsr] memory self-refresh is enabled (was disabled) [drm:intel_connector_verify_state] [CONNECTOR:64:eDP-1] [drm:drm_mode_object_put] OBJ ID: 69 (1) [drm:verify_crtc_state] [CRTC:40:pipe A] [drm:drm_mode_object_get] OBJ ID: 70 (4) [drm:drm_mode_object_put] OBJ ID: 70 (5) [drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff80004d04000 [drm:drm_mode_object_put] OBJ ID: 64 (6) [drm:drm_mode_object_put] OBJ ID: 64 (5) [drm:drm_mode_object_put] OBJ ID: 70 (4) [drm:__drm_atomic_state_free] Freeing atomic state 0xfffff80004d04000 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-30)@ 9.295783 -> 9.296409 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=30, diff=1, hw=1120 hw_last=1119 [drm:vblank_disable_fn] disabling vblank on crtc 0 [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-26)@ 9.295783 -> 9.296325 [e 0 us, 0 rep] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=31, diff=0, hw=1120 hw_last=1120 re0: link state changed to DOWN wlan0: link state changed to UP ubt0 on uhub1 ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 2> on usbus0 rum0 on uhub1 rum0: <Cisco-Linksys Compact Wireless-G USB Adapter, class 0/0, rev 2.00/0.01, addr 3> on usbus0 [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ubt0: ubt_bulk_read_callback:979: bulk-in transfer failed: USB_ERR_STALLED wlan1: Ethernet address: 00:18:f8:34:d2:8d wlan1: link state changed to UP . . Security policy loaded: MAC/ntpd (mac_ntpd) . [drm] GPU HANG: ecode 7:0:0x00090908, in Xorg [100467], reason: Hang on rcs0, action: reset drmn0: Resetting chip after gpu hang drmn0: i915_reset_device timed out, cancelling all in-flight rendering. . At this point the only thing I can do is pressing the power button to shutdown the machine. Jakob On 2019-04-27 02:17, Johannes Lundberg wrote: > Hi > > Hmm, tested on my Cherrytrail now and it runs fine with fresh kernel and > drm-current-kmod. But, it doesn't have DMAR. > > Can you share again dmesg output with this in /boot/loader.conf > > dev.drm.drm_debug=-1 > > ? > > > On 4/26/19 5:00 AM, Jakob Alvermark wrote: >> Hi, >> >> >> When I upgraded -current to r346730 drm-current-kmod-4.16.g20190323 >> wouldn't load, "device_attach: drmn0 attach returned 19" >> >> So I upgraded drm-current-kmod to 4.16.g20190424. >> >> It loads fine, but shortly after starting Xorg the screen freezes. >> >> The only way out is pressing the power button, it shuts down cleanly. >> >> /var/log/messages shows this: >> >> kernel: [drm] GPU HANG: ecode 7:0:0x60ac6ee9, in Xorg [100385], >> reason: Hang on rcs0, action: reset >> kernel: drmn0: Resetting chip after gpu hang >> syslogd: last message repeated 1 times >> kernel: drmn0: i915_reset_device timed out, cancelling all in-flight >> rendering. >> kernel: . >> >> Tried once more, same thing happened: >> >> kernel: [drm] GPU HANG: ecode 7:0:0x86f2fffd, in Xorg [100491], >> reason: Hang on rcs0, action: reset >> kernel: drmn0: Resetting chip after gpu hang >> syslogd: last message repeated 1 times >> kernel: drmn0: i915_reset_device timed out, cancelling all in-flight >> rendering. >> kernel: . >> >> Reverting back to drm-current-kmod-4.16.g20190323 and -current to >> r346593 (yay boot environments!) it is stable. >> >> This is on a laptop with CPU: Intel(R) Pentium(R) CPU N3540 @ >> 2.16GHz (2166.72-MHz K8-class CPU) >> Baytrail graphics. >> >> >> Jakob >> >> _______________________________________________ >> freebsd-x11@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-x11 >> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8dcf1fed-8f89-3e11-5fe1-b3a72e6971b0>