Date: Fri, 6 Oct 95 10:08:07 +0100 From: Armando Ferreira <armando_ferreira@il.us.swissbank.com> To: questions@FreeBSD.ORG Subject: Help ! Problem with Ethernet card Message-ID: <9510060908.AA14238@ln1d278nwk>
next in thread | raw e-mail | index | archive | help
Hi,
I am having trouble installing a Western Digital card on my PC.
The configuration I used in to configure the kernel was
device ed0 at isa? port 0x300 net irq 5 iomem 0xCA000 vector edintr
I changed the jumpers on the card to match the above irq and memory address
configuration. and I get the following problem at boot time:
>>ed0: failed to clear shared memory at ca000 - check configuration<<
Can you please tell me if there is something else to setup or if I have done
something wrong ?
Thanks,
Armando.
Below is the complete output from dmesg:
FreeBSD 2.0.5-RELEASE #0: Thu Oct 5 17:48:18 BST 1995
root@tuna.dolcom.co.uk:/usr/src/sys/compile/MYKERNEL
CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 33161216 (8096 pages)
avail memory = 30830592 (7527 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0: failed to clear shared memory at ca000 - check configuration
ed0 not found at 0x300
psm0 at 0x60-0x63 irq 12 on motherboard
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the pci0 bus:
configuration mode 1 allows 32 devices.
pci0:0: INTEL CORPORATION, device=0x122d, class=bridge [not supported]
pci0:7: INTEL CORPORATION, device=0x122e, class=bridge [not supported]
ahc0 <Adaptec 294X SCSI host adapter> rev 3 int a irq 11 on pci0:17
ahc0: reading board settings
ahc0: 294x Single Channel, SCSI Id=7, aic7870, 16 SCBs
ahc0: Downloading Sequencer Program...Done
ahc0: Probing channel A
ahc0 waiting for scsi devices to settle
ahc0: target 0 synchronous at 10.0MB/s, offset = 0xf
(ahc0:0:0): "Quantum XP32150 576D" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2050MB (4199760 512 byte sectors)
ahc0: target 2 synchronous at 4.4MB/s, offset = 0x8
(ahc0:2:0): "WangDAT Model 3200 03.0" type 1 removable SCSI 2
st0(ahc0:2:0): Sequential-Access density code 0x13, drive empty
ahc0: target 3 synchronous at 5.0MB/s, offset = 0xf
(ahc0:3:0): "MATSHITA CD-ROM CR-504 ST23" type 5 removable SCSI 2
cd0(ahc0:3:0): CD-ROM
cd0(ahc0:3:0): NOT READY asc:3a,0 Medium not present
can't get the size
vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:19
pci0: uses 33558528 bytes of memory from 40000000 upto fffdffff.
pci0: uses 256 bytes of I/O space from f800 upto f8ff.
changing root device to sd0a
WARNING: / was not properly dismounted.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9510060908.AA14238>