Date: Wed, 25 Apr 2012 17:26:35 +0200 From: Fabien Thomas <fabien.thomas@netasq.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-arm@freebsd.org Subject: Re: Dreamplug : USB support Message-ID: <9A981356-92D4-4C5D-85CD-A3F3483206EB@netasq.com> In-Reply-To: <201204251715.19277.hselasky@c2i.net> References: <39ED732B-A88A-4052-976D-CB13F0CB1C0C@netasq.com> <201204251654.05895.hselasky@c2i.net> <63BD8703-9C0C-468B-A649-6C35FEC4BB0C@netasq.com> <201204251715.19277.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail=_DE609F53-3EA4-436F-8B94-CC83340CE8A4 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=iso-8859-1 Le 25 avr. 2012 =E0 17:15, Hans Petter Selasky a =E9crit : > On Wednesday 25 April 2012 17:05:47 Fabien Thomas wrote: >> Le 25 avr. 2012 =E0 16:54, Hans Petter Selasky a =E9crit : >>> On Wednesday 25 April 2012 16:15:55 Fabien Thomas wrote: >>>> Hi, >>>>=20 >>>> It seems that sometimes USB works on Dreamplug and sometimes not. >>>>=20 >>>> I've included a working dmesg and a full debug output of the = non-working >>>> boot. I've tried to increase the timeout in usb.h but without = success. >>>>=20 >>>> Maybe someone will have a clue for this problem ? >>>>=20 >>>> Fabien >>>>=20 >>>> Success: >>>>=20 >>>> uhub0: 1 port with 1 removable, self powered >>>> Root mount waiting for: usbus0 >>>> ugen0.2: <vendor 0x1a40> at usbus0 >>>> uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr = 2> on >>>> usbus0 Root mount waiting for: usbus0 >>>> uhub1: 4 ports with 4 removable, self powered >>>> Root mount waiting for: usbus0 >>>> Root mount waiting for: usbus0 >>>> ugen0.3: <vendor 0x05e3> at usbus0 >>>> umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/99.10, addr = 3> >>>> on usbus0 umass0: SCSI over Bulk-Only; quirks =3D 0x4000 >>>> umass0:0:0:-1: Attached to scbus0 >>>> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 >>>> da0: <Generic STORAGE DEVICE 9910> Removable Direct Access SCSI-0 = device >>>> da0: 40.000MB/s transfers >>>> da0: 3724MB (7626752 512 byte sectors: 255H 63S/T 474C) >>>=20 >>> Is this a hardware builtin USB device? >>=20 >> This is the SoC USB port that is connected to a hub and then USB to = SD >> controller >> = (https://www.globalscaletechnologies.com/t-dreamplugdetails.aspx#hw_block)= >> . I've not included the info but it was on 8.3 release. >=20 > If it is possible to make a USB trace, that would probably give you = the answer=20 > why it is not working. Can you tell me how to do it ? Thanks, Fabien --Apple-Mail=_DE609F53-3EA4-436F-8B94-CC83340CE8A4--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9A981356-92D4-4C5D-85CD-A3F3483206EB>