Date: Sun, 27 Mar 2005 14:08:09 -0500 From: Mike Tancsa <mike@sentex.net> To: Randy Bush <randy@psg.com> Cc: freebsd-hardware@freebsd.org Subject: Re: SMART threshold exceeded Message-ID: <9q0e41hes7v712m6gfmgbqt678e6acvofl@4ax.com> In-Reply-To: <16966.16995.39355.590805@roam.psg.com> References: <16966.16995.39355.590805@roam.psg.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 26 Mar 2005 21:19:31 -0800, in sentex.lists.freebsd.hardware you wrote: >i suspect that this > > twe0: AEN: <twe0: port 0: SMART threshold exceeded> > >is not a good sign. googling tells me it's a failure, but >not whether it is soft or hard. The disk on Port 0 in this case. The smartmontools can speak to disks behind a 3ware both on RELENG_4 and RELENG_5 to get more info. smartctl -a -d 3ware,0 /dev/twed1 or to talk to the disk on port 1 smartctl -a -d 3ware,1 /dev/twed1 eg backup2# smartctl -a -d 3ware,0 /dev/twed1 smartctl version 5.33 [i386-unknown-freebsd4.9] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: ST380011A Serial Number: 3JV3WT64 =46irmware Version: 3.16 User Capacity: 80,000,000,000 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Sun Mar 27 14:03:21 2005 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever=20 been run. Total time to complete Offline=20 data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine=20 recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 063 060 006 Pre-fail Always - 15260897 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 116204100 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10357 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 30 194 Temperature_Celsius 0x0022 042 049 000 Old_age Always - 42 195 Hardware_ECC_Recovered 0x001a 063 060 000 Old_age Always - 15260897 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9451 - # 2 Short offline Completed without error 00% 9427 - # 3 Short offline Completed without error 00% 9404 - # 4 Short offline Completed without error 00% 9380 - # 5 Short offline Completed without error 00% 9357 - # 6 Short offline Completed without error 00% 9333 - # 7 Short offline Completed without error 00% 9309 - # 8 Short offline Completed without error 00% 9286 - # 9 Short offline Completed without error 00% 9262 - #10 Short offline Completed without error 00% 9239 - #11 Short offline Completed without error 00% 9215 - #12 Short offline Completed without error 00% 9192 - #13 Short offline Completed without error 00% 9168 - #14 Short offline Completed without error 00% 9144 - #15 Short offline Completed without error 00% 9121 - #16 Short offline Completed without error 00% 9097 - #17 Short offline Completed without error 00% 9074 - #18 Short offline Completed without error 00% 9050 - #19 Short offline Completed without error 00% 9027 - #20 Short offline Completed without error 00% 9003 - #21 Short offline Completed without error 00% 8980 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. backup2#=20 -------------------------------------------------------- Mike Tancsa, Sentex communications http://www.sentex.net Providing Internet Access since 1994 mike@sentex.net, (http://www.tancsa.com)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9q0e41hes7v712m6gfmgbqt678e6acvofl>