Date: Sun, 7 Aug 2005 20:51:05 +0100 From: Kep Woof <kep.woof@gmail.com> To: questions@freebsd.org Subject: Epson Stylus C86 and apsfilter Message-ID: <9c816878050807125150d3cf99@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi, i needed a printer so i checked linuxprinting.org and thought an epson c86 would be a good idea. i'm trying to set it up using usb. now i've googled off and on for a few days now, and seen that people have strong opinions as to whether they use CUPS or not. i tried a few printcap recipies that i wasn't sure how to use, and after more reading saw that the recommended driver for my printer was gimp-print. ideally i'd like something simple, that i can later use with samba, so i was thinking along the lines of lpr or lprng. so more fiddling, and i've got apsfilter and ghostscript-gnu-nox11 installed, and choose the closest driver from the nice apsfilter menu - epson stylus c80. i fill in the other details, and it seems fine - /dev/ulpt0 & a4 - but when i try the test page i get lines of text on the paper as follows: <<?<? <<<<<<< <?<< <<??<< <?< <<<<<<<< <<??<<<<?< for pages and pages. i've not let it finish, just turned off the printer, to save ink. there didn't seem much point in letting it go on. i've tried with other drivers from the same section, but with no joy. here's the last thing apsfilter says before it starts printing the <<?<<'s: Printing Test page using: gs -q -dBATCH -dNOPAUSE -dPARANOIDSAFER -dSAFER -r360x360 -sDEVICE=3Dijs -sPAPERSIZE=3Da4 =20 -sProcessColorModel=3DDeviceRGB -sIjsParams=3D'Quality=3D360sw,ImageType=3D1,MediaType=3DPlain' -sDeviceManufacturer=3DEPSON -sDeviceModel=3D'escp2-c80' =20 -sIjsServer=3Dijsgimpprint -dIjsUseOutputFD=20 -sOutputFile=3D'/tmp/apsfilter1514/test_page.aps' setup/test.ps from dmesg: ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode i've tried running escputil. it moves the print head and displays the following.. #escputil -i -u -r /dev/ulpt0 Escputil version 4.2.7, Copyright (C) 2000-2001 Robert Krawitz Escputil comes with ABSOLUTELY NO WARRANTY; for details type 'escputil -l' This is free software, and you are welcome to redistribute it under certain conditions; type 'escputil -l' for details. Read from printer timed out Read from printer timed out Cannot parse output from printer when i ran it a second time it just repeated the second message: Cannot parse output from printer i've tried with both gnu and afpl ghostscript, for x11 and nox11 on 2 different machines. the printer does work ok from windows, so i guess that rules out cable problems. i've read loads about printers this weekend, and am completely confused. does anyone have any ideas as to how i can go about properly diagnosing and fixing this problem? thanks in advance for any help or suggestions. kep ps. please cc on any replies as i'm not on the list. thanks!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9c816878050807125150d3cf99>