Date: Mon, 27 Aug 2018 11:21:13 +0200 From: Philipp Vlassakakis <freebsd-en@lists.vlassakakis.de> To: ixbug@riseup.net Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: disk or cable error? (CAM status: ATA Status Error) Message-ID: <9A1AD918-BC0D-4A6F-9B7C-EB843886E284@lists.vlassakakis.de> In-Reply-To: <c9124cc8-7be9-a0ad-62f3-2ebebbd00a9b@riseup.net> References: <c9124cc8-7be9-a0ad-62f3-2ebebbd00a9b@riseup.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, What are the SMART values of the hard disks?=20 High "Reallocated Sectors Count" or anything else?=20 I would change the cable and run a SMART-Test on both disks. Also make sure you have recent backups. Regards, > On 26. Aug 2018, at 17:01, ixbug@riseup.net wrote: >=20 > Hello, >=20 > since 3 days I get these errors on my FreeBSD 11.2 server > which has two (WDC WD1005FBYZ-01YCBB2) disks (ZFS mirror): >=20 > (ada1:ahcich1:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 90 a4 aa 40 1d 00 = 00 00 00 00 > (ada1:ahcich1:0:0:0): CAM status: ATA Status Error > (ada1:ahcich1:0:0:0): ATA status: 41 (DRDY ERR), error: 10 (IDNF ) > (ada1:ahcich1:0:0:0): RES: 41 10 90 a4 aa 00 1d 00 00 00 00 > (ada1:ahcich1:0:0:0): Retrying command > (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 60 38 7e 06 40 2e 00 = 00 00 00 00 > (ada0:ahcich0:0:0:0): CAM status: ATA Status Error > (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 10 (IDNF ) > (ada0:ahcich0:0:0:0): RES: 41 10 38 7e 06 00 2e 00 00 00 00 > (ada0:ahcich0:0:0:0): Retrying command >=20 > note that both affect both disks (ada0 + ada1). >=20 > frequency: about 30 times per day. >=20 > zpool status is fine. >=20 >=20 > since last night also smartctl complains: >=20 > smartctl -a /dev/ada0 (ada1 followed 6 hours later with the same = output) > output: > " > Error 1 occurred > When the command that caused the error occurred, the device was in an = unknown state. >=20 > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 04 51 00 00 00 00 00 Error: ABRT >=20 > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- >=20 > " >=20 > Do any of these errors provide hints as to whether this is a disk = error affecting both at the same time > or broken cable? (both disks are connected to the mainboard via the = same cable) >=20 >=20 > thanks in advance, > ixbug >=20 >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9A1AD918-BC0D-4A6F-9B7C-EB843886E284>