Date: Tue, 11 Jul 2006 14:50:50 +0400 From: Michael <spampass@gmail.com> To: freebsd-amd64@freebsd.org Subject: Re: Turion 64 X2 support in future versions of FreeBSD. Message-ID: <93f8f44b0607110350o572c1c5ate3af435571908f3f@mail.gmail.com> In-Reply-To: <44AEAC75.7010900@rogers.com> References: <93f8f44b0607061447k27adb556u306063b09b3d9b0d@mail.gmail.com> <200607061818.46985.jkim@FreeBSD.org> <93f8f44b0607071133h34b69eb7oc6874c3ec839e4fc@mail.gmail.com> <44AEAC75.7010900@rogers.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 7/7/06, Mike Jakubik <mikej@rogers.com> wrote: > Michael wrote: > > > > Thanks for advice! I've tried that, but no luck - absolutely the same > > result. The reason why I was asking about *support* for that processor > > is, that there is no mention for X2 in > > http://www.freebsd.org/platforms/amd64.html. Only Turion 64, and no > > X2. And personally I think, that things breaks because of second core > > of CPU :-\ > > It's still a x86-64 CPU. The problem is most likely with the bios/acpi. I think so, and hope this will be fixed in 6.2. Here goes my dmesg with ACPI disabled, i was trying to get dmesg with ACPI enabled but got text files contained ^@ things... Is there anything else I can give?.. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 7 04:15:57 UTC 2006 root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-52 (1607.33-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> Cores per package: 2 real memory = 1073479680 (1023 MB) avail memory = 1024266240 (976 MB) kbd1 at kbdmux0 cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <PCI-PCI bridge> at device 3.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <network, ethernet> at device 0.0 (no driver attached) pcib2: <PCI-PCI bridge> at device 4.0 on pci0 pci2: <PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <processor> at device 10.3 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xdcebe000-0xdcebefff irq 11 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdcebfc00-0xdcebfcff irq 7 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered ugen0: Syntek USB2.0, rev 2.00/0.05, addr 2 atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib3: <PCI-PCI bridge> at device 16.0 on pci0 pci3: <PCI bus> on pcib3 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xdf800000-0xdf800fff irq 11 at device 1.0 on pci3 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <Ricoh R5C552> mem 0xdf7ff000-0xdf7ff7ff irq 5 at device 1.1 on pci3 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:5a:a9:a6 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:5a:a9:a6 fwe0: Ethernet address: 02:e0:18:5a:a9:a6 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci3: <base peripheral> at device 1.2 (no driver attached) pci3: <base peripheral> at device 1.3 (no driver attached) pci3: <network> at device 3.0 (no driver attached) pci0: <multimedia> at device 16.1 (no driver attached) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ugen1: vendor 0x0b05 product 0x1712, rev 2.00/19.15, addr 3 Timecounter "TSC" frequency 1607325151 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062a040, 0) error 6 acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/AS04> at ata0-master UDMA33 ad2: 95396MB <HTS541010G9AT00 MBZOA60A> at ata1-master UDMA100 Trying to mount root from ufs:/dev/ad2s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?93f8f44b0607110350o572c1c5ate3af435571908f3f>