Date: Thu, 19 Nov 2009 17:36:42 +0200 From: "Thodoris S." <thodoriss@gmail.com> To: freebsd-net@freebsd.org Subject: MPD Multiple PPPoE to same ISP Message-ID: <927edfce0911190736r3f202001h2082052b7922c723@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I am trying to make Multiple PPPoE Connections to the Same ISP for
Load Balancing reasons
my mpd.conf is:
default:
load adsl0
load adsl1
load adsl2
adsl0:
new -i ng0 pppoe0 pppoe0
set iface route default
set iface disable on-demand
set iface idle 0
set bundle disable multilink
set bundle authname "***"
set bundle password "***"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
open
adsl1:
new -i ng1 pppoe1 pppoe1
set iface route default
set iface disable on-demand
set iface idle 0
set bundle disable multilink
set bundle authname "***"
set bundle password "***"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
open
adsl2:
new -i ng2 pppoe2 pppoe2
set iface route default
set iface disable on-demand
set iface idle 0
set bundle disable multilink
set bundle authname "***"
set bundle password "***"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
open
And mpd.links is:
pppoe0:
set link type pppoe
set pppoe iface em0
set pppoe service "we"
set pppoe enable originate
set pppoe disable incoming
pppoe1:
set link type pppoe
set pppoe iface em1
set pppoe service "we1"
set pppoe enable originate
set pppoe disable incoming
pppoe2:
set link type pppoe
set pppoe iface bce1
set pppoe service "we2"
set pppoe enable originate
set pppoe disable incoming
The problem is tha only one (the first logged in) ng interface gets ip
assigned to it, all others assigned to lo0 interface
and when i am trying to NAT them with PF it gives me this error:
/etc/pf.conf:26: could not parse host specification
im giving you ifconfig and netstat -nr
ifconfig:
[root@emperor ~]# ifconfig
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1e:c9:db:24:7f
inet 192.168.0.1 netmask 0xfffffff8 broadcast 192.168.0.7
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:15:17:78:fd:56
inet 192.168.101.1 netmask 0xffffff00 broadcast 192.168.101.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:15:17:78:fb:41
inet 192.168.102.1 netmask 0xffffff00 broadcast 192.168.102.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1e:c9:db:24:7d
inet 192.168.103.1 netmask 0xffffff00 broadcast 192.168.103.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33204
ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric
0 mtu 1492
inet 11.11.11.11 --> 12.12.12.2 netmask 0xffffffff
ng1: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric
0 mtu 1492
ng2: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric
0 mtu 1492
nestat -nr:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.2 UGS 0 13812 bce0
192.168.0.0/29 link#1 UC 0 0 bce0
12.12.12.2 11.11.11.11 UH 0 0 ng0
33.33.33.33 lo0 UHS 0 4797 lo0
22.22.22.22 lo0 UHS 0 1370 lo0
11.11.11.11 lo0 UHS 0 0 lo0
127.0.0.1 127.0.0.1 UH 0 0 lo0
192.168.101.0/24 link#2 UC 0 0 em0
192.168.102.0/24 link#3 UC 0 0 em1
192.168.103.0/24 link#4 UC 0 0 bce1
Can you help me please
Thanks in advance
Stamatopoulos Theodoros
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?927edfce0911190736r3f202001h2082052b7922c723>