Date: Wed, 15 Jul 2009 17:49:34 +0000 From: "Hayer, Sukhjinder" <sukhjinder.hayer@hp.com> To: "ia64@freebsd.org" <ia64@freebsd.org> Subject: FW: 8.0 BETA1 boot problem Message-ID: <A11E4A1228B2004E90D83FEB372C90133F16CABA40@GVW0671EXC.americas.hpqcorp.net>
next in thread | raw e-mail | index | archive | help
Hi,
Iam trying to boot 8.0 BETA1 on the IA 64 integrity server platform and I =
see some Mpt0 not being able to initiliaze. Does any one have an idea as to=
what might be the problem. Below
Is the part of the boot output with "boot_verbose=3D2" being set.
pci0: <unknown> at device 1.0 (no driver attached)
pci0: <simple comms> at device 1.1 (no driver attached)
pci0: child uart0 requested type 4 for rid 0x14, but the BAR says it isuart=
0: <Non-standard ns8250 class UART with FIFOs> mem 0x88033000-0x88033fff ir=
q 16 at device 1.2 on pci0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at de=
vice 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88032000
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at de=
vice 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88031000
ohci1: [MPSAFE]
ohci1: [ITHREAD]
usbus1: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19=
at device 2.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0x88030000
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x80000000-0x87fff=
fff,0x88020000-0x8802ffff at device 3.0 on pci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
found-> vendor=3D0x1000, dev=3D0x0054, revid=3D0x01
domain=3D0, bus=3D1, slot=3D1, func=3D0
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D32 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x0a =
(2500 ns)
intpin=3Da, irq=3D0
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 1 message in map 0x14
map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled
map[14]: type Memory, range 64, base 0xa0470000, size 14, enabled
map[1c]: type Memory, range 64, base 0xa0460000, size 16, enabled
pcib1: matched entry for 1.1.INTA
pcib1: slot 1 INTA hardwired to IRQ 27
found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10
domain=3D0, bus=3D1, slot=3D2, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0146, statreg=3D0x02b0, cachelnsz=3D32 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D29
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xa0450000, size 16, enabled
pcib1: matched entry for 1.2.INTA
pcib1: slot 2 INTA hardwired to IRQ 29
found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10
domain=3D0, bus=3D1, slot=3D2, func=3D1
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0146, statreg=3D0x02b0, cachelnsz=3D32 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Db, irq=3D30
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xa0440000, size 16, enabled
pcib1: matched entry for 1.2.INTB
pcib1: slot 2 INTB hardwired to IRQ 30
mpt0: <LSILogic SAS/SATA Adapter> mem 0xa0470000-0xa0473fff,0xa0460000-0xa0=
46ffff irq 27 at device 1.0 on pci1
mpt0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x1100
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1100
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xa0470000
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: soft reset failed: device not running
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:0)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:1)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:2)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:3)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:4)
mpt0: soft reset failed: device not running
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
Thanks
Sukhjinder=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A11E4A1228B2004E90D83FEB372C90133F16CABA40>